Skip to the content
2 layers35.3 × 32.6 mmBlueRetro Universal HW1, the printed circuit board in 3D

A universal PCB for use with the BlueRetro project for basic internal console installations.

Size
35.3 × 32.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
36
Pads
127
Tracks, vias
157, 5
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
25 May 2023
Updated
7 Jun 2023

Overview

BlueRetro Universal HW1 is an open-source printed circuit board by Sharkeology, from the Sharkeology/BlueRetro_Universal_HW1 repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 35.3 × 32.6 mm with 9 parts on 36 nets, routed with 157 tracks and 5 vias.

It is built around the ESP32-WROOM-32, TXS0108EPWR and AMS1117-3.3. Its parts include 4 ICs, 2 capacitors, 1 resistor and 1 connector. It belongs with the ESP32 boards of this library.

Main components

3

README

README.md

BlueRetro Universal HW1

A basic board meant to be used with the BlueRetro project to simplify basic “HW1” internal installation in various supported consoles. Including onboard level shifting 3.3v regulation for consoles which don’t provide it.

Bill of Materials

TXS0108EPWR Footprint and symbol courtesy of SnapEDA, BlueRetro logo created by HumbleBazooka.

Parts

9
QtyValueFootprintReferences
21uFCapacitor_SMD:C_0805_2012MetricC1, C2
2TXS0108EPWRPackage_SO:TSSOP-20_4.4x6.5mm_P0.65mmU3, U4
11kResistor_SMD:R_0805_2012MetricR1
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U1
1Conn_01x17Connector_PinSocket_2.00mm:PinSocket_1x17_P2.00mm_VerticalJ1
1ESP32-WROOM-32RF_Module:ESP32-WROOM-32U2
1LOGObr:logoG***

More from Sharkeology/BlueRetro_Universal_HW1

1
  • 2 layers35.2 × 24 mmBlueRetro Universal HW1 3v3, the printed circuit board in 3D

    BlueRetro Universal HW1 3v3

    Sharkeology/BlueRetro_Universal_HW1

    A universal PCB for use with the BlueRetro project for basic internal console installations.

    7 parts1Apache-2.0

Similar boards

  • 2 layers27.5 × 48.3 mmICE40DevBoard, the printed circuit board in 3D

    ICE40DevBoard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    41 parts915
  • 2 layers73.7 × 38.1 mmMSPBMP, the printed circuit board in 3D

    MSPBMP

    grumat/glossy-msp430

    Glossy MSP430 - Embedded GDB Debugger for MSP430

    66 parts15GPL-2.0
  • 12 layers180 × 150 mmMarble, the printed circuit board in 3D

    Marble

    BerkeleyLab/Marble

    Dual FMC FPGA carrier board developed for general purpose use in particle accelerator electronics instrumentation.

    1,006 parts35
  • 4 layers70 × 53.3 mmCamboard uno q, the printed circuit board in 3D

    Camboard uno q

    RevLmt/camboard-uno-q

    shield for uno q

    15 parts7CERN-OHL-P-2.0
  • 4 layers85 × 56 mmV link hat, the printed circuit board in 3D

    V link hat

    BoostedMoose/v-link-hat

    Official repository of the V-Link HAT

    96 parts6
  • 6 layers100 × 100 mmImx8x eps leviathan v2, the printed circuit board in 3D

    Imx8x eps leviathan v2

    BroncoSpace-Lab/scales-hardware

    Hardware design files for the Spacecraft Compartmentalized Autonomous Learning and Edge Computing System (SCALES)

    449 parts6
  • 2 layers100 × 100 mmArrow deca retro cape, the printed circuit board in 3D

    Arrow deca retro cape

    somhi/DECA_retro_cape_2

    Retro cape (addon) for DECA FPGA

    79 parts5
  • 4 layers86 × 69 mmZYNQ7000 MINIMB, the printed circuit board in 3D

    ZYNQ7000 MINIMB

    dj140/ZYNQ7020_Development_Board

    156 parts2

Questions

How big is the BlueRetro Universal HW1 PCB?

It measures 35.3 × 32.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the BlueRetro Universal HW1 use?

9 parts, built around the ESP32-WROOM-32, TXS0108EPWR and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BlueRetro Universal HW1 KiCad files?

From the Sharkeology/BlueRetro_Universal_HW1 repository on GitHub, at the commit this page was made from: the board is BlueRetro_Universal_HW1.kicad_pcb and its schematic BlueRetro_Universal_HW1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the BlueRetro Universal HW1 design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).