Skip to the content
2 layersRelay, the printed circuit board in 3D
Copper layers
2
Thickness
1.6 mm
Parts
65
Nets
67
Pads
209
Tracks, vias
484, 0
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
24 Jun 2025
Updated
24 Jun 2025

Overview

Relay is an open-source printed circuit board by Shreyas-k-p, from the Shreyas-k-p/SMPS repository on GitHub. It is a 2-layer board with 65 parts on 67 nets, routed with 484 tracks and 0 vias.

Its parts include 16 resistors, 16 diodes, 9 connectors, 8 ICs and 8 transistors. It belongs with the home automation and IoT boards of this library.

Parts

65
QtyValueFootprintReferences
161N4001Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16
16RResistor_THT:R_Axial_DIN0617_L17.0mm_D6.0mm_P30.48mm_HorizontalR1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16
8Conn_01x02Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_VerticalJ1, J2, J4, J5, J6, J7, J8, J9
8DIPxx-1Axx-11xRelay_THT:Relay_StandexMeder_DIP_LowProfileK1, K2, K3, K4, K5, K6, K7, K8
8ITR1201SR10AROptoDevice:Everlight_ITR1201SR10ARU1, U2, U3, U4, U5, U6, U7, U8
8NPNPackage_TO_SOT_THT:TO-92Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8
1Conn_01x09Connector_PinHeader_1.00mm:PinHeader_1x09_P1.00mm_VerticalJ3

More from Shreyas-k-p/SMPS

1
  • 2 layers247.5 × 105 mmSMPS, the printed circuit board in 3D

    SMPS

    Shreyas-k-p/SMPS

    33 parts

Similar boards

  • 2 layers42 × 67 mmLalboard, the printed circuit board in 3D

    Lalboard

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    65 parts993
  • 2 layers198.1 × 30.5 mmSplitflap driver, the printed circuit board in 3D

    Splitflap driver

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    65 parts744MIT
  • 2 layers74.8 × 32.5 mmMooltipass mini, the printed circuit board in 3D

    Mooltipass mini

    limpkin/mooltipass

    Github repository dedicated to the mooltipass project

    65 parts531
  • 2 layers60 × 100 mmV3 Connector Only, the printed circuit board in 3D

    V3 Connector Only

    PiTracLM/PiTrac

    Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)

    65 parts439GPL-2.0
  • 2 layers45 × 58.2 mmOpentama, the printed circuit board in 3D

    Opentama

    Sparkr-tech/opentama

    An open-source reference design for MCUGotchi

    65 parts237
  • 2 layers40 × 120 mmPhotodiode board v3, the printed circuit board in 3D

    Photodiode board v3

    0x23/nmWave-Interferometer

    An Open Source Interferometer for Accurate Distance Measurements

    65 parts151MIT
  • 2 layers78 × 130 mmLofence, the printed circuit board in 3D

    Lofence

    kiu/lofence

    LoFence is a LoRaWAN capable IoT electric fence monitoring system running on the The Things Network.

    65 parts142MIT

Questions

What parts does the Relay use?

65 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Relay KiCad files?

From the Shreyas-k-p/SMPS repository on GitHub, at the commit this page was made from: the board is SMPS/relay/relay.kicad_pcb and its schematic SMPS/SMPS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Relay design in my own project?

Its repository states no licence, so its author keeps all rights: ask Shreyas-k-p before reusing the design.