Skip to the content
2 layers20.1 × 37.7 mmMyDevboard, the printed circuit board in 3D

MyDevboard

Selmakrgzz/AVR

Embedded programming in C/C++

Size
20.1 × 37.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
28
Pads
66
Tracks, vias
122, 9
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
2 Nov 2024
Updated
2 Feb 2025

Overview

MyDevboard is an open-source printed circuit board by Selmakrgzz, from the Selmakrgzz/AVR repository on GitHub. It is a 2-layer board of 20.1 × 37.7 mm with 15 parts on 28 nets, routed with 122 tracks and 9 vias.

It is built around the ATTINY404-SSN and MIC5504-3.3YM5. Its parts include 4 connectors, 3 capacitors, 2 resistors, 2 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

Parts

15
QtyValueFootprintReferences
21uCapacitor_SMD:C_0603_1608MetricC3, C4
2Conn_01x07_PinConnector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ3, J4
2LEDLED_SMD:LED_0603_1608MetricD1, D2
1100nFCapacitor_SMD:C_0603_1608MetricC1
12KResistor_SMD:R_0603_1608MetricR2
14kResistor_SMD:R_0603_1608MetricR1
1ATtiny404-SSPackage_SO:SOIC-14_3.9x8.7mm_P1.27mmU2
1AVR-UPDI-6Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ2
1LOGOLOGOG***
1MIC5504-3.3YM5Package_TO_SOT_SMD:SOT-23-5U1
1SW_Omron_B3FSButton_Switch_THT:SW_TH_Tactile_Omron_B3F-10xxSW1
1USB_B_MicroConnector_USB:USB_Micro-B_Amphenol_10104110_HorizontalJ1

Similar boards

  • 2 layers61.7 × 36.8 mmGenesis 6button, the printed circuit board in 3D

    Genesis 6button

    rfmerrill/genesis_6button

    Simple PCB + ATTiny404 code for a 6-button mega drive controller.

    27 parts5MIT
  • 2 layers57.1 × 24.4 mmPcb cia, the printed circuit board in 3D

    Pcb cia

    codepainters/amiga_yafs

    Yet Another (Amiga) FDD Swapper

    14 parts3
  • 2 layers70 × 65.5 mmOrnament2023, the printed circuit board in 3D

    Ornament2023

    Chris-Johnston/ornament2023

    ATTiny404 xmas tree ornament for 2023

    28 parts
  • 2 layers67.8 × 83.8 mmSanta caws, the printed circuit board in 3D

    Santa caws

    Chris-Johnston/santacaws

    More novelty circuitboards, powered by an ATTINY404.

    19 parts
  • 2 layers90 × 40 mmPSUPack, the printed circuit board in 3D

    PSUPack

    cnf/PSUPack

    PSU BackPack / breakout

    25 partsCC-BY-SA-4.0
  • 2 layers62 × 83 mmVehicle Power Switch, the printed circuit board in 3D

    Vehicle Power Switch

    custom-ds/Vehicle-Auto-On

    With the Arduion programmer board loaded with the jtag2updi software, and the Pin 6 from the Arduino connected to the Reset line on the ATTiny404, you can Build and Program directly inside of the Visual Studio Code.

    49 partsGPL-3.0
  • 2 layers50.8 × 44 mmRf room sensor, the printed circuit board in 3D

    Rf room sensor

    dselcan/rf-room-sensor-hw

    PCB design files and BOM for the RF Room Sensor device

    32 partsBSD-3-Clause

Questions

How big is the MyDevboard PCB?

It measures 20.1 × 37.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the MyDevboard use?

15 parts, built around the ATTINY404-SSN and MIC5504-3.3YM5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MyDevboard KiCad files?

From the Selmakrgzz/AVR repository on GitHub, at the commit this page was made from: the board is Devboard/Devboard-Design/myDevboard/myDevboard.kicad_pcb and its schematic Devboard/Devboard-Design/myDevboard/myDevboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the MyDevboard design in my own project?

Its repository states no licence, so its author keeps all rights: ask Selmakrgzz before reusing the design.