
Power supply 17VDC low noise
AndmDam/kiCad_repo
Repositorio de mis archivos de mis proyectos de kicad.

Fox and other nuisance animal detection and frightening device. Uses cameras and AI to detect and identify only the nuisance animals.
OutFox is an open-source printed circuit board by ShaunPrice, from the ShaunPrice/OutFox repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 96.5 × 96.5 mm with 92 parts on 74 nets, routed with 593 tracks and 19 vias.
It is built around the ATTINY85V-10SU, DS3231MZ/V+ and LM317, with the LM7812 and TIP122 among its other parts. Its parts include 32 diodes, 26 resistors, 8 capacitors, 7 ICs and 7 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
This is a volunteer project to help save the endangered Bell turtle species. I'm assisting the "Turtles Forever" project team in developing a fox (and dogs) detection and scaring system that uses Artificial Intelligence (AI) to identify the preditors and ward them off. The main preditor causing the damage has been foxes that are not native to Australia and are destroying the turtle nests.
This is the working prototype (PCB not validated) for the solution. It uses MobileNet AI model as it already detects many species of foxes, dogs and wolves.
Any assistance in this project is welcome!!!
https://www.abc.net.au/news/2018-03-07/turtle-hatchlings-offer-hope-endangered-bells-turtle/9522182 https://northerntablelands.lls.nsw.gov.au/resource-hub/media-releases/2016/work-begins-on-bells-turtle-recovery-project
Fox and other nuisance animal detection and frightening device. Uses cameras and AI to detect and identify only the nuisance animals.

