Skip to the content
2 layers46 × 72 mmSebot, the printed circuit board in 3D

SeBot ROS2-ohjattu mobiilirobotti

Size
46 × 72 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
43
Pads
104
Tracks, vias
140, 132
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
5 Jun 2025
Updated
24 Sep 2026

Overview

Sebot is an open-source printed circuit board by SeAMKedu, from the SeAMKedu/sebot repository on GitHub, published under the MIT licence. It is a 2-layer board of 46 × 72 mm with 26 parts on 43 nets, routed with 140 tracks and 132 vias.

It is built around the L293D. Its parts include 8 resistors, 6 connectors, 5 capacitors, 2 diodes and 1 IC.

Main components

1

README

README.md

SeBot

DOI

SeBot-robotin ROS2 ohjelmointiohjeet 28.5.2025 OpenUGV-hankkeen ROS2 mobiilirobotti-työpajaan.

Varsinaiset ohjeet on kirjoitettu markdown-tiedostoihin. Niiden mukaiset valmiit koodit (ROS2, Arduino ja WWW) löydät repositorion code-kansiosta.

SeBotia varten on olemassa Rasberry Pi 5:lle sopiva image-tiedosto, jonka voi kirjoittaa MicroSD-muistikortille. Image sisältää valmiin ROS2 ympäristön ja muut tämän harjoituksen kannalta tarpeelliset muut tiedostot ja ohjelmat. Tiedosto on talletettu OpenUGV-hankkeen Teams-ryhmään (vaatii käyttöoikeuden SeAMK:lta). Mikäli sinulla ei ole käytössä tätä image-tiedostoa tai haluat tehdä harjoituksen jollain muulla koneella, voit hyvin asentaa ROS2-ympäristön itse apt install-komennolla Ubuntun pakettijakelun kautta. Ohje tähän löytyy Materiaali 0:sta.

Jos haluat tulostaa oman SeBot-pohjan, STP-malli ja PDF-mittakuva löytyy SeBot-kansiosta. Huomaa kuitenkin, että tämän harjoituksen kannalta pohjalevyn muoto on hyvin vapaa ja robotin voi rakentaa vaikkapa riittävän tukevaan muovirasiaan.

Parts

26
QtyValueFootprintReferences
410kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R6, R7, R8
4MountingHoleMountingHole:MountingHole_3mmH1, H2, H3, H4
34k7Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2, R3, R5
2100nCapacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mmC2, C3
2Conn_01x17_SocketConnector_PinSocket_2.54mm:PinSocket_1x17_P2.54mm_VerticalJ4, J5
2Screw_Terminal_01x06SeBot:TerminalBlock_Phoenix_MKDSN-1,5-6-5.08_1x06_P5.08mm_HorizontalJ1, J2
1100uCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC4
110uCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC5
11k2Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4
133nCapacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mmC1
1Conn_02x03_Counter_ClockwiseConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ6
1GREENLED_THT:LED_D5.0mmD1
1L293DPackage_DIP:DIP-16_W7.62mm_SocketU1
1Screw_Terminal_01x02SeBot:TerminalBlock_Phoenix_MKDSN-1,5-2-5.08_1x02_P5.08mm_HorizontalJ3
1YELLOWLED_THT:LED_D5.0mmD2

Similar boards

  • 2 layers178 × 145 mmUltra DB X51 v1, the printed circuit board in 3D

    Ultra DB X51 v1

    ExploreEmbedded/8051_DevelopmentBoard

    Design files and sample code for 8051 development Ultra Boards

    145 parts70
  • 2 layers84.3 × 58.4 mmEnocderDriver, the printed circuit board in 3D

    EnocderDriver

    NikodemBartnik/Small-Projects

    All of smaller projects (Arduino, PCBs, electronics, code)

    35 parts55
  • 2 layers56.4 × 72.6 mmRas pi hat, the printed circuit board in 3D

    Ras pi hat

    geno543/Redropi_highway

    the project aims to detect asteroids and meteor movement using high-quality cameras and radar detection methods using an AI model for accurate analysis, and it classifies bodies be in three categories: non-meteor…

    8 parts13
  • 2 layers87.5 × 70 mmLaberinto, the printed circuit board in 3D

    Laberinto

    CRM-UAM/CRMaze

    Open source robot for maze solving + line following

    34 parts12
  • 2 layers92.5 × 62.5 mmDropGenPCB, the printed circuit board in 3D

    DropGenPCB

    harrislab-brown/DropGen

    DropGen uses a fluid reservoir and a piezoelectric buzzer to precisely and repeatably dispense small droplets on demand.

    25 parts12CC-BY-SA-4.0
  • 2 layers47.5 × 49.5 mmElectronic, the printed circuit board in 3D

    Electronic

    zosko/magspoof

    Magspoof with Arduino Pro Micro

    5 parts11
  • 2 layers120.7 × 184.1 mmBeachRover circuit, the printed circuit board in 3D

    BeachRover circuit

    wizardofrobots/roverCode

    Jetson Nano powered Arduino Rover

    11 parts10
  • 2 layers90 × 53.4 mmOpenOx, the printed circuit board in 3D

    OpenOx

    hacklabkyiv/openox-pcb

    PCB design for OpenOx - open source oxygen concentrator

    43 parts7GPL-3.0

Questions

How big is the Sebot PCB?

It measures 46 × 72 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Sebot use?

26 parts, built around the L293D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Sebot KiCad files?

From the SeAMKedu/sebot repository on GitHub, at the commit this page was made from: the board is hardware/SeBot.kicad_pcb and its schematic hardware/SeBot.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Sebot design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).