This repository uses the SFU Satellite Team's KiCad component library as a submodule. To start working on the repository:
Eps is an open-source printed circuit board by SFUSatClub, from the SFUSatClub/eps-hardware repository on GitHub. It is a 4-layer board of 95.9 × 90.2 mm with 194 parts on 140 nets, routed with 1,357 tracks and 382 vias.
It is built around the B3B-XH-A(LF)(SN), TPS22967DSG and CSD17551Q3A, with the BAT54HT1G, 2N7002ET1G-ES and CSD25402Q3A among its other parts. Its parts include 64 capacitors, 52 resistors, 10 transistors, 6 connectors and 5 ICs. It belongs with the FPGA and CPLD boards of this library.
KiCad project of the cubesat electrical power subsystem test article in preparation for the Canadian Satellite Design Challenge
This repository uses the SFU Satellite Team's KiCad component library as a submodule. To start working on the repository:
1. Open the git shell
2. Navigate to the directory you wish to place the repository inside
3. git clone --recursive "https://github.com/SFUSatClub/eps-hardware.git"
4. cd .\eps-hardware\KiCad-Lib\
5. git checkout masterIf you modify either the component schematic or footprint libraries you must push those changes to the SFUSatClub/KiCad-Lib repository.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | TEST | SFUSat:Measurement_Point_Round-SMD-Pad_Small | TP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 +16 |
| 12 | DNP | SFUSat-res:R_0603 | R14, R15, R16, R19, R21, R22, R34, R35, R38, R42, R43, R44 |
| 6 | 10u | SFUSat-cap:C_0805 | C44, C46, C47, C49, C50, C52 |
| 6 | 10u0 | SFUSat-cap:C_0805 | C4, C6, C17, C19, C20, C21 |
| 4 | 10.0 uF | Capacitors_SMD:C_1210 | C11, C13, C61, C62 |
| 4 | 100n0 | SFUSat-cap:C_0603 | C2, C28, C48, C60 |
| 4 | 10k0 | SFUSat-res:R_0603 | R6, R36, R37, R40 |
| 4 | 68.0 uF | Capacitors_SMD:C_1206 | C59, C63, C64, C65 |
| 4 | CSD17551Q3A | SFUSat:8-PowerWDFN | Q9, Q10, Q11, Q12 |
| 4 | DNP | SFUSat-cap:C_0805 | C3, C18, C53, C54 |
| 4 | DNP | SFUSat-cap:C_0603 | C23, C33, C37, C43 |
| 4 | PC104PTH | SFUSat:PC104PTH | J2, J3, J4, J5 |
| 3 | 100p0 | SFUSat-cap:C_0603 | C5, C39, C41 |
| 3 | 10R0 | SFUSat-res:R_0603 | R24, R49, R54 |
| 3 | BAT54HT1G | SFUSat:SOD-323 | D2, D3, D5 |
| 2 | 0R | SFUSat-res:R_0603 | R18, R20 |
| 2 | 1.0 nF | Capacitors_SMD:C_0402 | C12, C14 |
| 2 | 100k0 | SFUSat-res:R_0603 | R4, R53 |
| 2 | 10R0 | SFUSat-res:R_1206 | R3, R17 |
| 2 | 10m0 | SFUSat-res:R_1206 | R27, R50 |
| 2 | 150p | SFUSat-cap:C_0603 | C32, C40 |
| 2 | 1u0 | SFUSat-cap:C_0603 | C1, C24 |
| 2 | 2N7002ET1G | SFUSat:SOT-23-3 | Q7, Q14 |
| 2 | 300k0 | SFUSat-res:R_0603 | R39, R48 |
| 2 | 33n0 | SFUSat-cap:C_0603 | C22, C27 |
| 2 | 383k0 | SFUSat-res:R_0603 | R25, R28 |
| 2 | 3R9 | SFUSat-res:R_1206 | R1, R2 |
| 2 | 3pin-DC-power | SFUSat:PJ-028-SMT-TR-3pin-DC-jack | P1, P2 |
| 2 | 47n | SFUSat-cap:C_0603 | C34, C35 |
| 2 | 4R99 | SFUSat-res:R_0603 | R26, R29 |
| 2 | B3B-XH-A(LF)(SN) | SFUSat:B3B-XH-A | U1, U4 |
