Skip to the content
2 layers38 × 22 mmObstacle sensor easyC, the printed circuit board in 3D

Hardware design, BOM, gerbers and 3D files for Obstacle-sensor-qwiic designed by Soldered Electronics.

Size
38 × 22 mm
Copper layers
2
Thickness
1.6 mm
Parts
32
Nets
16
Pads
61
Tracks, vias
94, 20
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20210623)
Created
28 Jan 2025
Updated
14 May 2025

Overview

Obstacle sensor easyC is an open-source printed circuit board by SolderedElectronics, from the SolderedElectronics/Obstacle-sensor-qwiic-hardware-design repository on GitHub. It is a 2-layer board of 38 × 22 mm with 32 parts on 16 nets, routed with 94 tracks and 20 vias.

It is built around the TCRT5000L and DSHP03TS-S. Its parts include 5 resistors, 4 switches, 2 capacitors, 2 ICs and 1 diode. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

Obstacle sensor qwiic Hardware Design

About the Product

The TCRT5000 is an infrared (IR) reflective sensor module that is commonly used for proximity sensing and line-following applications. It consists of an infrared emitter and a phototransistor placed side by side in a compact package. The emitter emits infrared light, which gets reflected off nearby objects, and the phototransistor detects the intensity of the reflected light.

This sensor module is widely used in robotics and automation projects. It can be used to detect the presence or absence of objects by measuring the intensity of reflected infrared light. It is also commonly employed in line-following robots where it can detect and follow lines marked with contrasting colors.

The TCRT5000 operates on a supply voltage typically ranging from 3.3V to 5V. The breakout board provides digital and analog information through the qwiic system. Sensor readings are obtained through qwiic.


Repository Contents

This repository contains all design files for Obstacle sensor qwiic, organized as follows:

  • CAD folder: Contains KiCAD design files, including:
    • Schematics
    • PCB layout
    • Panel PCB layout
    • Source 3D files in Fusion360, if any
    • All files are sorted by version with a detailed change log.
  • OUTPUTS folder: Includes all production-ready files, such as:
    • Bill of Materials (BOM) and interactive BOM (iBOM)
    • PDF versions of schematics
    • 3D .step file of the board
    • 3D-printable models
    • Gerber files for PCB manufacturing
    • Image of the pinout of the board
    • Product image
    • Compliance, legal and generic sales documents

Refer to the Change Log in the CAD folder for details about updates between versions.


Learn More About the Product

Beyond the repository, explore the following resources:

Soldered Verify

Soldered Verify Logo

The Soldered Verify system ensures every board you purchase from Soldered is fully functional. It also provides access to exclusive test data for your product. To get started, find the unique Soldered Verify ID on your product's packaging and enter the ID on the Soldered Verify page to access test results and additional product details.

Soldered Community

soldered-verify-logo

Soldered Community is your go-to place for technical support. Our engineers track and answer all questions posted there, and it’s a great space for the maker community. Get answers to your questions and solutions for your challenges at Soldered Community.

solde.red

solde.red is an ultimate URL shortener and information hub. Access it by typing solde.red/ followed by your product SKU, e.g., solde.red/333000, to find getting-started guides, datasheets, open-source hardware and software files, certifications, images, pinouts, and more. Read more about the shortener here.


Contributing

Contributions are welcome! Here’s how you can get involved:

  • Submit pull requests to enhance the design or fix issues.
  • Report bugs or problems by opening an issue.

We encourage community collaboration to make this product even better.


About Soldered

soldered-logo

Soldered for Makers specializes in designing and manufacturing electronic products tailored for enthusiasts, ranging from hobbyists to professionals. Our portfolio includes electronic boards, sensors, and actuators that are widely utilized in fields such as microelectronics, mechatronics, robotics, programming, and IoT. Every product we offer is designed in-house and built upon open-source hardware and software platforms. Proudly certified and manufactured within the European Union, our catalog likely includes the product you need for your project.

We complement these products with comprehensive tutorials and manuals, product descriptions, schematics, programming codes, and project examples. Our round-the-clock customer and technical support is available for all our products, irrespective of the sales channel. Soldered’s success and services reflect our maker community’s unwavering trust, for which we are deeply grateful. Join our community and create using Soldered products.


