2 layers82.3 × 70.8 mm
2 layers68.7 × 64.9 mm
SpindlyVR
SpindlySpider/spindlyVR- Size
- 68.7 × 64.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 66
- Pads
- 209
- Tracks, vias
- 528, 53
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 26 Nov 2025
- Updated
- 19 May 2026
Overview
SpindlyVR is an open-source printed circuit board by SpindlySpider, from the SpindlySpider/spindlyVR repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 68.7 × 64.9 mm with 65 parts on 66 nets, routed with 528 tracks and 53 vias.
It is built around the MCP33131-10-E/MS, QMC5883P and 74HC4051, with the MPU-6500 among its other parts. Its parts include 31 capacitors, 17 resistors, 7 ICs, 3 inductors and 1 switch. It belongs with the nRF52 and nRF5x boards of this library.
Main components
4
MCP33131-10-E/MS
MSOP-10-40℃~+125℃ 1 1.7V~1.9V 16 1MHz 2.2LSB 60MHz 800nA 86.7dB Built-in External No SAR SPI MSOP-10 Analog to Digital Converters (ADC) ROHSMicrochip TechnologyAnalog To Digital Converters (ADC)
QMC5883P
LGA-16(3x3)-40℃~+85℃ 16bit 2.5V~3.6V 35uA I2C ±3mT ±3mT LGA-16(3x3) 3D Magnetic Sensors ROHSQST3D Magnetic Sensors
74HC4051
SOP-16-40℃~+85℃ 1 170MHz 28ns 29ns 3V~9V 5ns 5pF 80Ω 8:1 SOP-16 Analog Switches, Multiplexers ROHSWuxi I-core ElecAnalog Switches, Multiplexers
MPU-6500
QFN-24-40℃~+85℃ 16bit 6uA Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(3x3) Accelerometers ROHSTDK InvenSenseAccelerometers
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0.1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C11, C18, C25, C26, C27, C28, C29, C30, C31 |
| 6 | 330pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C6, C10, C12, C17, C19 |
| 6 | 6.8K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R6, R9, R11, R14, R16 |
| 4 | 750 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8, R10, R13, R15 |
| 3 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5, C13, C20 |
| 3 | 1nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7, C14, C21 |
| 3 | 2.2K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7, R12, R17 |
| 3 | 47nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C9, C16 |
| 2 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 2 | 10nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8, C15 |
| 2 | 2.2nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C23, C24 |
| 2 | 2mH | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | L3, L4 |
| 2 | NCS20034DR2G | Library:NCS20034DR2G | U4, U7 |
| 1 | 0.47uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4 |
| 1 | 0.7mH | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | L1 |
| 1 | 2.2nf | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C22 |
| 1 | 33nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 51 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 510 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 74HC4051 | Library:74HC4051-chip | U6 |
| 1 | Battery | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | BT1 |
| 1 | LOGO | Library:cat2_silk | G*** |
| 1 | MCP33131-10-E/MS | Library:MCP33131 | U8 |
| 1 | MPU-6500 | Library:MPU-6500 | U2 |
| 1 | QMC5883P | Library:QMC5883P | U3 |
| 1 | SW_SPDT | Library:EG1218 | SW1 |
| 1 | nice_nano | nice nano:nice_nano | U1 |
The 61 most common of 65 parts.
More from SpindlySpider/spindlyVR
2- 10 layers121.9 × 101.6 mm
Similar boards
- 4 layers51 × 59 mm
- 2 layers94 × 94 mm
3axis magnitometer
NarodniySputnik/Gladiolus-1
Gladiolus-1 - автономный модуль для приема и передачи изображений в формате SSTV (Slow Scan TeleVision) на малом космическом аппарате (МКА) формата CubeSat
96 parts9GPL-3.0 - 8 layers22.3 × 77.5 mm
Tinker mantis
Tinkerbug-Robotics/TinkerRocket
Model rocket flight computer, ground station, iOS app, and simulation
279 parts1GPL-3.0 - 2 layers50 × 50 mm
- 4 layers37 × 37 mm
NSSFC
Keyaan-07/NSSFC
NSSFC is an FPV flight controller made with the STM32F405 and it has an IMU, Barometric pressure sensor and a magnetometer. It uses the betaflight as firmware(thus no firmware directory in this repository).
97 parts - 4 layers59.5 × 117 mm
- 2 layers9 × 57.6 mm
- 2 layers45 × 48 mm
Aetherpose custom
thousandflame1000/aetherpose
2026-10-18。已選方向：沿用 Arduino Nano 33 BLE 原版 ABX00030／帶針 ABX00034（LSM9DS1），製作供電與固定底板；六個穿戴位置各用一套。
44 parts
Questions
How big is the SpindlyVR PCB?
It measures 68.7 × 64.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SpindlyVR use?
65 parts, built around the MCP33131-10-E/MS, QMC5883P, 74HC4051 and MPU-6500. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SpindlyVR KiCad files?
From the SpindlySpider/spindlyVR repository on GitHub, at the commit this page was made from: the board is pcb/rx/rx.kicad_pcb and its schematic pcb/rx/rx-proto0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SpindlyVR design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).