

The 2024 - 2026 rover electrical monorepo
- Size
- 107 × 63 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 83
- Nets
- 106
- Pads
- 340
- Tracks, vias
- 693, 105
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 28 Apr 2024
- Updated
- 23 Jan 2026
Overview
Science is an open-source printed circuit board by SJSURoboticsTeam, from the SJSURoboticsTeam/urc-electrical-2026 repository on GitHub. It is a 2-layer board of 107 × 63 mm with 83 parts on 106 nets, routed with 693 tracks and 105 vias.
It is built around the PCA9685PW, AMS1117-5.0 and LF33CPT-TR, with the B250 and SMBJ45CA among its other parts. Its parts include 23 resistors, 9 capacitors, 7 diodes, 3 ICs and 3 transistors. It belongs with the robots and motor control boards of this library.
Main components
5PCA9685PW
TSSOP-28-40℃~+85℃ 100kHz~1MHz 16 2.3V~5.5V 25mA 5.5V Built-in PWM TSSOP-28 LED Drivers ROHSNXP SemiconductorsLED DriversAMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLF33CPT-TR
TO-252-5-40℃~+125℃@(Tj) 1 16V 3.3V 500mA 500uA 50uVrms 700mV@(500mA) 80dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive TO-252-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsB250
SMB-65℃~+150℃ 1 Independent 2A 500uA@50V 50A 50V 700mV@2A SMB Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesSMBJ45CA
SMB(DO-214AA)ESD And Surge Protection (TVS/ESD)BORN
README
README.mdURC Electrical Repository 2024-2026
This is the repository for the SJSU Robotics Club Electrical team repository from 2024-2026.
Parts
83| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Resistor_SMD:R_0603_1608Metric | R13, R16, R17, R18, R23, R30, R31 |
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C7 |
| 5 | 5.1k | Resistor_SMD:R_0603_1608Metric | R20, R21, R27, R28, R29 |
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric | C5, C6, C8, C9 |
| 4 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | EXT_PWR1, LT1, LT2, RGB1 |
| 4 | D_Schottky | Diode_SMD:D_SMA | D9, D10, D11, D12 |
| 4 | Hall | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-3P_1x03_P2.54mm_Horizontal | Hall1, Hall2, Hall3, Hall4 |
| 4 | LED_GRN | LED_SMD:LED_0805_2012Metric | +3.3V1, +5V1, +24V1, VBAT1 |
| 4 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | FAN1, LSR1, LSR2, PWR1 |
| 3 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric | R33, R35 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R14, R15 |
| 2 | 2.2k | Resistor_SMD:R_0603_1608Metric | R24, R26 |
| 2 | 6.8k | Resistor_SMD:R_0603_1608Metric | R32, R34 |
| 2 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | I2C1, J7 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | Q_NMOS_GDS | Package_TO_SOT_SMD:TO-252-2 | Q8, Q9 |
| 2 | SW_SPST | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1, SW2 |
| 1 | 270srv1 | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-3P_1x03_P2.54mm_Horizontal | 270srv1 |
| 1 | 270srv2 | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-3P_1x03_P2.54mm_Horizontal | 270srv2 |
| 1 | 360srv1 | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-3P_1x03_P2.54mm_Horizontal | 360srv1 |
| 1 | 360srv2 | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-3P_1x03_P2.54mm_Horizontal | 360srv2 |
| 1 | 39k | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 500 | Resistor_SMD:R_0603_1608Metric | R25 |
| 1 | 560 | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | B250 | Diode_SMD:D_SMB | D8 |
| 1 | Conn_02x05_Odd_Even | SJSU_common:SWD_Conn | SWD1 |
| 1 | Fuse_Small | Fuse:Fuseholder_Littelfuse_Nano2_154x | F1 |
| 1 | LED_BLU | LED_SMD:LED_0603_1608Metric | D7 |
| 1 | LF33CPT-TR | SJSU_common:TO-252AD | U1 |
| 1 | MicroMod | SJSU_common:micromod | J16 |
| 1 | PCA9685PW | Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm | U2 |
| 1 | Q_NMOS_GDS | Package_TO_SOT_SMD:SOT-23 | Q7 |
| 1 | SMBJ45CA | Diode_SMD:D_SMB_Handsoldering | D13 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | USB_DATA1 |
| 1 | extr1 | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-3P_1x03_P2.54mm_Horizontal | 360srvX1 |
| 1 | extr2 | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-3P_1x03_P2.54mm_Horizontal | 270srvX1 |
| 1 | xT60F | Connector_AMASS:AMASS_XT60PW-F_1x02_P7.20mm_Horizontal | 24VIP1 |
| 1 | xT60M | Connector_AMASS:AMASS_XT60PW-M_1x02_P7.20mm_Horizontal | 40VOP1 |
| 1 | ~ | SJSU_common:BAT_HOLD | FAN_BATT1 |
More from SJSURoboticsTeam/urc-electrical-2026
12- 4 layers86.9 × 91.9 mm

- 4 layers50 × 45 mm

- 4 layers84.2 × 93 mm

- 4 layers159.2 × 93 mm

- 2 layers80 × 60 mm

- 4 layers85 × 50 mm

- 2 layers84.5 × 84.5 mm

- 4 layers61.1 × 40.4 mm

- 4 layers20 × 20 mm

- 2 layers66.9 × 46.9 mm

- 2 layers30 × 24 mm

- 4 layers65 × 56.5 mm

Similar boards
- 4 layers238.4 × 144.7 mm

- 2 layers100 × 53.5 mm

- 2 layers100 × 100 mm

- 2 layers32 × 36 mm

- 4 layers40.5 × 40.5 mm

CapstoneDronePCBV2
landodoughty/Flight-Controller
A Custom Flight Controller PCB I designed for one of my science fair projects.
53 partsMIT - 2 layers65.5 × 55 mm

Servo Board
CornellMarsRover/KiCad
This folder serves as the central repository for all KiCad PCB designs across multiple years. Each subfolder corresponds to a specific design cycle and contains all associated board files, schematics, and documentation.
112 parts - 2 layers220 × 329.2 mm

Control Boards
nasa-jpl/open-source-rover
A build-it-yourself, 6-wheel rover based on the rovers on Mars!
148 parts9.8kApache-2.0 - 4 layers100.1 × 60.2 mm

Hades
pms67/HadesFCS
Complete flight control system designed from scratch. Hardware designed with KiCad.
215 parts1kBSD-3-Clause
Questions
How big is the Science PCB?
It measures 107 × 63 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Science use?
83 parts, built around the PCA9685PW, AMS1117-5.0, LF33CPT-TR and B250. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Science KiCad files?
From the SJSURoboticsTeam/urc-electrical-2026 repository on GitHub, at the commit this page was made from: the board is Science/Science.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Science design in my own project?
Its repository states no licence, so its author keeps all rights: ask SJSURoboticsTeam before reusing the design.