
Battery
SirBramble/The-Typeuwu
The Type Universal Wordtyping Unit DIY Keyboard with magnetic Modules

The Type Universal Wordtyping Unit DIY Keyboard with magnetic Modules
The Typeuwu is an open-source printed circuit board by SirBramble, from the SirBramble/The-Typeuwu repository on GitHub, published under the MIT licence. It is a 4-layer board of 352 × 126 mm with 342 parts on 260 nets, routed with 2,645 tracks and 888 vias.
It is built around the RP2040, W25Q128JVSIQ and SRV05-4, with the AP2112K-3.3, LSF0204QPWRQ1 and CD214A-B240LR among its other parts. Its parts include 105 capacitors, 94 ICs, 91 diodes, 21 resistors and 9 connectors. It belongs with the RP2040 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 99 | 100nF | Capacitor_SMD:C_0603_1608Metric | C10, C11, C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C1100, C1101, C1102, C1103 +83 |
| 88 | D_Small | Diode_SMD:D_0603_1608Metric | D1, D10, D11, D12, D13, D14, D15, D16, D17, D18, D100, D101, D102, D103, D104, D105 +72 |
| 74 | Multi_Hotswap_with_RGB | Keyboard footprints:Multi Hotswap with RGB 1U | U1, U2, U10, U11, U12, U13, U16, U17, U18, U19, U100, U101, U102, U103, U104, U105 +58 |
| 8 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4, H5, H6, H7, H8 |
| 8 | Multi_Hotswap_with_RGB | Keyboard footprints:Multi Hotswap with RGB 1,25U | U42, U55, U56, U57, U59, U60, U61, U62 |
| 6 | 2k2 | Resistor_SMD:R_0603_1608Metric | R13, R16, R17, R18, R19, R20 |
| 5 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R3, R12, R15, R21 |
| 4 | 1u | Capacitor_SMD:C_0603_1608Metric | C3, C6, C15, C16 |
| 4 | Conn_01x04 | Connector_custom:POGO Magnetic 4 Pin 2,2mm Horizontal | J3, J4, J5, J6 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R8, R9 |
| 3 | CD214A-B240LR | Diode_custom:CD214A-B240LR | D01, D02, D03 |
| 2 | 27.4 | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | 8pF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | Conn_01x02 | Connector_custom:POGO Magnetic 2 Pin 2,8mm Horizontal | J8, J9 |
| 2 | R | Resistor_SMD:R_0603_1608Metric | R10, R11 |
| 2 | SJ2-35954B-SMT-TR | SamacSys:SJ235954BSMTTR | S1, S2 |
| 2 | SRV05-4 | Package_TO_SOT_SMD:SOT-23-6 | U73, U74 |
| 2 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1, JP3 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP2, JP4 |
| 2 | ~ | Keyboard stabilizers:Stabilizer_Cherry_MX_2.00u | STAB14, STAB54 |
| 1 | NX3225SA-12.000000MHZ | SamacSys:NX3225SA12MHZSTDCSR3 | Y1 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U203 |
| 1 | BOOT | SamacSys:PTS636SP50SMTRLFS | SW1 |
| 1 | DEBUG | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | LSF0204QPWRQ1 | SamacSys:SOP65P640X120-14N | IC1 |
| 1 | M20-8900505 | Connector_Harwin:Harwin_M20-89005xx_1x05_P2.54mm_Horizontal | J7 |
| 1 | Multi_Hotswap_with_RGB | Keyboard footprints:Multi Hotswap with RGB 2U | U14 |
| 1 | Multi_Hotswap_with_RGB | Keyboard footprints:Multi Hotswap with RGB 2,75U | U54 |
| 1 | Multi_Hotswap_with_RGB | Keyboard footprints:Multi Hotswap with RGB 1,5U | U15 |
| 1 | Multi_Hotswap_with_RGB | Keyboard footprints:Multi Hotswap with RGB ISO Enter | U28 |
| 1 | Multi_Hotswap_with_RGB | Keyboard footprints:Multi Hotswap with RGB 1,75U | U29 |
| 1 | Multi_Hotswap_with_RGB | Keyboard footprints:Multi Hotswap with RGB 6,25U | U58 |
| 1 | PWR_3V3 | Diode_SMD:D_0603_1608Metric | DL2 |
| 1 | PWR_5V | Diode_SMD:D_0603_1608Metric | DL1 |
| 1 | RESET | SamacSys:PTS636SP50SMTRLFS | SW2 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U201 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U202 |
| 1 | ~ | Keyboard stabilizers:Stabilizer_Cherry_MX_6.25u | STAB58 |


Crem2y/pico-console-v2-pcb
pico console v2 board (firmware : https://github.com/Crem2y/pico-console-v2)

minipadKB/minipad
The PCB and case files for the minipad, an RP2040-based 2-3-key keypad for the rhythm game osu!.

ScatteredDrifter/Buran-Ortho
A 39-key orthogonal keyboard with support for two knobs, based on a rp2040




It measures 352 × 126 mm and has 4 copper layers, 1.61 mm thick.
342 parts, built around the RP2040, W25Q128JVSIQ, SRV05-4 and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SirBramble/The-Typeuwu repository on GitHub, at the commit this page was made from: the board is 01 PCB/01 The Typeuwu PCB/The Typeuwu.kicad_pcb and its schematic 01 PCB/01 The Typeuwu PCB/The Typeuwu.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).