2 layers48.1 × 46.7 mm
2 layers47.6 × 48.2 mm
SPIvSPI SAO Black
SPIvSPI/dc27sao4Blackhat spy & Whitehat spy SAO from Def Con 27
- Size
- 47.6 × 48.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 34
- Pads
- 104
- Tracks, vias
- 526, 22
- Pours
- 43
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Jul 2019
- Updated
- 7 Jan 2023
Overview
SPIvSPI SAO Black is an open-source printed circuit board by SPIvSPI, from the SPIvSPI/dc27sao repository on GitHub, published under the MIT licence. It is a 2-layer board of 47.6 × 48.2 mm with 38 parts on 34 nets, routed with 526 tracks and 22 vias.
It is built around the EFM8BB10F8G-A-SOIC16R. Its parts include 16 resistors, 14 diodes, 2 capacitors, 2 connectors and 1 IC. It belongs with the Silicon Labs (EFR32, EFM) boards of this library.
Main components
1README
README.mddc27sao
███████╗██████╗ ██╗██╗ ██╗███████╗██████╗ ██╗
██╔════╝██╔══██╗██║██║ ██║██╔════╝██╔══██╗██║
███████╗██████╔╝██║██║ ██║███████╗██████╔╝██║
╚════██║██╔═══╝ ██║╚██╗ ██╔╝╚════██║██╔═══╝ ██║
███████║██║ ██║ ╚████╔╝ ███████║██║ ██║
╚══════╝╚═╝ ╚═╝ ╚═══╝ ╚══════╝╚═╝ ╚═╝Blackhat spy & Whitehat spy SAO from Def Con 27
The pencil sketch that started it all on June 14th:
Bling bling:
WTF is all this crap
/firmware- shitty code that runs the blinkenlites/gui- not-so-shitty gui animation code generator tool (with shittyness added in a rush at the end)/hardware- schematics and pcb stuff/img- some pix from the adventure
Other crap
- The twitters https://twitter.com/SPIvSPI
- Hackaday page https://hackaday.io/project/166811-spivspi-sao-dc27-badge
Guilty Parties
xres0nance - Hardware & firmware
steve/corelit - Over-excellent GUI animation toolShoutz n Greetz
true, cprossu, aask, & WP crew - 8051 wisdom and moral support
jrwr - crazy drunk russians and a dope-ass hat
MCB - melted lead shoulder-to-shoulder, six pins at a time
woodencyborg - for diving in the deep end with us
pcbway - haulin' ass, gettin' paidand thanks to all our other cheerleaders! couldn't have done it without ya.
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 330 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R7, R8, R9, R11, R12, R13, R14, R15, R16 |
| 9 | GRN | SPIvSPI_SAO:SunLED_3.2x2.8mm_PLCC2_bottom | D6, D7, D8, D9, D10, D11, D12, D13, D14 |
| 3 | 220 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R5, R6 |
| 3 | YEL | SPIvSPI_SAO:SunLED_3.2x2.8mm_PLCC2_bottom | D3, D4, D5 |
| 2 | RED | SPIvSPI_SAO:SunLED_3.2x2.8mm_PLCC2_bottom | D1, D2 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4 |
| 1 | DNP | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R10 |
| 1 | EFM8BB10F8G-A-SOIC16 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | LOGO | SPIvSPI_SAO:SPIvSPI_SAO_Black_Silk | G*** |
| 1 | LOGO | SPIvSPI_SAO:SPIvSPI_SAO_Black_Mask_Knockout | G*** |
| 1 | MODE | SPIvSPI_SAO:C&K_PTS636_SMD_Tact_6.0x3.5_BACK | SW1 |
| 1 | PROG/BREAKOUT | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J2 |
| 1 | SAO.69 | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J1 |
More from SPIvSPI/dc27sao
1Similar boards
- 2 layers188 × 106.7 mm
Power Supply Rev01
Alex-Riviello/power_supply_mk1
Power supply created during ELE3000 - Personal project at Polytechnique Montreal (2017). The voltage is controlled by a PWM signal generated by a EFM8 Silicon Labs microcontroller.
113 parts - 2 layers30 × 8.5 mm
- 2 layers61.6 × 30 mm
SAL FP Keyboard LogicBoard
blu006/blu_BOB_and_MISC
My breakout boards and miscellaneous boards
13 parts - 2 layers85 × 115 mm
OSO BOOK C1
joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.
38 parts8.1kCC-BY-SA-4.0 - 2 layers38.1 × 12.7 mm
- 2 layers136 × 84 mm
Macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
38 parts915 - 2 layers126.4 × 15.2 mm
- 2 layers66 × 25.4 mm
Ardmover Empfangsspule Yann
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
38 parts282
Questions
How big is the SPIvSPI SAO Black PCB?
It measures 47.6 × 48.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SPIvSPI SAO Black use?
38 parts, built around the EFM8BB10F8G-A-SOIC16R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SPIvSPI SAO Black KiCad files?
From the SPIvSPI/dc27sao repository on GitHub, at the commit this page was made from: the board is hardware/SPIvSPI_SAO_Black/SPIvSPI_SAO_Black.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SPIvSPI SAO Black design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).