
Braille Evaluation Board
DeflateAwning/Framework-Braille-Display
A braille display for the Framework 13 laptop's touchpad, hopefully

PCB design for STM32 seminar
STM32 seminaer is an open-source printed circuit board by SHIGEMAL, from the SHIGEMAL/Seminar_Board repository on GitHub. It is a 2-layer board of 177 × 106 mm with 43 parts on 107 nets, routed with 1,279 tracks and 133 vias.
It is built around the BME280, TBD62083APG and TBD62783APG, with the 2SC1815 among its other parts. Its parts include 15 resistors, 8 ICs, 5 diodes, 5 connectors and 4 switches. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 120 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R6, R7, R8, R9, R10, R11, R12, R13 |
| 4 | 120 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R3, R4, R5 |
| 4 | SW_MEC_5E | Library:TVGP01-G73 | SW1, SW2, SW3, SW4 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3 |
| 2 | 4.7k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R14, R15 |
| 2 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4, J5 |
| 1 | 180 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D5 |
| 1 | 2SC1815 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | 93C86 | Library:93C86 | U4 |
| 1 | BlueLED | LED_THT:LED_D3.0mm | LED1 |
| 1 | CN10 | Connector_PinSocket_2.54mm:PinSocket_2x19_P2.54mm_Vertical | J2 |
| 1 | CN7 | Connector_PinSocket_2.54mm:PinSocket_2x19_P2.54mm_Vertical | J1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J3 |
| 1 | DHT-20 | Library:DHT20 | U7 |
| 1 | GREENLED | LED_THT:LED_D3.0mm | LED2 |
| 1 | MCP9700Ax-TO92 | Library:MCP9700 | U8 |
| 1 | OSL40391 | Library:OSL40391-LX | U5 |
| 1 | RedLED | LED_THT:LED_D3.0mm | LED4 |
| 1 | SC1602BS | Library:SC1602X | U1 |
| 1 | TBD62083APG | Library:TBD62083APG | U6 |
| 1 | TBD62783A | Library:TBD62783APG | U3 |
| 1 | TSR_3386_103 | Library:TSR-3386-103 | RV1 |
| 1 | UGC0903EPD | Library:UGCM0903EPD | LS1 |
| 1 | YELLOWLED | LED_THT:LED_D3.0mm | LED3 |
| 1 | bme280 | Library:bme280 | U2 |

DeflateAwning/Framework-Braille-Display
A braille display for the Framework 13 laptop's touchpad, hopefully

njKessel/ESP32s3-NetworkClock
ESP32-S3 smart clock with LED display, weather, moon phase, temperature, Google Calendar



DenKen-NITNC/EleMagHarmony
Band Instrument (Part) : - Stepping Motor (Melody) - Solenoid (Guitar) - Floppy Disc Drive (Base) - Relay (Drum)

RobertPHeller/2ndGenLocoControlStand
Model 2nd Generation Diesel Locomotive Control Stand

Karpova-Lab/pyControl-D-Series-Breakout
A breakout board for use with pyControl behavior control framework

mnorden81/RC-Multiswitch-Sound-ESP32-S3
CRSF Multiswitch plus Soundmodul, ESP32-S3-DevKitC-1, KiCad und Firmware
It measures 177 × 106 mm and has 2 copper layers, 1.6 mm thick.
43 parts, built around the BME280, TBD62083APG, TBD62783APG and 2SC1815. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SHIGEMAL/Seminar_Board repository on GitHub, at the commit this page was made from: the board is STM32_seminaer.kicad_pcb and its schematic STM32_seminaer.kicad2_sch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask SHIGEMAL before reusing the design.