

SidSky
Custom PCB for gifting
- Size
- 76.2 × 25.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 27
- Pads
- 101
- Tracks, vias
- 207, 17
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 13 Mar 2026
- Updated
- 26 Mar 2026
Overview
SidSky is an open-source printed circuit board by Shruti-Tajne, from the Shruti-Tajne/CustomPCBs repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 76.2 × 25.4 mm with 42 parts on 27 nets, routed with 207 tracks and 17 vias.
It is built around the PTS08056V050, SZSMF5.0AT1G and USB4105-GF-A. Its parts include 18 resistors, 17 diodes, 2 capacitors, 1 connector and 1 fuse.
Main components
3PTS08056V050
0805-40℃~+85℃ 1.25mm 100A 150mΩ 1A 200ms 500mA 500mW 6V 850mΩ 0805 Resettable Fuses ROHSEatonResettable FusesSZSMF5.0AT1G
SOD-123FL-55℃~+150℃ 200W 21.7A 400uA 5V 6.4V 9.2V IEC 61000-4-2、IEC 61000-4-4 TVS Unidirectional SOD-123FL ESD and Surge Protection (TVS/ESD) ROHSLittelfuseESD And Surge Protection (TVS/ESD)USB4105-GF-A
SMD-40℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
README.mdPCB
A simple LED ciruit with USB-C as power. Custom PCB for gifting

Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17, R18 |
| 16 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17 |
| 2 | 5.1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.0mm | GND1 |
| 1 | GOOD VIBES | TestPoint:TestPoint_Pad_D1.0mm | +5V1 |
| 1 | LOVE | TestPoint:TestPoint_Pad_D1.0mm | +5V_fuse1 |
| 1 | PTS08056V050 | Fuse:Fuse_0805_2012Metric | F1 |
| 1 | SZSMF5.0AT1G | Diode_SMD:D_SOD-123F | D1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
More from Shruti-Tajne/CustomPCBs
1- 2 layers76.2 × 25.4 mm

Similar boards
- 2 layers99 × 58.5 mm

- 4 layers16.9 × 119.4 mm

- 2 layers21 × 31.5 mm

- 2 layers60 × 111.3 mm

Silkscreen pcb
iandchasse/silkscreen-pcb
Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.
189 parts589CERN-OHL-S-2.0 - 4 layers99.6 × 76.2 mm

- 2 layers45 × 45 mm

AirCube
StuckAtPrototype/AirCube
Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.
61 parts379Apache-2.0 - 4 layers22.9 × 61 mm

- 4 layers55 × 14.7 mm

Questions
How big is the SidSky PCB?
It measures 76.2 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SidSky use?
42 parts, built around the PTS08056V050, SZSMF5.0AT1G and USB4105-GF-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SidSky KiCad files?
From the Shruti-Tajne/CustomPCBs repository on GitHub, at the commit this page was made from: the board is SidSky/project/SidSky.kicad_pcb and its schematic Paul/project/Paul.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SidSky design in my own project?
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).