Skip to the content
12345678

AD8656AR

Analog Devices

Low Noise, Precision CMOS Amplifier

Part id
adi/AD8656AR
Category
Uncategorised
Package
SOIC8
Pins
8
Used on
13 open-source boards

Overview

The AD8656AR is an uncategorised made by Analog Devices in a SOIC8 package with 8 pins. Low Noise, Precision CMOS Amplifier.

PCBKit's library has its KiCad symbol (Amplifier_Operational:AD8656, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 13 open-source boards in 10 repositories on GitHub use it.

Symbol

12-3+
Amplifier_Operational:AD8656From KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the AD8656AR
PinNameType
1—Output
2-Input
3+Input
4V-Power in
5+Input
6-Input
7—Output
8V+Power in

Open-source boards using it

13See all 13
  • 2 layers53.3 × 40.6 mmUsb audio, the printed circuit board in 3D

    Usb audio

    skiselev/usb_audio

    Compact USB Audio Adapter

    78 parts14GPL-3.0
  • 4 layers91 × 22 mmLC PAMV4b, the printed circuit board in 3D

    LC PAMV4b

    WMXZ-EU/LC-MARE

    low-cost marine acoustic recorder

    74 parts8MIT
  • 2 layers36.5 × 17.5 mmAd8656, the printed circuit board in 3D

    Ad8656

    SL-RU/cs4398-stm32

    Test project and test boards for using cs4398 codec with stm32

    20 parts5
  • 2 layers60.1 × 40 mmMicrophone, the printed circuit board in 3D

    Microphone

    AhmedYehia-M23/low-noise-microphone-preamplifier

    Low-noise 5 V electret microphone preamplifier with adjustable 30–40 dB gain, AD8656 analog front end, KiCad PCB design, and LTspice validation.

    27 parts
  • 4 layers38 × 53 mm0374 Production Board, the printed circuit board in 3D

    0374 Production Board

    AllenNeuralDynamics/harp.device.PhotodiodeBoard

    0374: Harp photodiode board with automated comparator calibration and gamma calibration developed by SIPE.

    67 parts
  • 6 layers160 × 100 mmETH1CLCR2, the printed circuit board in 3D

    ETH1CLCR2

    BehrensG/ETH1CLCR2

    ETH1CLCR2 LCR measurement card with Ethernet interface.

    604 parts
  • 2 layers99.5 × 99.5 mmReparaturhelfer, the printed circuit board in 3D

    Reparaturhelfer

    martin-wagner/repair-helper

    repair helper pcbs for tube radios

    167 partsCERN-OHL-W-2.0
  • 4 layers217 × 152 mmWirebonder, the printed circuit board in 3D

    Wirebonder

    onurefe/Wirebonder

    Wirebonder hardware for buspin

    356 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the AD8656AR?

Yes. The symbol is Amplifier_Operational:AD8656 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the AD8656AR?

SOIC8, with 8 pins. Its footprint is drawn on this page.

What can replace the AD8656AR?

Parts like it in the library: the LTA8062XS8/R8 by Linearin, the SD8568 by WAVE, the FH9926 by XIN FEI HONG and the LTC8836XS8/R8 by Linearin. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the AD8656AR?

13 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.