| 2 | DMP3035SFG-7 | SFUSat:POWERDI3333-8 | Q5, Q8 |
| 2 | LIMIT_SWITCH | SFUSat:SS-3GLPD-L | SW1, SW2 |
| 2 | TPS22967 | SFUSat:TPS22967 | U5, U6 |
| 1 | 10.0 uH | SFUSat-ind:L_7447709100 | L3 |
| 1 | 100.0 nF | Capacitors_SMD:C_0402 | C15 |
| 1 | 100.0 nF | SFUSat-cap:C_0805 | C9 |
| 1 | 100k | SFUSat:R_0402 | R8 |
| 1 | 10k0 | SFUSat-res:R_0402 | R46 |
| 1 | 10n0 | SFUSat-cap:C_0603 | C29 |
| 1 | 10u0 | SFUSat-cap:C_1206 | C51 |
| 1 | 120k0 | SFUSat-res:R_0603 | R51 |
| 1 | 137k0 | SFUSat-res:R_0603 | R47 |
| 1 | 15p0 | SFUSat-cap:C_0402 | C36 |
| 1 | 1K | SFUSat-res:R_0402 | R23 |
| 1 | 1R0 | SFUSat-res:R_0805 | R31 |
| 1 | 1k62 | SFUSat-res:R_0402 | R10 |
| 1 | 1n0 | SFUSat-cap:C_0402 | C31 |
| 1 | 1n8 | SFUSat-cap:C_0402 | C26 |
| 1 | 1u | SFUSat-cap:C_0603 | C45 |
| 1 | 2.2 uH | SFUSat-ind:SRN8040-2R2Y | L2 |
| 1 | 20k0 | SFUSat-res:R_0603 | R5 |
| 1 | 21.5 kOhm | SFUSat:R_0402 | R12 |
| 1 | 22.0 uF | SFUSat-cap:C_1210 | C7 |
| 1 | 220k0 | SFUSat-res:R_0603 | R7 |
| 1 | 2M0 | SFUSat-res:R_0603 | R41 |
| 1 | 2u2 | SFUSat-cap:C_0603 | C38 |
| 1 | 2u2 | SFUSat-ind:L_8030 | L1 |
| 1 | 3.01 Ohm | SFUSat:R_0402 | R13 |
| 1 | 30k1 | SFUSat-res:R_0603 | R45 |
| 1 | 33p0 | SFUSat-cap:C_0402 | C25 |
| 1 | 4.7 uF | Capacitors_SMD:C_0805 | C16 |
| 1 | 40k2 | SFUSat-res:R_0402 | R32 |
| 1 | 47.0 uF | SFUSat-cap:C_0805 | C10 |
| 1 | 470.0 nF | Capacitors_SMD:C_0402 | C57 |
| 1 | 470n0 | SFUSat-cap:C_0805 | C30 |
| 1 | 47u | C_TANT_2917 | C56 |
| 1 | 49.9 kOhm | SFUSat:R_0402 | R11 |
| 1 | 64k9 | SFUSat-res:R_0603 | R55 |
| 1 | 680.0 pF | Capacitors_SMD:C_0402 | C58 |
| 1 | 680p | SFUSat-cap:C_0402 | C42 |
| 1 | 8.2 nF | Capacitors_SMD:C_0402 | C8 |
| 1 | B220A-13-F | DO-214AC | D4 |
| 1 | CD4555BPWR | SFUSat:TSSOP-16 | U10 |
| 1 | CSD25402Q3A | SFUSat:8-PowerWDFN | Q13 |
| 1 | CT6EP103 | SFUSat:CT6EP103 | RV1 |
| 1 | Conn_01x02 | Socket_Strips:Socket_Strip_Straight_1x02_Pitch2.54mm | JP1 |
| 1 | Conn_01x03 | Socket_Strips:Socket_Strip_Straight_1x03_Pitch2.54mm | JP7 |
| 1 | DCX124EK-7-F | SFUSat:SC-74 | Q6 |
| 1 | DNP | SFUSat-res:R_0402 | R9 |
The 181 most common of 194 parts.
Vincent-Cauquil/5A-Projet-Parking
PSM Major Project: A modular smart parking system combining AI (ANPR/OCR), real-time control (Zephyr/STM32), and FPGA-based motor management (LiteX RISC-V SoC), all coordinated via MQTT for seamless access control and…
Redherring32/100W-Charging-PCB
100W USB C PD Lithium Ion charging PCB based on the TPS25750D and BQ25713
SFUSatClub/Battery
This repository uses the SFU Satellite Team's KiCad component library as a submodule. To start working on the repository:
It measures 95.9 × 90.2 mm and has 4 copper layers, 1.6 mm thick.
194 parts, built around the B3B-XH-A(LF)(SN), TPS22967DSG, CSD17551Q3A and BAT54HT1G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SFUSatClub/eps-hardware repository on GitHub, at the commit this page was made from: the board is eps.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask SFUSatClub before reusing the design.