4 layers469.6 × 69.6 mm
McpElectronicsv2
Starman3787/flightSimBuildB738
Project to build parts of a flight simulator for a Boeing 737-800
367 parts1MIT
4 layers472 × 72 mm
McpElectronics
Starman3787/flightSimBuildB7381Project to build parts of a flight simulator for a Boeing 737-800
- Size
- 472 × 72 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 376
- Nets
- 292
- Pads
- 1,186
- Tracks, vias
- 2,520, 280
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 5 Dec 2023
- Updated
- 18 May 2024
Overview
McpElectronics is an open-source printed circuit board by Starman3787, from the Starman3787/flightSimBuildB738 repository on GitHub, published under the MIT licence. It is a 4-layer board of 472 × 72 mm with 376 parts on 292 nets, routed with 2,520 tracks and 280 vias.
It is built around the LD1085V50, LD1117V33 and C945, with the S8050 among its other parts. Its parts include 149 resistors, 70 capacitors, 51 transistors, 39 connectors and 31 diodes. It belongs with the STM32 boards of this library.
Main components
4
LD1085V50
TO-220-40℃~+125℃@(Tj) 0.003%Vout 1 1.5V@(3A) 30V 3A 5V 5mA 72dB@(120Hz) Fixed Over Temperature Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LD1117V33
TO-2200℃~+125℃@(Tj) 1 1.2V@(800mA) 100uV 15V 3.3V 5mA 75dB@(120Hz) 800mA Fixed Over Current Protection、Thermal Shutdown Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
C945
SOT-23-55℃~+150℃ 1 NPN 100nA 150MHz 150mA 200mW 300mV 400 50V 5V NPN SOT-23 Bipolar (BJT) ROHSALJBipolar (BJT)S8050
SOT-23-55℃~+150℃ 1 NPN 100MHz 100nA 120 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
README
README.mdflightSimBuildB738
Project to build parts of a flight simulator for a Boeing 737-800
Parts
376| Qty | Value | Footprint | References |
|---|---|---|---|
| 92 | 560R | Resistor_SMD:R_0402_1005Metric | R1, R10, R11, R12, R13, R14, R15, R16, R17, R100, R101, R102, R103, R104, R105, R106 +76 |
| 41 | C945 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20, Q21, Q22, Q23 +25 |
| 38 | 100n | Capacitor_SMD:C_0402_1005Metric | C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25 +22 |
| 31 | LED | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +15 |
| 24 | 10k | Resistor_SMD:R_0402_1005Metric | R110, R111, R112, R113, R114, R115, R116, R117, R118, R119, R120, R121, R122, R123, R124, R125 +8 |
| 22 | 1u | Capacitor_SMD:C_0402_1005Metric | C1, C40, C45, C46, C49, C50, C51, C52, C53, C54, C55, C56, C57, C58, C59, C60 +6 |
| 21 | WHITE_7_SEGMENT_LED | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J18, J19, J20, J21, J22, J23, J24, J25, J26, J27, J28, J29, J30, J31, J32, J33 +5 |
| 14 | 330R | Resistor_SMD:R_0402_1005Metric | R59, R60, R61, R62, R63, R64, R65, R66, R67, R68, R69, R70, R71, R72 |
| 12 | 4k7 | Resistor_SMD:R_0402_1005Metric | R138, R139, R140, R141, R142, R143, R144, R145, R146, R147, R148, R149 |
| 10 | S8050 | Package_TO_SOT_THT:TO-92_Inline | Q25, Q26, Q27, Q28, Q29, Q30, Q31, Q32, Q33, Q34 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_4.3mm_M4_ISO7380_Pad | H1, H2, H3, H4 |
| 2 | 100u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C69, C70 |
| 2 | 10n | Capacitor_SMD:C_0402_1005Metric | C42, C47 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C2, C67 |
| 2 | 2u2 | Capacitor_SMD:C_0402_1005Metric | C36, C37 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R108, R109 |
| 1 | 0R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R107 |
| 1 | 120R | Inductor_SMD:L_0402_1005Metric | FB1 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R132 |
| 1 | 22k | Resistor_SMD:R_0402_1005Metric | R136 |
| 1 | 2k2 | Resistor_SMD:R_0402_1005Metric | R133 |
| 1 | 470u | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C68 |
| 1 | 4u7 | Capacitor_SMD:C_0402_1005Metric | C38 |
| 1 | 5k6 | Resistor_SMD:R_0402_1005Metric | R134 |
| 1 | A/P_DISENGAGE_BUTTON | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J15 |
| 1 | A/T ARM | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW11 |
| 1 | A/T_TOGGLE_RESET_ELECTROMAGNET | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | ALT HLD | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW18 |
| 1 | ALT INTV | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW19 |
| 1 | ALTITUDE Knob | Rotary_Encoder:RotaryEncoder_Bourns_Vertical_PEC12R-3x17F-Nxxxx | SW17 |
| 1 | APP | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW14 |
