
ESP32CanBoard
ieb/CanDiagnose
Small firmware to run on an ESP32 and diagnose devices and messages on a canbus.

STM32 Bluepill ComNode - industrial comms carrier with RS485, CAN bus and 0-10V analog interface. Hand-solderable THT, bare PCB. KiCad source files.
BluePillComNode is an open-source printed circuit board by SimulatedFlow, from the SimulatedFlow/kicad-board-2026-07-27-bluepillcomnode repository on GitHub. It is a 4-layer board of 100 × 80 mm with 26 parts on 19 nets, routed with 99 tracks and 18 vias.
It is built around the MAX3485ED, RS485 and LM7805, with the TJA1050, 100UF/35V and SS14 among its other parts. Its parts include 5 capacitors, 5 connectors, 4 resistors, 3 ICs and 2 diodes. It belongs with the interfaces and adapters and computers and single-board computers boards and the STM32 boards of this library.
This repository contains the full design files of a commercial hardware board. It is source-available, not open source: read it, evaluate it, then buy a license to use it. See LICENSE.md (source-available, purchase required).
Get it / Buy:
Schematics, BOMs and example-firmware docs for our STM32 carrier boards. Get it by joining the newsletter — plus a heads-up when something new ships. Double opt-in, unsubscribe in one click, no address sharing.
© 2026 Simulated Flow UG. All rights reserved.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_3.2mm | MountingHole:MountingHole_3.2mm | MH1, MH2, MH3, MH4 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C5 |
| 2 | 120R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 1 | 100uF/35V | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 10uF/16V | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 470R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R_LED1 |
| 1 | ANALOG_IN | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J5 |
| 1 | BluePill_L | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | A1 |
| 1 | BluePill_R | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | A2 |
| 1 | CAN | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-3-5.0-H_1x03_P5.00mm_Horizontal | J3 |
| 1 | I2C | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-4-5.0-H_1x04_P5.00mm_Horizontal | J4 |
| 1 | LM7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | MAX3485 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | PWR_IN | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J1 |
| 1 | RS485 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-3-5.0-H_1x03_P5.00mm_Horizontal | J2 |
| 1 | SS14 | Diode_SMD:D_SOD-123 | D1 |
| 1 | STATUS | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | LED1 |
| 1 | TJA1050 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |

ieb/CanDiagnose
Small firmware to run on an ESP32 and diagnose devices and messages on a canbus.

ieb/N2KNMEA0183Wifi
Exposes NMEA2000 and BMS data over BLE for Apps to use. Also supports Wifi/http/tcp/udp services.

anyshake/explorer
🌏 Detecting seismic wave using 3 geophones and 3-axis accelerometer, pack & send data to AnyShake Observer over RS232 / RS485 serial.

fraxinas/DoorBirdPico
A custom Raspberry Pi Pico PCB design and code to add functionality to the DoorBird Voip entryphone.

austinscreations/Oxrs-Black
a custom rack controller that is based of the rack32 but includes some upgrades and major changes

bclswl0827/openstation
An open source, cross-platform, easy-to-use satellite automatic tracking system with hardware & software solutions.

ieb/BatterySensor
A Modbus RTU Battery Current and Voltage sensor board based Attiny3224, MAX485, MAX9918 chips.

It measures 100 × 80 mm and has 4 copper layers, 1.6 mm thick.
26 parts, built around the MAX3485ED, RS485, LM7805 and TJA1050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SimulatedFlow/kicad-board-2026-07-27-bluepillcomnode repository on GitHub, at the commit this page was made from: the board is BluePillComNode.kicad_pcb and its schematic BluePillComNode.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask SimulatedFlow before reusing the design.