Skip to the content
2 layers32.9 × 29.1 mmServo Tester, the printed circuit board in 3D

The NE555 Timer IC is one of the most popular integrated circuits used for timing, pulse generation, and oscillation. In this project, it is configured in astable mode to generate a continuous PWM signal.

Size
32.9 × 29.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
9
Pads
28
Tracks, vias
62, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
26 Jun 2026
Updated
26 Jun 2026

Overview

Servo Tester is an open-source printed circuit board by Saroja-J, from the Saroja-J/Servo-Tester repository on GitHub. It is a 2-layer board of 32.9 × 29.1 mm with 11 parts on 9 nets, routed with 62 tracks and 0 vias.

It is built around the NE555P. Its parts include 3 resistors, 2 diodes, 2 connectors, 1 capacitor and 1 IC. It belongs with the robots and motor control boards of this library.

Main components

1

README

README.md

Servo Motor Controller using NE555 Timer

📖 Overview

The NE555 Timer IC is one of the most popular integrated circuits used for timing, pulse generation, and oscillation. In this project, it is configured in astable mode to generate a continuous PWM signal. The potentiometer changes the charging and discharging time of the timing capacitor, which varies the pulse width sent to the servo motor. Since servo motors determine their angular position based on PWM pulse width, adjusting the potentiometer changes the servo's position. The circuit also includes an LED power indicator and is designed using KiCad for schematic capture.


⚙️ How It Works

  1. A DC supply powers the circuit.
  2. The NE555 Timer IC generates a continuous PWM signal.
  3. The 100 kΩ potentiometer adjusts the pulse width by changing the timing network.
  4. The PWM signal is sent to the servo motor through the signal output pin.
  5. The servo rotates to the corresponding position based on the received pulse width.
  6. The LED indicates that the circuit is powered.

✨ Features

✔️ PWM-based servo motor control

✔️ Adjustable servo position using a potentiometer

✔️ Built around the reliable NE555 Timer IC

✔️ LED power indication

✔️ Simple, low-cost, and beginner-friendly design

✔️ Designed and simulated using KiCad


🛠️ Components

ComponentSpecificationPurpose
Timer ICNE555PGenerates the PWM signal required for servo control
Potentiometer (RV1)100 kΩAdjusts the pulse width to control the servo position
Resistor (R1)1 kΩLimits current through the LED
Resistor (R2)3.3 MΩForms part of the NE555 timing network
Resistor (R3)56 kΩSets the charging/discharging timing of the capacitor
Capacitor (C1)22 nFTiming capacitor used for PWM generation
Diode (D2)1N4148Provides separate charging and discharging paths for improved PWM control
LED (D1)Standard LEDIndicates power status
DC InputDC I/PSupplies power to the circuit

📷 Schematic

Image

⚠️ Note

  • Use a regulated power supply.
  • Ensure the servo motor and power supply share a common GND.
  • Verify that the power supply can provide sufficient current for the connected servo motor.

📄 License

This project is intended for educational and learning purposes.

text

Parts

11
QtyValueFootprintReferences
1100kPotentiometer_THT:Potentiometer_Alps_RK163_Single_HorizontalRV1
11N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD2
13M3Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2
156kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3
16V DCConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_HorizontalJ1
1C=22nfCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC1
1Conn_01x03_PinConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_HorizontalJ2
1LEDLED_THT:LED_D5.0mmD1
1NE555PPackage_DIP:DIP-8_W7.62mmU1
1R=1kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1

The 10 most common of 11 parts.

Similar boards

  • 2 layers327.9 × 139 mmCoco2, the printed circuit board in 3D

    Coco2

    baldengineer/bit-preserve

    Project for capturing vintage, classic, aka old computer schematics in KiCad.

    147 parts446
  • 2 layers370.8 × 298.5 mm8 Bit Computer, the printed circuit board in 3D

    8 Bit Computer

    The-Invent0r/8-bit-Computer-PCB

    These are the KiCAD files for my 8-Bit Computer.

    323 parts142
  • 2 layers200 × 96 mmTouchtone555, the printed circuit board in 3D

    Touchtone555

    DarcyJProjects/touchtone555

    An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus

    73 parts33
  • 4 layers340 × 210 mmYddraig, the printed circuit board in 3D

    Yddraig

    ddraig68k/hardware

    Schematic and CAD files for my 68K based computer

    224 parts29MIT
  • 2 layers152.9 × 74.9 mmClock, the printed circuit board in 3D

    Clock

    erikvanzijst/clock

    24H digital quartz clock from scratch

    82 parts21
  • 2 layers88.9 × 50.8 mmSynthCard, the printed circuit board in 3D

    SynthCard

    benjiaomodular/SynthCard

    I designed this project with the help of PCBWay. You can get a copy of these cards through the PCBWay Shared Projects page.

    16 parts19MIT
  • 4 layers194.5 × 188.6 mmMyCpu, the printed circuit board in 3D

    MyCpu

    fortinsylvain/MyCpu

    Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.

    162 parts18MIT
  • 2 layers145.3 × 129.9 mmC128Diag, the printed circuit board in 3D

    C128Diag

    hackup/C128Diag

    Replica of the Commodore C128 Diagnostic Test cartridge Assy No. 325093-01.

    61 parts16

Questions

How big is the Servo Tester PCB?

It measures 32.9 × 29.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Servo Tester use?

11 parts, built around the NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Servo Tester KiCad files?

From the Saroja-J/Servo-Tester repository on GitHub, at the commit this page was made from: the board is Servo-T/Servo Tester.kicad_pcb and its schematic Servo-T/Servo Tester.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Servo Tester design in my own project?

Its repository states no licence, so its author keeps all rights: ask Saroja-J before reusing the design.