License

All Soldered open-source hardware (OSH) is under The TAPR Open Hardware License. Read more in the LICENSE file located in this repository.

Disclaimer:

No warranty - all designs in this repository are distributed in the hope that they will be useful, but without any warranty. They are provided "AS IS", therefore without warranty of any kind, either expressed or implied. The entire quality and performance of what you do with the contents of this repository are your responsibility. In no event Soldered Electronics will be liable for your damages, or losses, including any general, special, incidental, or consequential damage arising out of the use or inability to use the contents of this repository.


Have fun!

Thank you for your support from your fellow makers at Soldered Electronics.

Happy Making!

Parts

32
QtyValueFootprintReferences
7buzzardLabel, , , , , ,
310ke-radionica.com footprinti:0603RR2, R4, R5
2100ne-radionica.com footprinti:0603CC1, C2
2HOLE_3.2mme-radionica.com footprinti:HOLE_3.2mmH1, H2
2LOGOSoldered Graphics:Logo-Front-easyC-5mmG***, G***
2easyC-SMDe-radionica.com footprinti:easyC-connectorK1, K3
12k2e-radionica.com footprinti:0402RR3
1300Re-radionica.com footprinti:0603RR1
1ATTINY404-SSNRe-radionica.com footprinti:SOIC-14U2
1DSHP03TS-Se-radionica.com footprinti:DSHP03TS-SK4
1FIDUCIALe-radionica.com footprinti:FIDUCIAL_23FD1
1HEADER-UPDIe-radionica.com footprinti:HEADER-UPDIK2
1LOGOSoldered Graphics:Logo-Front-Soldered-5mmG***
1LOGOSoldered Graphics:Logo-Back-OSH-3.5mmG***
1LOGOSoldered Graphics:Symbol-Front-MovementG***
1purplee-radionica.com footprinti:0402LEDD1
1tcrt5000Le-radionica.com footprinti:TCRT5000LU1

The 29 most common of 32 parts.

Similar boards

  • 2 layers76.2 × 100.6 mmObstacle sensor easyC, the printed circuit board in 3D

    Obstacle sensor easyC

    SolderedElectronics/Obstacle-sensor-with-easyC-hardware-design

    Hardware design, BOM, gerbers and 3D files for Obstacle-sensor-with-easyC designed by Soldered Electronics.

    260 parts
  • 2 layers214 × 187.9 mmLine follower simple, the printed circuit board in 3D

    Line follower simple

    alientanya/line-follower-PCB

    A modular PCB platform for Fast Line Follower (FLF) robots, designed to prioritize sensor experimentation and component flexibility.

    259 parts2MIT
  • 2 layers160 × 25.7 mmHRPM IR Array, the printed circuit board in 3D

    HRPM IR Array

    Aahil78/HRPM

    HRPM - A High RPM Line Follower for comps

    67 partsGPL-3.0
  • 2 layers365.8 × 174 mmLine follower simple, the printed circuit board in 3D

    Line follower simple

    CptEdward-MP/RM_Electronics_Central_Library

    Over time, every team also writes the same firmware again.

    235 parts
  • 2 layers62 × 47 mmReflectancesensors, the printed circuit board in 3D

    Reflectancesensors

    enph253-2025-team5/line-following-pcb

    18 partsGPL-3.0

Questions

How big is the Obstacle sensor easyC PCB?

It measures 38 × 22 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Obstacle sensor easyC use?

32 parts, built around the TCRT5000L and DSHP03TS-S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Obstacle sensor easyC KiCad files?

From the SolderedElectronics/Obstacle-sensor-qwiic-hardware-design repository on GitHub, at the commit this page was made from: the board is CAD/V1.1.1/Obstacle_sensor_easyC.kicad_pcb and its schematic CAD/V1.0.0/Obstacle_sensor_easyC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Obstacle sensor easyC design in my own project?

Its repository states no licence, so its author keeps all rights: ask SolderedElectronics before reusing the design.