| 1 | BACKLIGHT_BULB_0 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | BACKLIGHT_BULB_1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | BACKLIGHT_BULB_2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | BACKLIGHT_BULB_3 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | BACKLIGHT_BULB_4 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | BACKLIGHT_BULB_5 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | BACKLIGHT_BULB_6 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | BACKLIGHT_BULB_7 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | BACKLIGHT_BULB_8 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J12 |
| 1 | BACKLIGHT_BULB_9 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J13 |
| 1 | Bank Angle Selector | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J16 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal | J39 |
| 1 | C/O | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW7 |
| 1 | CMD A | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW21 |
| 1 | CMD B | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW23 |
| 1 | CWS A | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW22 |
| 1 | CWS B | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW24 |
| 1 | Captain Course Knob | Rotary_Encoder:RotaryEncoder_Bourns_Vertical_PEC12R-3x17F-Nxxxx | SW3 |
| 1 | F/D A | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW25 |
| 1 | F/D B | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW26 |
| 1 | First Officer Course Knob | Rotary_Encoder:RotaryEncoder_Bourns_Vertical_PEC12R-3x17F-Nxxxx | SW2 |
| 1 | HDG SEL | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW13 |
| 1 | HEADING Knob | Rotary_Encoder:RotaryEncoder_Bourns_Vertical_PEC12R-3x17F-Nxxxx | SW15 |
| 1 | IAS MACH Knob | Rotary_Encoder:RotaryEncoder_Bourns_Vertical_PEC12R-3x17F-Nxxxx | SW6 |
| 1 | LD1085V50 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | LD1117V33 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | LNAV | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW12 |
| 1 | LOGO | LOGO | G*** |
| 1 | LVL CHG | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW4 |
| 1 | N1 | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW5 |
| 1 | SPD INTV | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW8 |
| 1 | SPEED | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW10 |
| 1 | ST-Link_Conn | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J17 |
| 1 | STM32F429ZETx | Package_QFP:LQFP-144_20x20mm_P0.5mm | U15 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J14 |
| 1 | V/S | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW27 |
| 1 | VERT SPEED Knob | Rotary_Encoder:RotaryEncoder_Bourns_Vertical_PEC12R-3x17F-Nxxxx | SW20 |
| 1 | VNAV | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW9 |
| 1 | VOR LOC | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW16 |
| 1 | WHITE_ALPHANUMERIC_LED | Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical | J3 |
| 1 | WHITE_PLUS_MINUS_LED | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
More from Starman3787/flightSimBuildB738
1Similar boards
- 2 layers53.3 × 81.3 mm
L0ckcr4ck3r
Mew463/Project-l0ckcr4ck3r
I've always wanted to build a robot that actually decodes locks while maintaining a cool desk toy vibe! I am quite happy with the user-oriented design and doubles as a nice fidgety-toy-thing to play with.
19 parts66MIT - 2 layers51.8 × 41.7 mm
PayloadPrototypeBoard
Case-Rocket-Team/PayloadPrototypeBoard2021
Prototype Payload Board for the 2021 ESRA Payload using Parafoil Guidance. KiCad Project
84 parts2 - 4 layers95.3 × 47 mm
- 2 layers105 × 142.5 mm
TestStand
ibsal/LERT
LERT will launch humans to space in 2 months, please give me 10 trillion dollars pls
116 parts1 - 2 layers130 × 95 mm
PlantBreakoutBoard
sirihallqvist/PlantBreakoutBoard
Run the following commands to update and download dependencies.
61 parts1 - 2 layers196.2 × 130.8 mm
/CaelusPCB.kicad_pcb.jpg?size=s&soon)
- 2 layers300 × 105 mm
- 2 layers65 × 106.5 mm
Questions
How big is the McpElectronics PCB?
It measures 472 × 72 mm and has 4 copper layers, 1.61 mm thick.
What parts does the McpElectronics use?
376 parts, built around the LD1085V50, LD1117V33, C945 and S8050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the McpElectronics KiCad files?
From the Starman3787/flightSimBuildB738 repository on GitHub, at the commit this page was made from: the board is cockpit/panels/MCP/hardware/electronics/mcpElectronics/mcpElectronics.kicad_pcb and its schematic cockpit/panels/MCP/hardware/electronics/mcpBacklight/mcpBacklight.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the McpElectronics design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).