2 layers140 × 60 mm
2 layers140 × 60 mm
BMS PDB V2
SoulOfNoob/SoulOfBMS- Size
- 140 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 87
- Nets
- 137
- Pads
- 374
- Tracks, vias
- 17, 42
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 16 Apr 2023
- Updated
- 25 Jun 2024
Overview
BMS PDB V2 is an open-source printed circuit board by SoulOfNoob, from the SoulOfNoob/SoulOfBMS repository on GitHub. It is a 2-layer board of 140 × 60 mm with 87 parts on 137 nets, routed with 17 tracks and 42 vias.
It is built around the ADS1115IDGS, NMUX1308PWJ and BUK9M11-40EX. Its parts include 27 connectors, 12 resistors, 10 ICs, 7 capacitors and 5 transistors. It belongs with the power boards of this library.
Main components
3
ADS1115IDGS
MSOP10Ultra-Small, Low-Power, 4 Channels 16-Bit Analog-to-Digital Converter with Internal ReferenceTexas InstrumentsUncategorised
NMUX1308PWJ
TSSOP-16TSSOP-16 Analog Switches, Multiplexers ROHSNexperiaAnalog Switches, Multiplexers
BUK9M11-40EX
SOT-1210-55℃~+175℃ 1 N-channel 1.721nF 125pF 13.4nC@5V 2.1V 40V 53A 62W 9mΩ@10V SOT-1210 MOSFETs ROHSNexperiaMOSFETs
Parts
87| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 +10 |
| 6 | 0 Ω | Resistor_SMD:R_0402_1005Metric | R6, R8, R9, R10, R11, R12 |
| 6 | 10 kΩ | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R5, R7 |
| 6 | 10nf | Resistor_SMD:R_0603_1608Metric | C2, C3, C4, C5, C6, C7 |
| 6 | ACS712xLCTR-30A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4, U5, U6, U7, U8, U9 |
| 5 | BUK9M11-40EX | Package_TO_SOT_SMD:LFPAK33 | Q1, Q3, Q4, Q5, Q6 |
| 5 | Fuse 6 | Fuseholder3557:Fuseholder3557 | J31, J32, J34, J35, J36 |
| 5 | Output 6 | Connector_AMASS:AMASS_XT30U-M_1x02_P5.0mm_Vertical | J23, J25, J26, J28, J29 |
| 2 | ADS1115IDGS | Package_SO:TSSOP-10_3x3mm_P0.5mm | U2, U3 |
| 2 | BMS Switch | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J9, J10 |
| 1 | 100nf | Resistor_SMD:R_0603_1608Metric | C1 |
| 1 | 12V DC Conv. | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | 3.3V DC Conv. | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | BMS (B-) | MountingHole:MountingHole_3.5mm_Pad_Via | J2 |
| 1 | BMS (C-) | MountingHole:MountingHole_3.5mm_Pad_Via | J3 |
| 1 | BMS Bal | Connector_JST:JST_XH_B7B-XH-A_1x07_P2.50mm_Vertical | J16 |
| 1 | BMS Serial | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J14 |
| 1 | BT Module | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J13 |
| 1 | BT Switch | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J12 |
| 1 | Batt Bal | Connector_JST:JST_XH_B7B-XH-A_1x07_P2.50mm_Vertical | J17 |
| 1 | Battery | Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_Vertical | J8 |
| 1 | ESP Switch | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | LED Out | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J11 |
| 1 | LED Switch | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J7 |
| 1 | MCP23017_ML | Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.25x4.25mm | U1 |
| 1 | NMUX1308PWJ | NMUX1308PWJ:NMUX1308PWJ | IC1 |
| 1 | OLED | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J1 |
| 1 | Panel Bal | Connector_JST:JST_XH_B7B-XH-A_1x07_P2.50mm_Vertical | J15 |
More from SoulOfNoob/SoulOfBMS
3- 2 layers140 × 60 mm
- 2 layers110 × 46 mm
Similar boards
- 2 layers115.2 × 22.5 mm
- 4 layers187 × 352.1 mm
- 4 layers70 × 43 mm
USMU v10
joeltroughton/uSMU
Credit card-sized, USB-powered 4 quadrant source-measure unit hardware and firmware
137 parts187 - 4 layers66.3 × 40.2 mm
Cm4 drone
dridri/bcflight
Raspberry Pi based drone flight controller and remote control
56 parts175GPL-3.0 - 4 layers192.1 × 126.9 mm
Stradex1
Bylin-code/Stradex1
STRADEX1 Documentation and Build Instructions ============== I've always wanted to put my violin skills to use in a MIDI environment, but there really isn't a controller on the market that can emulate the feel of a…
24 parts101 - 4 layers100 × 49.8 mm
- 2 layers96 × 74.4 mm
Monolith
luftaquila/monolith
DIY wireless real-time datalogging platform for Student Formula and Baja.
138 parts45 - 4 layers160 × 73.2 mm
MainPCB
doppelgrau/esp32-f9p-io-board
An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.
162 parts39
Questions
How big is the BMS PDB V2 PCB?
It measures 140 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BMS PDB V2 use?
87 parts, built around the ADS1115IDGS, NMUX1308PWJ and BUK9M11-40EX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BMS PDB V2 KiCad files?
From the SoulOfNoob/SoulOfBMS repository on GitHub, at the commit this page was made from: the board is KiCad/BMS_PDB_V2/BMS_PDB_V2.kicad_pcb and its schematic KiCad/BMS_PDB/BMS_PDB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BMS PDB V2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask SoulOfNoob before reusing the design.