2 layers16.5 × 16.2 mm
2 layers64 × 84.5 mm
Ilomusiali
SadaleNet/ilo-musi-8ilo musi pi nasin CHIP-8
- Size
- 64 × 84.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 85
- Nets
- 66
- Pads
- 243
- Tracks, vias
- 667, 67
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 27 Sep 2026
- Updated
- 26 Oct 2026
Overview
Ilomusiali is an open-source printed circuit board by SadaleNet, from the SadaleNet/ilo-musi-8 repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 64 × 84.5 mm with 85 parts on 66 nets, routed with 667 tracks and 67 vias.
It is built around the CH32V006F8U7, TX4310B and 1N4148WS, with the AO3400A, AO3401A and SK12D07VG4 among its other parts. Its parts include 20 diodes, 18 switches, 17 resistors, 16 capacitors and 5 connectors. It belongs with the RISC-V boards of this library.
Main components
6
CH32V006F8U7
QFN-20QFN-20 Microcontrollers (MCU/MPU/SOC) ROHSWCH (Nanjing Qinheng Microelectronics)Microcontrollers (MCU/MPU/SOC)
TX4310B
SOT-23-6-40℃~+85℃ 1.2MHz 1.8V~5V 3.17V~3.43V 300mA 650uA 83% boost converter SOT-23-6 Charge Pumps ROHSXDSCharge Pumps
1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching Diodes
AO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
SK12D07VG4
插件-25℃~+70℃ 5,000 cycles 500mA 50V 8.8mm PC Pin Rectangular Columnar Right Angle SPDT 插件 Slide Switches ROHSSHOU HANSlide Switches
Parts
85| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | Red/0603 | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4, D5, D6, D7, D10, D11, D12, D13, D14, D15, D16, D17, D18 +2 |
| 17 | 6x3.5x4.3 | project_components:ZX-QC36-4.3TPWD | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17 +1 |
| 7 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C6, C7, C9, C11, C12, C15, C16 |
| 7 | 51k | Resistor_SMD:R_0603_1608Metric | R3, R6, R7, R11, R13, R15, R16 |
| 5 | 100n | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C8, C10 |
| 5 | 33k | Resistor_SMD:R_0603_1608Metric | R5, R14, R19, R24, R29 |
| 4 | 200 | Resistor_SMD:R_0603_1608Metric | R1, R4, R12, R34 |
| 2 | 10u/0805 | Capacitor_SMD:C_0805_2012Metric | C13, C14 |
| 2 | 15p | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 1N4148WS | Diode_SMD:D_SOD-323 | D19, D20 |
| 2 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q3 |
| 1 | 2.54mmTP | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | 20 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 24M/CL=12pf | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 2xAA/ZH1.5 | Connector_JST:JST_ZH_S2B-ZR-SM4A-TF_1x02-1MP_P1.50mm_Horizontal | J5 |
| 1 | A01SB141B1 | project_components:USB_Micro-B_A01SB141B1-067 | J3 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | CH32V006F8U7 | Package_DFN_QFN:QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm | U1 |
| 1 | FPC/0.5mm/bottom contact | project_components:Jushuo_AFC01-S14FCx-00_14P_P0.50mm_Horizontal | J1 |
| 1 | LOGO | project_components:sadale | G*** |
| 1 | NetTie_2 | project_components:NetTie-2_SMD_Pad0.2mm | NT1 |
| 1 | PiezoBuzzer | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm_Relief | BZ1 |
| 1 | SHOU_HAN_TF_PUSH | project_components:SHOU_HAN_TF_PUSH | J4 |
| 1 | SK12D07VG4 | Button_Switch_THT:SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW18 |
| 1 | TX4310B | Package_TO_SOT_SMD:SOT-23-6 | U3 |
Similar boards
- 4 layers170.2 × 111.2 mm
E paper picture frame HW
JosefTAv/E-paper-picture-frame-HW
Hardware files for ESP32 based E-paper picture frame
110 partsMIT - 2 layers43 × 43 mm
- 4 layers140 × 100 mm
Dc usv
TobleMiner/DC-UPS
A small DC UPS, designed to keep small appliances like consumer network equipment running during power outages
351 parts223CERN-OHL-P-2.0 - 4 layers118 × 117 mm
Cm4-robot
Twisted-Fields/acorn-robot-electronics
PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.
268 parts81 - 4 layers55 × 100.5 mm
OSS Radio Hardware Design
Arkos-Engineering/HT-15_hardware
We can split this out into separate repos later, right now its very convenient to have everything here.
256 parts72 - 4 layers115.5 × 96.2 mm
Closed deck x4
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
245 parts19 - 2 layers40 × 20 mm
Questions
How big is the Ilomusiali PCB?
It measures 64 × 84.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ilomusiali use?
85 parts, built around the CH32V006F8U7, TX4310B, 1N4148WS and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ilomusiali KiCad files?
From the SadaleNet/ilo-musi-8 repository on GitHub, at the commit this page was made from: the board is kicad/ilomusiali.kicad_pcb and its schematic kicad/ilomusiali.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ilomusiali design in my own project?
Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).