
IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

An Infrared (IR) sensor is an electronic device that detects and measures infrared radiation
Ir sensor is an open-source printed circuit board by Sanjeeviram07, from the Sanjeeviram07/IR_sensor_pcb-Design repository on GitHub. It is a 2-layer board of 68.6 × 17.8 mm with 9 parts on 7 nets, routed with 51 tracks and 3 vias.
It is built around the LM358. Its parts include 3 resistors, 3 diodes, 1 IC and 1 connector. It belongs with the sensors and measurement boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R3 |
| 2 | LED | LED_THT:LED_D3.0mm_Horizontal_O3.81mm_Z2.0mm | D1, D2 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Bourns_3266Y_Vertical | RV1 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | Conn_01x03_Pin | Connector:FanPinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | LED | LED_THT:LED_D5.0mm | D3 |
| 1 | LM358 | Package_DIP:DIP-8_W7.62mm_SMDSocket_SmallPads | U1 |

peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance


tvlad1234/pillScopePlus
Oscilloscope based around the STM32F401 Black Pill and a color LCD screen


starlightk7/OpenSFC
OSHW Reproduction Parts related to the Super Famicom / Super Nintendo game console

It measures 68.6 × 17.8 mm and has 2 copper layers, 1.6 mm thick.
9 parts, built around the LM358. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Sanjeeviram07/IR_sensor_pcb-Design repository on GitHub, at the commit this page was made from: the board is ir_sensor.kicad_pcb and its schematic ir_sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Sanjeeviram07 before reusing the design.