Skip to the content
2 layers230.6 × 92.8 mmAlpha4, the printed circuit board in 3D

A 12U 40% keyboard supporting multiple layouts, offset space bar row, and LEDs.

Size
230.6 × 92.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
154
Nets
72
Pads
438
Tracks, vias
1,070, 53
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
22 Jun 2024
Updated
22 Nov 2024

Overview

Alpha4 is an open-source printed circuit board by 1000eyed, from the 1000eyed/shiva repository on GitHub, published under the MIT licence. It is a 2-layer board of 230.6 × 92.8 mm with 154 parts on 72 nets, routed with 1,070 tracks and 53 vias.

It is built around the 1N4448W. Its parts include 51 diodes, 2 switches and 1 IC. It belongs with the keyboards and input boards and the nRF52 and nRF5x boards of this library.

Main components

1

README

README.md

SHIVA

A 12U 40% keyboard supporting multiple layouts, offset space bar row, and LEDs.

Front1

About

This keyboard supports as many different layouts as possible. Currently supported are: ortho, alpha stagger, uniform 0.25U stagger, normal stagger, plus multiple space row configurations. After all, you got 5 PCBs.

  • designed around Gateron KS27/KS33 low profile switches.
  • rotary encoder support.
  • bluetooth connection only. USB connection possible with an appropriate case.
  • leds to display connection/battery status.
  • nice!nano MCU.
  • ZMK keyboard firmware support.
  • open source.

KLE

See possible configurations below:

How to build one

I provide all the production files you will need in order to assemble the keyboard. In prod folder you will find the PCB gerbers and STLs for case (only one configuration is supported now). I intended the case to be CNC'd from PC, however it is not tested yet and only 3D printed it so far. There are no build instructions, as everything should be self-explanatory.

Part list

#namecomments
1main PCBOrder at fabricator of your choice
1Nice!nano v2Controller board. Make sure you have enough sockets for all pins.
1EC11Rotary Encoder through hole style (optional)
~451N4148 - SOD-123Diodes
3LED 3mmChoose red, yellow (orange), and green
1MSK-12C02Power switch
1JST 1.25mm pitchBattery connector, 2pin. I used S2B-PH-K-S(LF)(SN)
13.7V LiPoBattery
~45KS33 or KS27Gateron Low Profile switches
~45KeycapsMX-compatible keycaps of your choice

My personal ZMK config: https://github.com/1000eyed/zmk-config-shiva

Open source

In source directory you will find the source files for the PCB and the case. You may use them however you like, I kindly ask you though to link back to my project, should you build it or update something.

Gallery

Parts

154
QtyValueFootprintReferences
97MX_SW_solderKicad footprints:gateron-ks27MX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX101 +81
451N4448WKicad footprints:D_SOD-123 invisible designatorD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +29
6LEDLED_THT:LED_D3.0mmD44, D45, D46, D47, D48, D49
2LOGOalpha4:shivaG***, G***
1Battery_CellConnector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalBT1
1RotaryEncoder_SwitchPCM_marbastlib-various:ROT_Alps_EC11E-SwitchSW1
1SW_DIP_x01PCM_marbastlib-various:SW_MSK12C02-HBSW2
1nice_nanoPCM_marbastlib-xp-promicroish:nice_nano_AH_USBupU1

Similar boards

  • 4 layers350 × 155 mmVentilator, the printed circuit board in 3D

    Ventilator

    RespiraWorks/Ventilator

    Fully-featured ICU ventilator design, optimized for manufacture using commonly available components and free to license.

    788 parts169Apache-2.0
  • 2 layers126.7 × 100.2 mmInput, the printed circuit board in 3D

    Input

    jamessa/Pragmatic

    A modular split keyboard kit.

    114 parts73MIT
  • 2 layers178.3 × 100.1 mmGP1294-Teens4, the printed circuit board in 3D

    GP1294-Teens4

    mariosgit/VFD

    Drivers for a bunch of VFD displays, like the MN12832, ...

    106 parts27MIT
  • 2 layers230.6 × 109.5 mmCh55p34, the printed circuit board in 3D

    Ch55p34

    doesntfazer/Ch55p34-keyboard

    34 key unibody keyboard based on CH552t

    79 parts14GPL-3.0
  • 4 layers481.3 × 23.7 mmFaraday rescue bms, the printed circuit board in 3D

    Faraday rescue bms

    nhallsny/faraday-rescue

    Open source battery for e-bikes made by the now-defunct Faraday Bicycles

    155 parts8CERN-OHL-P-2.0
  • 4 layers100 × 60 mmDraytronics Daisy PCB V1, the printed circuit board in 3D

    Draytronics Daisy PCB V1

    ghostseven/Draytronics-Daisy-PCB-V1

    An open source macro pad with rotary encoders and under glow, designed to be easily built with through hole components.

    54 parts2
  • 2 layers71.5 × 76 mmRover monitor r4, the printed circuit board in 3D

    Rover monitor r4

    jerryok826/rover-monitor

    Rover monitor is a simple info center for the JPL open-source-rover project

    38 parts2
  • 6 layers152.4 × 92 mmGpsrx, the printed circuit board in 3D

    Gpsrx

    bgelb/gpsrx

    289 parts1

Questions

How big is the Alpha4 PCB?

It measures 230.6 × 92.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Alpha4 use?

154 parts, built around the 1N4448W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Alpha4 KiCad files?

From the 1000eyed/shiva repository on GitHub, at the commit this page was made from: the board is source/shiva-pcb/alpha4.kicad_pcb and its schematic source/shiva-pcb/alpha4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Alpha4 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).