
Tiny Solar Powe Supply
Ruthvik-reddy-A/PCB-design-projects
Welcome to my curated collection of hardware design projects focused on practical, compact, and beginner-to-intermediate level printed circuit board (PCB) designs.

Welcome to my curated collection of hardware design projects focused on practical, compact, and beginner-to-intermediate level printed circuit board (PCB) designs. These projects were originally built to improve my skills in circuit design, PCB layout, power electronics, and embedded systems.
GPS GSM Tracker with EEPROM Logging is an open-source printed circuit board by Ruthvik-reddy-A, from the Ruthvik-reddy-A/PCB-design-projects repository on GitHub. It is a 4-layer board of 103.9 × 77.6 mm with 61 parts on 143 nets, routed with 770 tracks and 84 vias.
It is built around the PAT1220-C-10DB-T5, ESP32-S3-WROOM-1-N8 and SIM800C, with the MT3608, AMS1117-5.0 and CAT24C256LI among its other parts. Its parts include 19 resistors, 11 capacitors, 10 ICs, 7 diodes and 7 connectors. It belongs with the radio and wireless boards and the ESP32 boards of this library.
A simple, compact, and low-power LED torch circuit designed for basic lighting applications. This project demonstrates the use of common electronic components to build a reliable and reusable LED lighting system powered by batteries.
This LED torch uses a simple boost converter or current-limiting resistor circuit depending on configuration. It lights up one or more LEDs from a low-voltage battery source, offering basic illumination.
Typical components used:
| Component | Value / Part | Description |
|---|---|---|
| Q1 | 2N2222 / BC547 | NPN transistor |
| R1 | 100–470Ω | LED current-limiting resistor |
| LED1 | 5mm White LED | Main torch light |
| S1 | SPST Switch / Jumper | Torch On/Off control |
| Battery | AA / AAA / Coin cell | Power source (1.5–3V) |
| PCB | Custom single-sided | Compact torch layout |
The PCB is compact and designed to fit inside a small torch enclosure or be mounted on a keychain or clip. It includes pads for the switch, LED, and battery holder.
PCB layout, schematic, and Gerber files are included in the
/pcb/folder.
This project is open-source under the MIT License.
Feel free to modify, build upon, or use it in your own projects.
Designed by Ruthvik Reddy A
For questions, reach out at: reddy.ruthvik0411@gmail.com
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R9, R10, R11, R33 |
| 3 | 22pF | Capacitor_SMD:C_0805_2012Metric | C20, C21, C22 |
| 3 | 51 | Resistor_SMD:R_0805_2012Metric | R22, R23, R24 |
| 3 | Conn_01x04_Pin | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J2, J6, J7 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C14, C15 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R27, R28 |
| 2 | 330 | Resistor_SMD:R_0805_2012Metric | R20, R21 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric | R6, R7 |
| 2 | Conn_01x07_Pin | Connector_Molex:Molex_KK-254_AE-6410-07A_1x07_P2.54mm_Vertical | J5, J8 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D13, D14 |
| 2 | PAT1220-C-10DB | RF_Converter:RF_Attenuator_Susumu_PAT1220 | U12, U13 |
| 2 | R | Resistor_SMD:R_0805_2012Metric | R31, R32 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1, SW2 |
| 1 | 0.4 | Resistor_SMD:R_0805_2012Metric | R29 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R34 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C23 |
| 1 | 100uF | Capacitor_SMD:C_0805_2012Metric | C16 |
| 1 | 10pF | Capacitor_SMD:C_0805_2012Metric | C18 |
| 1 | 13k | Resistor_SMD:R_0805_2012Metric | R35 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C17 |
| 1 | 3.7 Li-ion | Battery:BatteryHolder_Keystone_1042_1x18650 | BT4 |
| 1 | 33pF | Capacitor_SMD:C_0805_2012Metric | C19 |
| 1 | 4.7uH | Inductor_SMD:L_0805_2012Metric | L2 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U6 |
| 1 | C | Capacitor_SMD:C_0805_2012Metric | C26 |
| 1 | CAT24C256 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | Conn_01x02_Pin | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J4 |
| 1 | D_Zener | Diode_SMD:D_SOD-323F | D10 |
| 1 | ESDA6V1SC5 | Package_TO_SOT_SMD:SOT-23-5 | D11 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | Green LED | LED_SMD:LED_0805_2012Metric | D8 |
| 1 | MT3608 | Package_TO_SOT_SMD:SOT-23-6 | U15 |
| 1 | NEO-8Q | RF_GPS:ublox_NEO | U4 |
| 1 | Orange LED | LED_SMD:LED_0805_2012Metric | D9 |
| 1 | Rprog | Resistor_SMD:R_0805_2012Metric | R30 |
| 1 | SIM800C | RF_GSM:SIMCom_SIM800C | U11 |
| 1 | SIM_Card | Connector_Card:nanoSIM_GCT_SIM8060-6-0-14-00 | J9 |
| 1 | SS14 | Diode_SMD:D_SMA | D5 |
| 1 | TP4056 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U14 |
| 1 | TXS0108EPW | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U7 |
| 1 | Thermistor_NTC | Package_TO_SOT_THT:Heraeus_TO-92-2 | TH3 |
| 1 | UART | Connector_USB:USB_Micro-AB_Molex_47590-0001 | UART |
| 1 | USB | Connector_USB:USB_Micro-AB_Molex_47590-0001 | USB |

Ruthvik-reddy-A/PCB-design-projects
Welcome to my curated collection of hardware design projects focused on practical, compact, and beginner-to-intermediate level printed circuit board (PCB) designs.

Ruthvik-reddy-A/PCB-design-projects
Welcome to my curated collection of hardware design projects focused on practical, compact, and beginner-to-intermediate level printed circuit board (PCB) designs.

CalgaryToSpace/CTS-Ground-Station-UHF-Antenna-Switch
PCB and firmware for a ground station UHF antenna switch (between high-power uplink and low-noise downlink, via a single antenna)

TheEinfachFelix/CampPhone
Warum habe ich mich dagegen entschieden, das Sim Modul selber zu implementieren? Ich habe kein Chip gefunden, der günstiger als das fertige Modul war, und ein Datenblatt in Englischer Sprache hat.

sailframes/core
Open-source sailboat racing data logger and analytics platform.



MateoHadzimustafic/VCO
Voltage Controlled Oscillator (Square and Triangle Generator)

yvolodym/18650-3v3-supply
KiCad: stabile 3,3-V-Versorgung aus 18650-Li-Ion-Akku – TP4056-Ladung, DW01A/FS8205A-Schutz, MT3608-Boost, AP2112K-LDO

rekirxs/NeoXalle-PCB-Charger-Master
A full PCB work for a sport sensorial reaction device called NeoXalle.
It measures 103.9 × 77.6 mm and has 4 copper layers, 1.6 mm thick.
61 parts, built around the PAT1220-C-10DB-T5, ESP32-S3-WROOM-1-N8, SIM800C and MT3608. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Ruthvik-reddy-A/PCB-design-projects repository on GitHub, at the commit this page was made from: the board is GPS + GSM Tracker with EEPROM Logging/GPS-GSM Tracker with EEPROM Logging.kicad_pcb and its schematic Breadboard-Power-Supply/BB power supply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Ruthvik-reddy-A before reusing the design.