

Attempt
I'm a nerd
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 59
- Pads
- 161
- Tracks, vias
- 59, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 30 Sep 2025
- Updated
- 22 Jul 2026
Overview
Attempt is an open-source printed circuit board by SaltyMelonYT, from the SaltyMelonYT/PCB-Projects repository on GitHub, published under the MIT licence. It is a 2-layer board with 23 parts on 59 nets, routed with 59 tracks and 0 vias.
It is built around the RP2040 and W25Q16JVSSIQ. Its parts include 12 capacitors, 5 resistors, 3 ICs, 1 connector and 1 switch. It belongs with the RP2040 boards of this library.
Main components
2README
README.mdI'm a nerd
Incase that wasn't obvious haha. Here is a repository of a bunch of PCB's I've made, from a heart lightboard for your lover (It works) to lampnodes that connect to a central server!
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C2, C3, C4, C5, C6, C7, C10 |
| 2 | 10u | Capacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C1, C9 |
| 2 | 15p | Capacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C11, C12 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R5 |
| 2 | 27.4 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2 |
| 1 | 2u2 | Capacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C8 |
| 1 | ABMB-272-T3 | Crystal:Crystal_SMD_Abracon_ABS25-4Pin_8.0x3.8mm | Y1 |
| 1 | DNF | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | W25Q16JVSS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U3 |
More from SaltyMelonYT/PCB-Projects
12- 4 layers370 × 155 mm

- 2 layers

- 2 layers

- 2 layers100 × 100 mm

- 2 layers100 × 71 mm

- 2 layers98 × 70 mm

- 2 layers86 × 63 mm

- 2 layers91 × 68 mm

- 2 layers76.5 × 52.8 mm

- 2 layers90 × 60 mm

- 2 layers100 × 70 mm

- 2 layers89 × 68 mm

Similar boards
- 4 layers299 × 127 mm

- 2 layers285 × 94.6 mm

- 2 layers25.4 × 54.5 mm

Rpi pico debugger shoe
ShawnHymel/rpi-pico-debugger-shoe
Stackable debugger board for the Raspberry Pi Pico. Solder long headers to this debugger board in order to connect the Pico to it.
49 parts84 - 4 layers96 × 28 mm

- 2 layers21 × 49.5 mm

- 4 layers53 × 42 mm

MioLink
Misaka0x2730/MioLink
ARM JTAG/SWD debugger (BlackMagic port) based on RP2040.
117 parts30GPL-3.0 - 4 layers190 × 100 mm

Rioctrl controller
festlv/rioctrl-hw
Hardware design for modular CNC controller
281 parts16CERN-OHL-S-2.0 - 2 layers53.3 × 68.3 mm

Questions
What parts does the Attempt use?
23 parts, built around the RP2040 and W25Q16JVSSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Attempt KiCad files?
From the SaltyMelonYT/PCB-Projects repository on GitHub, at the commit this page was made from: the board is FirstC-Routed/Attempt/Attempt.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Attempt design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).