This is a Work in Progress
The core of the system is the Sipeed BiT board with camera available from Seeed. https://www.seeedstudio.com/Sipeed-MAix-BiT-for-RISC-V-AI-IoT-p-2872.html
This board uses a Kendryte K210 Neural Accellerator for at the edge AI. The board consumes less than 1 Watt of power.
If using this board and camera for night vision using the IR LEDs you'll need to unscrew the lense from the camera and remove the small square IR filter from the back of the lense.
The documentation for this processor is available here: https://maixpy.sipeed.com/en/
http://dl.sipeed.com/MAIX/ https://github.com/sipeed
Use uPyLoader for uploading files and executing script Use kloader_windows for uploading firmware
The details of obtaining and using these tools is available from the Sipeed website:
https://maixpy.sipeed.com/en/get_started/upload_script.html
Builds: http://dl.sipeed.com/MAIX/MaixPy/release/master/ GitHub: https://github.com/sipeed/MaixPy/releases
The following article explains how to train, convert and run AI modules on the MAix BiT and other modules using the Kendryte K210 processor. https://bbs.sipeed.com/t/topic/682
http://blog.sipeed.com/p/390.html Note 1: SD library does not support long file names. Note 2: name.kmodel files are in the zipped file name.kfpkg
kfpkg files are zipped files containing the following files:
model.kmodel file that is the inference model
flash-list.json file that tells the loaded where to put the model in flash memoryA typical kfpkg flash-list.json file is below where facedetect.kmodel is the name of the kmodel file: '''json { "version": "0.1.0", "files": [ { "address": 0x00300000, "bin": "facedetect.kmodel", "sha256Prefix": false } ] } '''
| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | IR LED | LEDs:LED_D5.0mm | D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25 +8 |
| 6 | 1k | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R5, R8, R15, R18, R19 |
| 5 | 10k | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3, R6, R20, R22 |
| 4 | 47 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R21, R23, R24, R25 |
| 4 | MountingHole | Mounting_Holes:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 100nF low leakage | Capacitors_SMD:C_0603_HandSoldering | C3, C5, C8 |
| 3 | 2k | Resistors_SMD:R_0603_HandSoldering | R13, R16, R17 |
| 3 | IRLML2060 | TO_SOT_Packages_SMD:SOT-23 | Q1, Q3, Q4 |
| 2 | 0.1uF | Capacitors_THT:CP_Radial_D4.0mm_P1.50mm | C1, C6 |
| 2 | 100k | Resistors_SMD:R_0603_HandSoldering | R9, R10 |
| 2 | 1N4001 | Diodes_THT:D_DO-15_P12.70mm_Horizontal | D3, D4 |
| 2 | 1N4148 | Diodes_THT:D_A-405_P7.62mm_Horizontal | D1, D2 |
| 2 | 220uF | Capacitors_THT:CP_Radial_D5.0mm_P2.50mm | C2, C7 |
| 1 | 1000uF | Capacitors_THT:CP_Radial_D5.0mm_P2.50mm | C4 |
| 1 | 12V | Diodes_THT:D_DO-15_P12.70mm_Horizontal | D5 |
| 1 | 15V | Diodes_THT:D_DO-15_P12.70mm_Horizontal | D6 |
| 1 | 200k | Resistors_SMD:R_0603_HandSoldering | R12 |
| 1 | 220 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | 3W LED (1 to 3 in series) | LEDs:LED_D5.0mm | D30-D1 |
| 1 | 5.2R or 15R | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R26 |
| 1 | 5V Int Power | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | JP3 |
| 1 | 5k | Potentiometers:Potentiometer_Trimmer_Bourns_3266Y | R4 |
| 1 | 8.2k | Resistors_SMD:R_0603_HandSoldering | R14 |
| 1 | ATTINY85 Prog | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | J7 |
| 1 | ATtiny85V-10SU | SMD_Packages:SOIC-8-N | U7 |
| 1 | Battery | Connectors_Terminal_Blocks:TerminalBlock_bornier-2_P5.08mm | J6 |
| 1 | DS3231MZ | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U5 |
| 1 | IR Motion Sensor | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J2 |
| 1 | L78L05_TO92 | TO_SOT_Packages_THT:TO-92_Inline_Narrow_Oval | U1 |
| 1 | LDR07 | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R11 |
| 1 | LED | LEDs:LED_D3.0mm | D7 |
| 1 | LM317 | Power_Integrations:TO-220 | U3 |
| 1 | LM7812 | TO_SOT_Packages_THT:TO-220-3_Vertical | U6 |
| 1 | MAIX_Bit | Other:MAIXBit | U4 |
| 1 | Maix GPIO | Socket_Strips:Socket_Strip_Straight_1x12_Pitch2.54mm | J4 |
| 1 | PWR ON | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | JP1 |
| 1 | Pololu_5V_Regulator_D24V6F5 | Pololu:Polulu_Voltage_Regulator | U2 |
| 1 | RTC Batt | Connectors_JST:JST_PH_B2B-PH-K_02x2.00mm_Straight | J5 |
| 1 | RTC PROG | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | JP2 |
| 1 | RXEF090 PTC | Fuse_Holders_and_Fuses:Fuse_TE5_Littlefuse-395Series | F1 |
| 1 | Siren | Connectors_Terminal_Blocks:TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | Solar | Connectors_Terminal_Blocks:TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | TIP122 | TO_SOT_Packages_THT:TO-220-3_Vertical | Q2 |

AndmDam/kiCad_repo
Repositorio de mis archivos de mis proyectos de kicad.

IvDm/Z-probe-on-smd-resistors-2512
Auto bed level strain gage for 3D printer using resistors 2512 instead of strain gauges.

MouseBiteLabs/Super-Game-Boy-Plus
A replacement circuit board for improving the Super Game Boy, or for creating a standalone Game Boy game for the SNES.

joelsernamoreno/Attiny85-Standalone
PCB designs based on the Attiny85 microcontroller for standalone development.

hzeller/digi-spherometer
A digital spherometer, reading data from digital dial indicator and converting it to radius, displaying on OLED display.


perja12/sonos_magic_hub
Circuit for using the LG OLED C9 TV remote (LG Magic Remote) with the Sonos Playbar.

mjrskiles/gatekeeper
A digital gate/trigger processor for Eurorack modular synthesizers. Gatekeeper has a two-state (0 or 5V) output driven by push button and CV input. The input response is configurable via menu settings.
It measures 96.5 × 96.5 mm and has 2 copper layers, 1.6 mm thick.
92 parts, built around the ATTINY85V-10SU, DS3231MZ/V+, LM317 and LM7812. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ShaunPrice/OutFox repository on GitHub, at the commit this page was made from: the board is OutFox_KiCAD_Electronics/OutFox.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).