

- Size
- 75 × 90 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 32
- Pads
- 94
- Tracks, vias
- 379, 4
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 17 Jun 2026
- Updated
- 19 Jun 2026
Overview
Pendant is an open-source printed circuit board by Rohan317685, from the Rohan317685/hotplate-keychain repository on GitHub, published under the MIT licence. It is a 2-layer board of 75 × 90 mm with 22 parts on 32 nets, routed with 379 tracks and 4 vias.
It is built around the CH224K and SK6812MINI-E. Its parts include 6 capacitors, 4 resistors, 3 ICs, 2 connectors and 1 diode.
Main components
2CH224K
ESSOP-10-150mil-1mm-40℃~+90℃ 100W 4V~30V 5V、9V、12V、15V、20V Overvoltage Protection、Thermal Protection PD 3.0 Power Receiver Controller ESSOP-10-150mil-1mm USB PD ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersSK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
README
README.mdhotplate-keychain
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C2, C3, C4 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | TH1 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 1uF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C6 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
| 1 | 4.7uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C5 |
| 1 | CH224K | Package_SO:SSOP-10-1EP_3.9x4.9mm_P1mm_EP2.1x3.3mm | U2 |
| 1 | Fuse | Fuse:Fuse_Littelfuse_372_D8.50mm | F1 |
| 1 | Heater | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | L78L05_TO92 | Package_TO_SOT_THT:TO-92_Inline | U3 |
| 1 | LOGO | LOGO | G*** |
| 1 | MOUDLE-SEEEDUINO-XIAO | Hackclub footprints:XIAO-Generic-Hybrid-14P-2.54-21X17.8MM | U1 |
| 1 | NMOS | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_MountingHoles | SW1 |
| 1 | SK6812MINI-E | Hackclub footprints:SK6812MINI-E_fixed | D1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
The 21 most common of 22 parts.
Similar boards
- 2 layers440 × 150 mm

- 2 layers355 × 120 mm

- 4 layers560.1 × 158.8 mm

Keyboard
DEV-ajthedj/Keyboard
A custom RGB keyboard that features three 1D capacitive touch sliders, two joysticks, an OLED screen, a fingerprint sensor, and plenty of macro keys!
439 parts - 2 layers78 × 78 mm

- 2 layers45 × 25 mm

Easy PD Sink
openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10
41 parts599 - 4 layers170.2 × 141.9 mm
![[DFR1142]Lite Carrier for LattePanda Mu, the printed circuit board in 3D](/embed/boards/LtBrain/MuBook.jpg?size=s&soon)
[DFR1142]Lite Carrier for LattePanda Mu
LtBrain/MuBook
A x86 carrier board for the LattePanda Mu
308 parts37MIT - 6 layers100 × 120 mm

Astra piNas
jlcjak/astra_piNas
Six-layer CM5 Lite dual-NVMe carrier with PCIe switch, Ethernet, microSD, USB-C PD and PoE. Review design; fabrication hold documented.
176 parts30 - 2 layers29.1 × 45.1 mm

USB GC2
Xenii1642/USB-GC2
Meet the new generation of USB-C GameCube Power Board. Now compatible with both 12V and 15V chargers. Two voltages, twice the potential.
23 parts24CERN-OHL-S-2.0
Questions
How big is the Pendant PCB?
It measures 75 × 90 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pendant use?
22 parts, built around the CH224K and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pendant KiCad files?
From the Rohan317685/hotplate-keychain repository on GitHub, at the commit this page was made from: the board is src/Pendant.kicad_pcb and its schematic src/Pendant.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pendant design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).