
MiPendulo
IznF/Pendulo-Invertido
Repositorio correspondiente al proyecto del pendulo invertido de Izán Fernández Moreno

ROS2 final project PCB is an open-source printed circuit board by RomanMychka, from the RomanMychka/ROS2-exam-project-PCB repository on GitHub. It is a 2-layer board with 36 parts on 60 nets, routed with 555 tracks and 1 via.
It is built around the ROB-14450 and ESP32-DEVKITC-VE. Its parts include 14 connectors, 11 capacitors, 8 ICs, 2 resistors and 1 diode. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 20u | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C6, C7, C10, C11 |
| 4 | 220uF | Capacitor_THT:CP_Radial_D13.0mm_P5.00mm | C4, C5, C8, C9 |
| 4 | Conn_01x04_Pin | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J1, J2, J4, J5 |
| 4 | ROB-14450 | ROB-14450:MODULE_ROB-14450 | U6, U7, U8, U9 |
| 3 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J12, J13, J14 |
| 2 | 10uF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2 |
| 1 | 10К | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 1 | 2200nF | Capacitor_THT:C_Radial_D12.5mm_H20.0mm_P5.00mm | C3 |
| 1 | 560R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | Conn_01x03_Socket | Connector:FanPinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_01x03_Socket | Connector_PinSocket_2.00mm:PinSocket_1x03_P2.00mm_Vertical | J6 |
| 1 | ESP32-DevKitC | PCM_Espressif:ESP32-DevKitC | U3 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | Motor1 | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J7 |
| 1 | Motor2 | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J9 |
| 1 | Motor3 | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J10 |
| 1 | Motor4 | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J8 |
| 1 | ZC323900 | ZC323900:MODULE_ZC323900 | U4 |
| 1 | switch | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J11 |
| 1 | ~ | BMS ROS2 project:Buck convertor | U2 |
| 1 | ~ | BMS ROS2 project:BMS ROS2 project | U1 |

IznF/Pendulo-Invertido
Repositorio correspondiente al proyecto del pendulo invertido de Izán Fernández Moreno

MarcosFontenlos/Inverted_Pendulum
Self-balancing two-wheeled robot built as the final project for the Control Theory course at the Universidade de Santiago de Compostela (2023/2024).



GonzaCerv/noah-hardware
This repo contains all the hardware description for the Noah project. Here lies 3D models, electronics PCB and Firmware software of the robot.

bonavirak/Line-Follower-Robot-Using-STM32F103C8T6-with-TCRT-5000
Line Follower Robot powered by STM32F103C8T6 microcontroller, using TCRT5000 5-way sensors for line detection, HC-05 for Bluetooth communication, TB6612FNG motor driver, and N20 motors (1000 RPM).

0x23/BallJointEmbossingMachine
A motorized linear embossing machine designed to precisely press ball joints. It was designed to automate the production of balljoint linkages for the Open-Micro-Manipulator.

36 parts, built around the ROB-14450 and ESP32-DEVKITC-VE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RomanMychka/ROS2-exam-project-PCB repository on GitHub, at the commit this page was made from: the board is ROS2_final_project_PCB.kicad_pcb and its schematic ROS2_final_project_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask RomanMychka before reusing the design.