Skip to the content
2 layers71.5 × 83.7 mmLoRA Dev, the printed circuit board in 3D

RA-01 LoRa

Size
71.5 × 83.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
67
Nets
116
Pads
322
Tracks, vias
897, 334
Pours
20
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
5 Mar 2020
Updated
1 Jul 2020

Overview

LoRA Dev is an open-source printed circuit board by SpyrosCpt, from the SpyrosCpt/RA-01-LoRa repository on GitHub. It is a 2-layer board of 71.5 × 83.7 mm with 67 parts on 116 nets, routed with 897 tracks and 334 vias.

It is built around the CP2102N-A01-GQFN28R. Its parts include 19 capacitors, 18 resistors, 8 ICs, 8 diodes and 6 connectors. It belongs with the radio and wireless boards and the STM32 boards of this library.

Main components

1

README

README.md

RA-01-LoRa Dev Board

Features

  • Max 15V DC input
  • 5V DC USB input
  • CP2102 USB interface
  • STM32F030RCT6
  • 0.96" 128 x 32 OLED
  • RA-01 LoRA Module
  • LM35 Temperature Sensor
  • AT93C46 EEPROM
  • 4 Way DIP Switch
  • 4 Push Buttons
  • STM32 programming by SWD

Firmware Example Provided

  • Press Push Button 1 to Send LoRA Packet, you can change the data to send by editing TestLoraTransmit("packet to send")
  • When not transmitting LoRA radio is in Receiver mode and will display any messages receievd
  • Temperature Monitoring of LM35 will be displayed on OLED

Hardware Version 1.1

alt text

Firmware Change Log

  • Changed frequency down from 915Mhz to 433MHz
  • Oled working
  • LoRa working
  • EEPROM working
  • Temp Sensor

Harware Change Log

  • Removed USB protection IC
  • Swapped TX and RX lines
  • Grounded pin 16 + 17 on OLED connector
  • Moved LM34 Vcc from 3.3V to 5V

Parts

67
QtyValueFootprintReferences
7C_100nFCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC1, C2, C3, C4, C5, C6, C17
7R_330RResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR1, R2, R3, R4, R10, R12, R18
6D_LED_RLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1, D2, D3, D4, D7, D8
5C_1uFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC12, C13, C14, C15, C16
5R_10KResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR5, R6, R7, R8, R13
4SW_PushButton_Switch_SMD:SW_SPST_PTS645SW2, SW3, SW4, SW5
2C_10uF/16VCapacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C_Pad2.25x2.35mm_HandSolderC10, C11
2C_2U2F2Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC18, C19
10.96_OLED_128X64LoRA:0.96_OLEDU5
1Ai-Thinker-Ra-01RF_Module:Ai-Thinker-Ra-01-LoRaU6
1Barrel_Jack_SwitchConnector_BarrelJack:BarrelJack_HorizontalJ2
1CONN_CURRENT_MEASUREConnector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_VerticalJ3
1CONN_PGMConnector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalJ1
1CP2102N-A01-GQFN28Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mmU8
1C_1000uF/10VCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC9
1C_330uF/35VCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC7
1C_470pFCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC8
1Conn_01x02_MaleConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ5
1Conn_CoaxialConnector_Coaxial:SMA_Amphenol_132134_VerticalJ6
1D_P6SMBJ26Diode_SMD:D_SMBD5
1D_SK14Diode_SMD:D_SMBD6
1F_SMD2920P150TSAFuse:Fuse_2920_7451Metric_Pad2.10x5.45mm_HandSolderF1
1Fuse_SmallCapacitor_SMD:C_0805_2012MetricF2
1IC_AT93C46Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1IC_LM1117MPX-ADJPackage_TO_SOT_SMD:SOT-223-3_TabPin2U4
1IC_MC34063ADPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU3
1IC_STM32F030RCTxPackage_QFP:LQFP-64_10x10mm_P0.5mmU1
1LM35-LPPackage_TO_SOT_THT:TO-92U9
1L_220UHInductor_SMD:L_12x12mm_H8mmL1
1R_12KResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR14
1R_1KResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR11
1R_1K5Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR15
1R_2K7Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR9
1R_390KResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR16
1R_470RResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR17
1SW_4_PIN_DIPButton_Switch_THT:SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mmSW1
1USB_B_MiniConnector_USB:USB_Mini-B_Lumberg_2486_01_HorizontalJ7

Similar boards

  • 2 layers39.6 × 99.1 mmESP32-Eurorack Audio, the printed circuit board in 3D

    ESP32-Eurorack Audio

    ctag-fh-kiel/ctag-tbd

    CTAG TBD >>to be determined<< an extendible open source Eurorack sound module

    128 parts260
  • 2 layers50 × 30 mmLink, the printed circuit board in 3D

    Link

    voltlog/VoltLink

    USB to serial adapter with built-in ESP32 auto-reset circuitry

    79 parts77
  • 2 layers53.5 × 101.8 mmSony scopeman, the printed circuit board in 3D

    Sony scopeman

    lucysrausch/sony-scopeman

    Hardware Design files of a replacement mainboard for the Sony Watchman FD-10. This turns it into a bluetooth and WiFi-enabled vector display.

    135 parts69
  • 2 layers38.5 × 43 mmStepper monitor, the printed circuit board in 3D

    Stepper monitor

    zapta/ble_stepper_motor_analyzer

    A low cost stepper motor analyzer that uses wireless BLE link to display the data in real time on a Windows/Mac/Linux PC.

    58 parts58
  • 2 layers65 × 30 mmEpaper, the printed circuit board in 3D

    Epaper

    TDA-2030/E-ink-screen

    An assistant to help you view text and picture calendars

    56 parts33Apache-2.0
  • 4 layers536.5 × 385.7 mmDC27-badge, the printed circuit board in 3D

    DC27-badge

    netik/dc27_badge

    Defcon 27 "DaBomb!" badge.

    141 parts30Apache-2.0
  • 2 layers123 × 87.5 mmFastLOGIC, the printed circuit board in 3D

    FastLOGIC

    Neumi/fastLOGIC

    An affordable Arduino-based board designed for straightforward (industrial) logic control, ideal for building small-scale automation and control solutions.

    180 parts23MIT

Questions

How big is the LoRA Dev PCB?

It measures 71.5 × 83.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LoRA Dev use?

67 parts, built around the CP2102N-A01-GQFN28R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LoRA Dev KiCad files?

From the SpyrosCpt/RA-01-LoRa repository on GitHub, at the commit this page was made from: the board is Hardware/LoRA_Dev.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the LoRA Dev design in my own project?

Its repository states no licence, so its author keeps all rights: ask SpyrosCpt before reusing the design.