

Rail transceiver
Open source motor controller and signal decoder for model railways.
- Size
- 45 × 23 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 45
- Pads
- 168
- Tracks, vias
- 190, 16
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 8 Dec 2023
- Updated
- 25 Apr 2024
Overview
Rail transceiver is an open-source printed circuit board by SebastianOberschwendtner, from the SebastianOberschwendtner/OTP24_oTrainControl repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 45 × 23 mm with 58 parts on 45 nets, routed with 190 tracks and 16 vias.
It is built around the AD8656AR and TS3011ILT. Its parts include 19 resistors, 16 capacitors, 9 diodes, 4 ICs and 1 connector. It belongs with the robots and motor control and radio and wireless boards and the STM32 boards of this library.
Main components
2README
README.mdOTP-24 oTrainControl
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | STPS 2L40U | Diode_SMD:D_SMB | D1, D2, D3, D4, D5, D6, D7, D8 |
| 6 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4, C8, C12, C14, C15 |
| 5 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R14, R16, R17 |
| 5 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R8, R12, R13 |
| 4 | Conn_01x01_Pin | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | -1, -2, +1, +2 |
| 3 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15, R18, R19 |
| 3 | 24p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C7, C10 |
| 3 | 3.3k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10, R11 |
| 2 | 1n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C11 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16 |
| 1 | 10p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 15.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 2.2u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13 |
| 1 | 220u | Capacitor_SMD:CP_Elec_6.3x7.7 | C2 |
| 1 | 33u | Inductor_SMD_Custom:L_Bourns_SRN5040 | L1 |
| 1 | 3k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 47p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | AD8656 | Package_SO:MSOP-8_3x3mm_P0.65mm | U4 |
| 1 | BLUE | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D9 |
| 1 | Conn_01x06_Socket | Connector_Molex:Molex_SPOX_5268-06A_1x06_P2.50mm_Horizontal | J5 |
| 1 | LF33_TO252 | Package_TO_SOT_SMD:TO-252-2 | U3 |
| 1 | STM32L071K8Ux | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U1 |
| 1 | SW_Push | Button_Switch_SMD_Extended:SW_SPST_Wuerth_WS-TASU_SMT | SW1 |
| 1 | TS3011 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U2 |
The 57 most common of 58 parts.
Similar boards
- 4 layers170 × 100 mm

- 6 layers76 × 101 mm

- 6 layers76 × 101 mm

- 2 layers53.3 × 40.6 mm

- 4 layers91 × 22 mm

- 2 layers36.5 × 17.5 mm

- 2 layers60.1 × 40 mm

Microphone
AhmedYehia-M23/low-noise-microphone-preamplifier
Low-noise 5 V electret microphone preamplifier with adjustable 30–40 dB gain, AD8656 analog front end, KiCad PCB design, and LTspice validation.
27 parts - 4 layers38 × 53 mm

0374 Production Board
AllenNeuralDynamics/harp.device.PhotodiodeBoard
0374: Harp photodiode board with automated comparator calibration and gamma calibration developed by SIPE.
67 parts
Questions
How big is the Rail transceiver PCB?
It measures 45 × 23 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rail transceiver use?
58 parts, built around the AD8656AR and TS3011ILT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rail transceiver KiCad files?
From the SebastianOberschwendtner/OTP24_oTrainControl repository on GitHub, at the commit this page was made from: the board is schematic/rail_transceiver/rail_transceiver.kicad_pcb and its schematic schematic/rail_transceiver/front_end.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rail transceiver design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).