4 layers109.8 × 145 mm
2 layers58.8 × 51.6 mm
HOPE DawnWave Core
Runcey/HOPE-Fa24-DawnWave- Size
- 58.8 × 51.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 56
- Nets
- 56
- Pads
- 220
- Tracks, vias
- 511, 211
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 25 Oct 2024
- Updated
- 12 Dec 2024
Overview
HOPE DawnWave Core is an open-source printed circuit board by Runcey, from the Runcey/HOPE-Fa24-DawnWave repository on GitHub. It is a 2-layer board of 58.8 × 51.6 mm with 56 parts on 56 nets, routed with 511 tracks and 211 vias.
It is built around the ESP32-C6-WROOM-1-N8, BME688 and TLV62569DRL, with the USBLC6-2P6 among its other parts. Its parts include 13 resistors, 8 capacitors, 5 ICs, 3 connectors and 2 switches. It belongs with the ESP32 and RISC-V boards of this library.
Main components
4
ESP32-C6-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -99.2dBm 2.4GHz 20.5dBm 382mA 3V~3.6V 78mA ESP32-C6 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
BME688
SMD-8P-40℃~+85℃ 0%RH~100%RH 1.71V~3.6V 2.1uA I2C、SPI ±0.5℃ ±3%RH SMD-8P Temperature and Humidity Sensor ROHSBosch SensortecTemperature And Humidity Sensor
TLV62569DRL
SOT-563-40℃~+125℃@(TJ) 1 1.5MHz 2.5V~5.5V 2A 35uA 600mV~5.5V Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Operating status indication Step-down type Yes SOT-563 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
USBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
README
README.mdHOPE-Fa24-DawnWave
Install the Espressif plugin for KiCad!
Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R8, R9 |
| 3 | GND | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | TP10, TP11, TP12 |
| 2 | +3.3V | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | TP2, TP3 |
| 2 | 0.1 µ | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C7, C8 |
| 2 | 0R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R12, R13 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7 |
| 2 | 100n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3, C5 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4 |
| 2 | PU | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2 |
| 1 | +5V | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | TP1 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 10k | Resistor_SMD:R_Cat16-4 | RN1 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 1 | 1uH | Inductor_SMD:L_Coilcraft_XAL4020-XXX | L1 |
| 1 | 210.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 22u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 453k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 634k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | BCLK | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | TP8 |
| 1 | BME688 | Package_LGA:Bosch_LGA-8_3x3mm_P0.8mm_ClockwisePinNumbering | U5 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_B3U-1000P | SW2 |
| 1 | Conn_01x13_Pin | Connector_PinHeader_2.54mm:PinHeader_1x13_P2.54mm_Vertical | J3 |
| 1 | ESP32-C6-WROOM-1 | PCM_Espressif:ESP32-C6-WROOM-1 | U3 |
| 1 | EYE_SPI_DISPLAY_FLIP | Connector_FFC-FPC:Hirose_FH12-18S-0.5SH_1x18-1MP_P0.50mm_Horizontal | X1 |
| 1 | I2S_D | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | TP7 |
| 1 | LRCLK | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | TP9 |
| 1 | LR_SEL | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | JP3 |
| 1 | MAX98357A | Package_DFN_QFN:TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U4 |
| 1 | MONO_SEL | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP5 |
| 1 | NP | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | TP6 |
| 1 | RST | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | SCL0 | TestPoint:TestPoint_Pad_D1.0mm | TP13 |
| 1 | SCL1 | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | TP4 |
| 1 | SDA0 | TestPoint:TestPoint_Pad_D1.0mm | TP14 |
| 1 | SDA1 | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | TP5 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | J2 |
| 1 | TLV62569DRL | Package_TO_SOT_SMD:SOT-563 | U1 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
Similar boards
- 6 layers47.5 × 50 mm
- 4 layers70.3 × 42.8 mm
Gregdavill advent calendar of circuits 2020 esp32s2 breakout
oomlout/oomlout_oomp_project_bot_v_2
722 parts - 4 layers38.4 × 128.5 mm
- 4 layers74 × 41.2 mm
Stm32-netnode
vincerodriguez/stm32-netnode
stm32f407-based network node to report temperature in apartment
84 parts - 2 layers48.2 × 33.5 mm
- 4 layers38.4 × 128.5 mm
Plantpal
rajeev2705/PROJECTS
Welcome to my PCB projects repository! This space is dedicated to documenting my journey in designing, creating, and improving printed circuit boards (PCBs).
127 parts - 4 layers114.9 × 129.9 mm
Tanmatsu
Nicolai-Electronics/tanmatsu-hardware
Hardware design of the Tanmatsu mainboard
372 parts9CERN-OHL-P-2.0
Questions
How big is the HOPE DawnWave Core PCB?
It measures 58.8 × 51.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HOPE DawnWave Core use?
56 parts, built around the ESP32-C6-WROOM-1-N8, BME688, TLV62569DRL and USBLC6-2P6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HOPE DawnWave Core KiCad files?
From the Runcey/HOPE-Fa24-DawnWave repository on GitHub, at the commit this page was made from: the board is HOPE-DawnWave-Core/HOPE-DawnWave-Core.kicad_pcb and its schematic HOPE-DawnWave-BME688/HOPE-DawnWave-BME688.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the HOPE DawnWave Core design in my own project?
Its repository states no licence, so its author keeps all rights: ask Runcey before reusing the design.