Skip to the content
2 layers105.1 × 77.7 mmArm, the printed circuit board in 3D

Designed a Robotic Arm PCB

Size
105.1 × 77.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
53
Nets
57
Pads
161
Tracks, vias
293, 24
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
10 Oct 2025
Updated
10 Oct 2025

Overview

Arm is an open-source printed circuit board by Sagnik-Tech, from the Sagnik-Tech/Robotic-Arm-PCB-Design repository on GitHub. It is a 2-layer board of 105.1 × 77.7 mm with 53 parts on 57 nets, routed with 293 tracks and 24 vias.

It is built around the 1N4448W. Its parts include 19 connectors, 10 resistors, 8 capacitors, 4 diodes and 3 ICs. It belongs with the RP2040 boards of this library.

Main components

1

README

README.md

Robotic-Arm-PCB-Design

Designed a control PCB for a robotic arm with Raspberry Pi Pico as its MCU. It is used to control the stepper motors NEMA17 and NEMA23 that are present in the joints of the robotic arm.

Parts

53
QtyValueFootprintReferences
12Conn_01x02Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_HorizontalJ8, J9, J10, J11, J12, J13, J14, J15, J16, J17, J18, J19
5Conn_01x02Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_HorizontalJ21, J22, J23, J32, J34
310kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2, R16, R39
3LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD2, D14, D15
3TestPointTestPoint:TestPoint_Pad_D2.0mmTP1, TP2, TP3
20.1uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC21, C22
2100Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR38, R41
2100nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2, C4
222pFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C19
110uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC20
1120Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR15
116MHzCrystal:Crystal_HC49-U_VerticalY1
11N4448WDiode_SMD:D_SOD-123D1
11nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC3
1282837-2282837-2:TE_282837-2P1
12kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
13.6kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR37
15.23kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR40
19.1kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR36
1ACS712ACS712:SO08U1
1Conn_01x02Connector_Phoenix_GMSTB:PhoenixContact_GMSTBA_2,5_2-G-7,62_1x02_P7.62mm_HorizontalJ20
1LOGOhalo:oddG***
1LOGOhalo:saG***
1MCP2515-xSOPackage_SO:SOIC-18W_7.5x11.6mm_P1.27mmU5
1RaspberryPi_Pico_WModule:RaspberryPi_Pico_Common_THTA1
1TJA1050T_CM_118TJA1050T_CM_118:SOIC127P600X175-8NU6

The 51 most common of 53 parts.

Similar boards

  • 4 layers350 × 155 mmVentilator, the printed circuit board in 3D

    Ventilator

    RespiraWorks/Ventilator

    Fully-featured ICU ventilator design, optimized for manufacture using commonly available components and free to license.

    788 parts169Apache-2.0
  • 2 layers126.7 × 100.2 mmInput, the printed circuit board in 3D

    Input

    jamessa/Pragmatic

    A modular split keyboard kit.

    114 parts73MIT
  • 2 layers178.3 × 100.1 mmGP1294-Teens4, the printed circuit board in 3D

    GP1294-Teens4

    mariosgit/VFD

    Drivers for a bunch of VFD displays, like the MN12832, ...

    106 parts27MIT
  • 2 layers230.6 × 109.5 mmCh55p34, the printed circuit board in 3D

    Ch55p34

    doesntfazer/Ch55p34-keyboard

    34 key unibody keyboard based on CH552t

    79 parts14GPL-3.0
  • 2 layers230.6 × 92.8 mmAlpha4, the printed circuit board in 3D

    Alpha4

    1000eyed/shiva

    A 12U 40% keyboard supporting multiple layouts, offset space bar row, and LEDs.

    154 parts9MIT
  • 4 layers481.3 × 23.7 mmFaraday rescue bms, the printed circuit board in 3D

    Faraday rescue bms

    nhallsny/faraday-rescue

    Open source battery for e-bikes made by the now-defunct Faraday Bicycles

    155 parts8CERN-OHL-P-2.0
  • 4 layers100 × 60 mmDraytronics Daisy PCB V1, the printed circuit board in 3D

    Draytronics Daisy PCB V1

    ghostseven/Draytronics-Daisy-PCB-V1

    An open source macro pad with rotary encoders and under glow, designed to be easily built with through hole components.

    54 parts2
  • 2 layers71.5 × 76 mmRover monitor r4, the printed circuit board in 3D

    Rover monitor r4

    jerryok826/rover-monitor

    Rover monitor is a simple info center for the JPL open-source-rover project

    38 parts2

Questions

How big is the Arm PCB?

It measures 105.1 × 77.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Arm use?

53 parts, built around the 1N4448W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Arm KiCad files?

From the Sagnik-Tech/Robotic-Arm-PCB-Design repository on GitHub, at the commit this page was made from: the board is Arm.kicad_pcb and its schematic Arm.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Arm design in my own project?

Its repository states no licence, so its author keeps all rights: ask Sagnik-Tech before reusing the design.