

Main2 circuit V1
2023年高専ロボコン「もぎもぎ!フルーツGOラウンド」Bチーム
- Size
- 144.8 × 99.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 56
- Pads
- 167
- Tracks, vias
- 441, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 8 Jun 2023
- Updated
- 11 Oct 2023
Overview
Main2 circuit V1 is an open-source printed circuit board by SkenHub, from the SkenHub/2023_Robocon_Bteam repository on GitHub, published under the MIT licence. It is a 2-layer board of 144.8 × 99.6 mm with 58 parts on 56 nets, routed with 441 tracks and 0 vias.
Its parts include 19 resistors, 19 diodes, 7 switches, 3 connectors and 1 IC. It belongs with the ESP32 boards of this library.
README
README.md2023_Robocon_Bteam
2023年高専ロボコン「もぎもぎ!フルーツGOラウンド」Bチーム
メンバー
- 機械 ヒロハタ,金子,入谷,斉藤,神鍋 ,今井
- 制御 野口,川崎,笹渕,川口,黒住,佐谷
- 回路 中井,岩井
- 1年 北嶋,真志取
- メイン:野口、川崎,金子
- ピット:渡邉,入谷,北嶋,廣畑,真志取
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | LED | LED_THT:LED_D5.0mm | D2, D3, D4, D5, D6, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20 +3 |
| 18 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5, R6, R7, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21 +2 |
| 7 | SW_DIP_x01 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1, SW2, SW3, SW4, SW5, SW6, SW7 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M1, M2, M3 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, S1 |
| 1 | 510 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 5v | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1 |
| 1 | Conn_02x10_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J1 |
| 1 | ESP32-DEVKITC-32D | ESP32-DEVKITC-32D:MODULE_ESP32-DEVKITC-32D | U2 |
| 1 | gnd | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP2 |
More from SkenHub/2023_Robocon_Bteam
6- 16 layers66 × 71.1 mm

- 2 layers99.3 × 94 mm

- 2 layers73.7 × 78.7 mm

- 2 layers149.9 × 99.1 mm

- 2 layers147.3 × 96.5 mm

- 2 layers150 × 100 mm

Similar boards
- 2 layers252.9 × 77.6 mm

- 2 layers50 × 50 mm

- 2 layers97.3 × 71 mm

ZynScreen v1.5
zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
58 parts156 - 2 layers34 × 46 mm

- 2 layers148 × 81 mm

Communicator pcb
Hack-a-Day/2025-Communicator_Badge
The 2025 Hackaday Supercon RF Communicator Badge
58 parts107MIT - 2 layers53.3 × 36.3 mm

- 2 layers70 × 30.3 mm

Pico 2HP Audio
rheslip/2HPico-Eurorack-Module-Hardware
2HP Eurorack module based on Raspberry Pi Pico 2
58 parts84 - 2 layers35.7 × 34.2 mm

Wideband controller
mck1117/wideband
The firmware/boards directory contains configuration for each board this firmware supports.
58 parts81MIT
Questions
How big is the Main2 circuit V1 PCB?
It measures 144.8 × 99.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Main2 circuit V1 use?
58 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Main2 circuit V1 KiCad files?
From the SkenHub/2023_Robocon_Bteam repository on GitHub, at the commit this page was made from: the board is 回路/main2_circuit_V1/main2_circuit_V1.kicad_pcb and its schematic 回路/Altair_controller_V2/Altair_controller_V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Main2 circuit V1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).