

4 кнопочный контроллер для PUBG
- Size
- 55 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 24
- Pads
- 88
- Tracks, vias
- 218, 13
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 17 Apr 2025
- Updated
- 18 Apr 2025
Overview
PUBG KEY is an open-source printed circuit board by Solderingironspb, from the Solderingironspb/Keyboard-for-PUBG repository on GitHub. It is a 2-layer board of 55 × 30 mm with 30 parts on 24 nets, routed with 218 tracks and 13 vias.
It is built around the CH32V203F6P6 and AMS1117-3.3. Its parts include 12 capacitors, 10 resistors, 2 ICs, 1 connector and 1 crystal. It belongs with the RISC-V boards of this library.
Main components
2CH32V203F6P6
TSSOP-20TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHSWCH (Nanjing Qinheng Microelectronics)Microcontrollers (MCU/MPU/SOC)AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdKeyboard-for-PUBG (4 кнопочный контроллер для игры PUBG)
Проект 4 кнопочного контроллера на RISC-V микроконтроллере CH32V203F6P6 для игры PUBG. При желании можно адаптировать под что угодно...
В основном мне нужны только 2 доп. педали, чтоб удобно было играть - это быстрый присед и рация. Вот ногами и делаю жмяк-жмяк :D
Каким бы бесполезным не казался проект, мол игрульки, детские забавы - а Вы попробуйте поднять USB на данных микроконтроллерах, напишите код. Создайте печатную плату под это все. Разработайте 3D модели устройства и педалей. Это же куча времени и полезного опыта :)
Особенности проекта:
- Печатная плата разработана в KiCad 8
- Есть файлы *.stl для слайсера. Все напечатано на 3D принтере.
- В папке firmware хранятся готовые файлы прошивки CH32V203F6P6 в форматах *.hex и *.bin
- Проект написан в VSCode. Используется toolchain от MRStudio RISC-V_Embedded_GCC12. Makefile присутствует.
- Кнопка для рации: https://www.chipdip.ru/product/pbs-24b-4
- Концевой выключатель для педальки: https://www.chipdip.ru/product/msw-01
- Пружина в педальку: Толщина проволоки 1 мм, диаметр пружины 15 мм, высота пружины 32 мм.
- Винты в педальке: М5 30мм.
- Войлок в педальку для мягкого клика: 4.5 мм (из валенка) :D
- Клей, которым приклеивал войлок и резиновую подошву на педали: 88 Luxe. Рекомендую. Очень хороший клей.
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitor_SMD:C_0603_1608Metric | C3, C4, C7, C8, C9, C10, C11, C12 |
| 7 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R5, R6, R7, R8, R9, R10 |
| 2 | 20 | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | 30pF | Capacitor_SMD:C_0805_2012Metric | C5, C6 |
| 2 | 47uF | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C1, C2 |
| 2 | Key | Diode_SMD:D_0805_2012Metric | Key, Run |
| 1 | 1.5k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 8MHz | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | CH32V203F6P6 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | Debug | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | Debug |
| 1 | KEY_IN | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-6-5.08_1x06_P5.08mm_Horizontal | J3 |
| 1 | USB | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | USB |
Similar boards
- 2 layers26 × 51 mm

- 2 layers80 × 80 mm

- 2 layers240 × 47 mm

- 4 layers14.8 × 14.8 mm

- 2 layers85.5 × 54 mm

RTN Badge NL-2026
holly-hacker/RTN-Badge-2026NL-PCB
The open source hardware of the 2026 RTN badge (NL edition)
90 parts - 2 layers290.1 × 130 mm

- 2 layers26.2 × 45.5 mm

PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0
Questions
How big is the PUBG KEY PCB?
It measures 55 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PUBG KEY use?
30 parts, built around the CH32V203F6P6 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PUBG KEY KiCad files?
From the Solderingironspb/Keyboard-for-PUBG repository on GitHub, at the commit this page was made from: the board is PCB/PUBG_KEY/PUBG_KEY.kicad_pcb and its schematic PCB/PUBG_KEY/PUBG_KEY.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PUBG KEY design in my own project?
Its repository states no licence, so its author keeps all rights: ask Solderingironspb before reusing the design.