Power
SheffieldMLtracking/retrodetect_bee_track_hardware
The PCBs and 3d print models etc for the bee tracking system
The PCBs and 3d print models etc for the bee tracking system
Pi hat is an open-source printed circuit board by SheffieldMLtracking, from the SheffieldMLtracking/retrodetect_bee_track_hardware repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 104.4 × 61 mm with 42 parts on 78 nets, routed with 418 tracks and 48 vias.
It is built around the MCP3008-I/P. Its parts include 14 resistors, 9 connectors, 8 transistors, 7 capacitors and 4 ICs.
The PCBs and 3d print models etc for the bee tracking system
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 560R | Resistor_SMD:R_0402_1005Metric | R9, R10, R11, R12, R13, R14, R15, R16 |
| 8 | BC549 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 8 | Screw_Terminal_01x04 | TerminalBlock_RND:TerminalBlock_RND_205-00278_1x04_P5.00mm_Vertical | J1, J2, J4, J5, J6, J7, J8, J9 |
| 5 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4, C6, C7 |
| 3 | 330K | Resistor_SMD:R_0402_1005Metric | R1, R3, R5 |
| 3 | 56K | Resistor_SMD:R_0402_1005Metric | R2, R4, R6 |
| 2 | 74LS08 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U1, U2 |
| 1 | 10uF | Capacitor_SMD:CP_Elec_4x5.4 | C5 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | Conn_02x20_Odd_Even | Flipped_IDC_20x2:Flipped_IDC | J3 |
| 1 | MCP1541-TO | Package_TO_SOT_SMD:SOT-23-3 | U4 |
| 1 | MCP3008 | MCP3008_Project:SOIC127P600X175-16N | U3 |
SheffieldMLtracking/retrodetect_bee_track_hardware
The PCBs and 3d print models etc for the bee tracking system


cyberboy666/recurBOY
a rpi0 video-instrument – created in collaboration with Guergana Tzatchkova

nekonaute/pogobot
Pogobot is an open-source open-hardware robotic platform for swarm robotics

cyberboy666/i_n_c_u_r
a r_e_c_u_r video sampler extension circuit - adding knobs, cv and serial midi control


IceyPlazza/EWB-EPA-Rainworks
26-27 EWB EPA Rainworks project; We're putting a sensor box in the ground!

butterstick-fpga/programming-jig
A FT232H based production programming jig for the ButterStick

challengerjdb/RaspberryPiHat-datalogger
My name is Jacob Bendell, and I’m a student at the University of Pennsylvania studying Electrical Engineering. I took this past year off from school to avoid online classes and intern at Amped Innovation, a start-up in…
It measures 104.4 × 61 mm and has 2 copper layers, 1.6 mm thick.
42 parts, built around the MCP3008-I/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SheffieldMLtracking/retrodetect_bee_track_hardware repository on GitHub, at the commit this page was made from: the board is PCB/pi_hat/pcb.kicad_pcb and its schematic PCB/pi_hat/pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).