Skip to the content
2 layers43.3 × 33.8 mmSMT32 based hardware design, the printed circuit board in 3D

SMT32 based hardware design

Saroja-J/STM32-BOARD

This project helped me gain practical experience in:

Size
43.3 × 33.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
33
Nets
46
Pads
158
Tracks, vias
187, 14
Pours
3
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
18 Jul 2026
Updated
2 Aug 2026

Overview

SMT32 based hardware design is an open-source printed circuit board by Saroja-J, from the Saroja-J/STM32-BOARD repository on GitHub. It is a 2-layer board of 43.3 × 33.8 mm with 33 parts on 46 nets, routed with 187 tracks and 14 vias.

It is built around the STM32F103C8T6. Its parts include 13 capacitors, 5 resistors, 4 connectors, 2 ICs and 1 diode. It belongs with the STM32 boards of this library.

Main components

1

README

README.md

🚀 STM32F103C8T6 Development Board

A compact and efficient STM32 development board designed from scratch in KiCad, following STMicroelectronics hardware design guidelines and datasheet recommendations.


✨ Features

  • 🔹 STM32F103C8T6 (ARM Cortex-M3) Microcontroller
  • 🔹 USB Micro Interface for Power & USB Communication
  • 🔹 3.3V LDO Power Supply (LD1117-3.3)
  • 🔹 SWD Programming & Debug Interface
  • 🔹 UART Communication Header
  • 🔹 I²C Expansion Header with Pull-up Resistors
  • 🔹 External 8 MHz Crystal Oscillator
  • 🔹 Power Status LED
  • 🔹 Four Mounting Holes for Secure Installation

📋 Hardware Overview

ComponentFunction
STM32F103C8T6Main Microcontroller
USB Micro ConnectorPower & USB Communication
LD1117-3.33.3V Voltage Regulation
SWD HeaderProgramming & Debugging
UART HeaderSerial Communication
I²C HeaderSensor & Peripheral Expansion
8 MHz CrystalSystem Clock Source
Power LEDBoard Power Indication

🛠️ Design Highlights

  • ✅ Designed completely in KiCad
  • ✅ Modular and well-organized schematic
  • ✅ Decoupling capacitors placed according to STM32 datasheet recommendations
  • ✅ Ferrite bead used to isolate analog and digital power supplies
  • ✅ Clean power distribution network
  • ✅ USB communication support
  • ✅ Beginner-friendly yet industry-inspired hardware design

📚 References

  • STM32F103C8T6 Datasheet
  • STMicroelectronics Hardware Design Guidelines (AN4879)
  • USB Hardware Design Recommendations
  • LD1117-3.3 Datasheet

🎯 Learning Outcomes

This project helped me gain practical experience in:

  • PCB Design using KiCad
  • STM32 Hardware Design
  • Power Supply Design
  • USB Interface Design
  • Crystal Oscillator Implementation
  • Embedded Hardware Development
  • PCB Layout Best Practices

📸 Project Preview

Add your schematic, PCB layout, 3D render, and completed board images here.


🚀 Future Improvements

  • USB ESD Protection
  • Reverse Polarity Protection
  • Reset Push Button
  • Boot Mode Selection Circuit
  • On-board ST-Link Programmer
  • Additional Test Points

⭐ If you found this project helpful or interesting, please consider giving it a Star. Feedback and suggestions are always welcome!# STM32-BOARD

Parts

33
QtyValueFootprintReferences
80.1uFCapacitor_SMD:C_0603_1608MetricC1, C5, C6, C7, C8, C9, C11, C12
4MountingHoleMountingHole:MountingHole_2.2mm_M2_Pad_ViaH1, H2, H3, H4
3Conn_01x04_SocketConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ1, J3, J4
210nFCapacitor_SMD:C_0603_1608MetricC2, C3
210uFCapacitor_SMD:C_0805_2012MetricC4, C13
24.7KResistor_SMD:R_0805_2012MetricR2, R3
110KCapacitor_SMD:C_0805_2012MetricR1
1120RCapacitor_SMD:C_0805_2012MetricFB1
11K5Resistor_SMD:R_0603_1608MetricR4
11uFCapacitor_SMD:C_0603_1608MetricC10
1220RResistor_SMD:R_0402_1005MetricR5
1Crystal_GND23Crystal:Crystal_SMD_Abracon_ABM3B-4Pin_5.0x3.2mmY1
1LD1117S33TR_SOT223Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1LEDLED_SMD:LED_0805_2012MetricD1
1STM32F103C8T6Package_QFP:TQFP-48_7x7mm_P0.5mmU1
1SW_Nidec_CAS-120A1Button_Switch_SMD:Nidec_Copal_CAS-120ASW1
1USB_B_MicroConnector_USB:USB_Micro-B_Wuerth_629105150521J2

The 32 most common of 33 parts.

Similar boards

  • 4 layers42 × 42 mmHuvud, the printed circuit board in 3D

    Huvud

    bondus/KlipperToolboard

    A 3D printer tool head controller board

    126 parts373GPL-3.0
  • 2 layers65 × 56 mmMMDVM HS Dual Hat, the printed circuit board in 3D

    MMDVM HS Dual Hat

    phl0/MMDVM_HS_Dual_Hat

    Duplex variant of MMDVM_HS_Hat

    216 parts218
  • 2 layers65.1 × 30.2 mmMmdvm hs hat, the printed circuit board in 3D

    Mmdvm hs hat

    mathisschmieder/MMDVM_HS_Hat

    MMDVM_HS Hat for the Raspberry Pi (Zero)

    144 parts201
  • 2 layers98 × 38 mmBldc control ver3, the printed circuit board in 3D

    Bldc control ver3

    pekkaroi/bldc-drive

    Cheap and simple brushless DC motor driver designed for CNC applications using STM32 microcontroller

    68 parts199GPL-2.0
  • 2 layers68 × 40 mmStm32-io extend, the printed circuit board in 3D

    Stm32-io extend

    hardenedlinux/cheap-pcb

    Cheap PCB: Better understanding the current status of hardware supply chain

    44 parts170CC0-1.0
  • 4 layers126.6 × 37.7 mmGruzik2.0, the printed circuit board in 3D

    Gruzik2.0

    NYDEREK/LineFollower_GRUZIK2.0-light

    GRUZIK2.0 is simple light construction made for "line follower light" competition

    50 parts101MIT
  • 2 layers100 × 85 mmVNA, the printed circuit board in 3D

    VNA

    profdc9/VNA

    Vector Network Analyzer based on the STM32F103C8T6 bluepill

    178 parts93
  • 2 layers30 × 49.3 mmUSB PD monitor V1, the printed circuit board in 3D

    USB PD monitor V1

    lhm0/pd_logger

    This repository contains two DIY gadgets to monitor and log USB-C Power Delivery (PD). Both devices are designed to be easy to build, hackable, and useful for makers who want to explore USB-C PD.

    34 parts82

Questions

How big is the SMT32 based hardware design PCB?

It measures 43.3 × 33.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SMT32 based hardware design use?

33 parts, built around the STM32F103C8T6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SMT32 based hardware design KiCad files?

From the Saroja-J/STM32-BOARD repository on GitHub, at the commit this page was made from: the board is STM32/SMT32 based hardware design.kicad_pcb and its schematic STM32/SMT32 based hardware design.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SMT32 based hardware design design in my own project?

Its repository states no licence, so its author keeps all rights: ask Saroja-J before reusing the design.