Skip to the content
2 layers90 × 50 mmStrangerFamily, the printed circuit board in 3D

A Stranger Things-inspired illuminated alphabet

Size
90 × 50 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
64
Pads
134
Tracks, vias
178, 8
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
2 Dec 2017
Updated
21 Sep 2025

Overview

StrangerFamily is an open-source printed circuit board by Salamandar, from the Salamandar/StrangerFamily repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 90 × 50 mm with 26 parts on 64 nets, routed with 178 tracks and 8 vias.

It is built around the 74LVC1G3157, 74LVC2T45DC and BSS138. Its parts include 9 resistors, 6 connectors, 3 transistors, 2 ICs and 1 capacitor. It belongs with the AVR (ATmega, ATtiny) and Raspberry Pi (Linux) boards of this library.

Main components

3

README

README.md

StrangerFamily

A Stranger Things-inspired illuminated alphabet, based on a raspberrypi zero and ws2812B led strips. strangerthings-alphabet-wall-1568829179

Project structure

  • pcb: A RaspberryPi Zero kind-of-HAT with power + LED connectors + level shifter.
  • pyStranger: a Python3 project for displaying sentences from a file and/or a keyboard
  • StrangerPi: CustomPiOS-based project to generate a raspberry pi imae
  • arduinoSerialPixel: experimental "bridge" between raspberry pi and ws2812 leds.

Parts

26
QtyValueFootprintReferences
710kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4, R5, R6, R7, R9, R11, R12
3BSS138Package_TO_SOT_SMD:SOT-23Q2, Q3, Q4
2LED_Out2Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_HorizontalJ4, J6
1470Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR10
174LVC1G3157Package_TO_SOT_SMD:Texas_R-PDSO-G6U2
174LVC2T45DCPackage_SO:VSSOP-8_2.3x2mm_P0.5mmU1
1Arduino_Nano_v3.xModule:Arduino_NanoA1
1CCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1
1DDiode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1
1JumperJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP1
1LCD_ConnConnector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_HorizontalJ1
1LOGOstranger_family_lib:logo_klorydrykG***
1LOGOstranger_family_lib:logo_salamandarG***
1Output_LEDConnector_JST:JST_XH_S3B-XH-A_1x03_P2.50mm_HorizontalJ3
1Power_LEDsConnector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.5_1x02_P3.50mm_HorizontalJ2
1RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
1Raspberry_Pi_zerostranger_family_lib:Raspberry_Pi_Zero_Socketed_THT_FaceDown_MountingHolesJ5

Similar boards

  • 4 layers94.3 × 81.8 mmYukaLink revA, the printed circuit board in 3D

    YukaLink revA

    Misaka0x2730/YukaLink

    Dual targets USB+ETH ARM JTAG/SWD debugger (BlackMagic port) based on RP2350. JTAG and SWD interfaces are implemented on PIO.

    321 parts3GPL-3.0
  • 4 layers53 × 42 mmMioLink, the printed circuit board in 3D

    MioLink

    Misaka0x2730/MioLink

    ARM JTAG/SWD debugger (BlackMagic port) based on RP2040.

    117 parts30GPL-3.0
  • 4 layers36 × 77 mmUprobe-0.1, the printed circuit board in 3D

    Uprobe-0.1

    xx0x/uprobe

    uconsole debug probe

    108 parts
  • 4 layers101.6 × 141.7 mmPiPtr, the printed circuit board in 3D

    PiPtr

    jmlzone/PiPtr

    Repeater controller

    388 parts8
  • 4 layers89.8 × 64 mmStinger V2.0, the printed circuit board in 3D

    Stinger V2.0

    Project-Stinger/Electronics

    Electronics for Stinger foam dart blasters

    126 parts4
  • 2 layers111 × 119 mmCarte Principale, the printed circuit board in 3D

    Carte Principale

    clubrobot/Cartes-elec

    Repo de toutes les cartes électroniques utilisées par le CRINSA. Commencé en 2025 sous Kicad 8.0

    115 parts1MIT
  • 4 layers192.5 × 80 mmPlugInDC Load, the printed circuit board in 3D

    PlugInDC Load

    janni0609/DC-Load

    A programmable DC electronic load built on the Raspberry Pi Pico 2 (RP2350). It sinks a user-defined current from a DC source under test and measures voltage, current, power, capacity, and energy in real time on a…

    525 parts

Questions

How big is the StrangerFamily PCB?

It measures 90 × 50 mm and has 2 copper layers, 1.6 mm thick.

What parts does the StrangerFamily use?

26 parts, built around the 74LVC1G3157, 74LVC2T45DC and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the StrangerFamily KiCad files?

From the Salamandar/StrangerFamily repository on GitHub, at the commit this page was made from: the board is pcb/StrangerFamily.kicad_pcb and its schematic pcb/StrangerFamily.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the StrangerFamily design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).