

FridgeMonitor
- Size
- 78 × 62 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 277
- Nets
- 29
- Pads
- 364
- Tracks, vias
- 212, 10
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 24 May 2026
- Updated
- 29 May 2026
Overview
FridgeMonitor is an open-source printed circuit board by Schalleberg, from the Schalleberg/FridgeMonitor_PCB repository on GitHub. It is a 2-layer board of 78 × 62 mm with 277 parts on 29 nets, routed with 212 tracks and 10 vias.
It is built around the LM2594M-3.3, SI2301 and SS14. Its parts include 16 capacitors, 12 connectors, 6 resistors, 2 ICs and 1 diode. It belongs with the ESP8266 boards of this library.
Main components
3LM2594M-3.3
SOIC-8-40℃~+125℃@(TJ) 1 150kHz 3.3V 4.5V~40V 500mA Buck Buck Built-in Fixed SOIC-8 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersSI2301
SOT-23-3L-55℃~+150℃ 1 P-Channel 1.5V 120mΩ@4.5V 2.2A 200pF 20V 700mW 80pF P-Channel ±10V SOT-23 MOSFETs ROHSYONGYUTAIMOSFETsSS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
Parts
277| Qty | Value | Footprint | References |
|---|---|---|---|
| 230 | , , , , , , , , , , , , , , , +214 | ||
| 7 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C10, C14, C16 |
| 7 | C_Polarized | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C5, C6, C7, C8, C11, C13, C15 |
| 6 | Conn_01x03 | Connector_Phoenix_MC_HighVoltage:PhoenixContact_MC_1,5_3-G-5.08_1x03_P5.08mm_Horizontal | J1, J2, J3, J4, J5, J11 |
| 4 | 0R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R4, R5 |
| 4 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 3 | Conn_01x02_Pin | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J8, J9, J10 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 120uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C12 |
| 1 | 470R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 68uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C9 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J13 |
| 1 | Conn_02x04_Odd_Even | Connector_IDC:IDC-Header_2x04_P2.54mm_Vertical | J6 |
| 1 | ESP-01v090 | ESP8266:ESP-01 | U1 |
| 1 | L | Inductor_THT:L_Radial_D12.5mm_P7.00mm_Fastron_09HCP | L1 |
| 1 | LM2594M-3.3 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | SI2301 | Package_TO_SOT_SMD:TSOT-23 | Q1 |
| 1 | SS14 | Diode_SMD:D_SMA | D3 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J7 |
The 273 most common of 277 parts.
Similar boards
- 2 layers107.1 × 69 mm

- 2 layers

- 2 layers80 × 50 mm

ISPBoard
AndFroSwe/ISPBoard
This repo contains a project with a programming board for Atmel 28 DIP that can be programmed using a 6-pin JTAG port (ISP). It is designed specifically for use with ATmega 328P dip package.
25 parts - 2 layers

- 2 layers76.6 × 21.5 mm

Power Breakout
EmbeddedDesign/GotT-Translation-Circuit
A Bluetooth voice modulator for Dalek speech
18 parts2MIT - 2 layers

Fonte buck 3V3
karistonf/template_kicad
Some templates that are very useful for developing PCBs in KiCad
6 parts1 - 2 layers100 × 100 mm

- 2 layers70 × 40 mm

PIC12 UNIVERSAL Devboard v1 THT
alexanderjg85/simple_pic12_pdip8_universal_devboard
A simple development board with an LED and GPIOs on Pin headers. includes an ICSP Header and selectable dual power supply with a screw terminal
39 partsMIT
Questions
How big is the FridgeMonitor PCB?
It measures 78 × 62 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FridgeMonitor use?
277 parts, built around the LM2594M-3.3, SI2301 and SS14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FridgeMonitor KiCad files?
From the Schalleberg/FridgeMonitor_PCB repository on GitHub, at the commit this page was made from: the board is FridgeMonitor.kicad_pcb and its schematic FridgeMonitor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FridgeMonitor design in my own project?
Its repository states no licence, so its author keeps all rights: ask Schalleberg before reusing the design.