
PixelWave
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

I designed a miniature gaming Macropad featuring 8 mechanical push-button switches, a rotary encoder, and an RGB LED for indication.
MacroPad PCB is an open-source printed circuit board by Sighcyy, from the Sighcyy/Macropad repository on GitHub, published under the MIT licence. It is a 2-layer board of 78.1 × 85.5 mm with 11 parts on 15 nets, routed with 122 tracks and 0 vias.
It is built around the SK6812. Its parts include 9 switches, 1 IC and 1 diode. It belongs with the keyboards and input boards and the RP2040 boards of this library.
(Keyboard Are Too Big)
I designed a miniature gaming Macropad featuring 8 mechanical push-button switches, a rotary encoder, and an RGB LED for indication. It features an EC11 rotary encoder, 1 addressable RGB LED, and the Seeed XIAO RP2040 microcontroller, which was chosen for its small form factor and support for KMK firmware. The parts are populated on a custom PCB for tidy arrangement and good performance. The case is fully 3D printable, making the design easy to reproduce and customize. This Macropad provides a programmable, mini interface to enhance game control and responsiveness.
Over the LED Light Hole, a thin layer of hard plastic will be added to allow light to pass through without the user being able to touch the inside.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW5, SW6, SW7, SW8, SW9 |
| 1 | RotaryEncoder_Switch | Rotary Encoders:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW4 |
| 1 | SK6812 | LED_SMD:LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D1 |
| 1 | XIAO-RP2040-DIP | OPL:XIAO-RP2040-DIP | U1 |

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

conol-ai/openmicrokbd
Open-source recreation of OpenAI's Codex Micro macropad — PCB written in CoHDL, an AI-native hardware description language. Rust firmware (embassy) + companion app (makepad). MIT licensed. https://openmicrokbd.org



cormoran/dya-dash-keyboard
DYA Dash portable wireless split keyboard with 25mm trackball

w4ilun/neofighter
A MIDI controller using arcade buttons with RGB lighting effects

miliar/saiboard
An open-source, wooden electronic Go board that integrates with KataGo.

256foundation/emberone00-pcb
KiCAD design files for the emberOne/00 hashboard
It measures 78.1 × 85.5 mm and has 2 copper layers, 1.6 mm thick.
11 parts, built around the SK6812. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Sighcyy/Macropad repository on GitHub, at the commit this page was made from: the board is PCB/MacroPad_PCB.kicad_pcb and its schematic PCB/MacroPad_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).