2 layers203 × 26.6 mm
2 layers181.5 × 72 mm
SolderingChallenge
RoboticsBrno/RoboCamp-2021🏕️ Webpage with gadgets and manuals for RoboCamp 2021
- Size
- 181.5 × 72 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 54
- Pads
- 164
- Tracks, vias
- 294, 30
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 13 Dec 2020
- Updated
- 1 Mar 2026
Overview
SolderingChallenge is an open-source printed circuit board by RoboticsBrno, from the RoboticsBrno/RoboCamp-2021 repository on GitHub. It is a 2-layer board of 181.5 × 72 mm with 54 parts on 54 nets, routed with 294 tracks and 30 vias.
Its parts include 18 resistors, 12 capacitors, 6 ICs, 6 diodes and 6 connectors. It belongs with the robots and motor control boards of this library.
README
README.mdView this project on CADLAB.io.
RoboCamp-2021
Podklady a web k Robotickému táboru 2021.
K dispozici na 2021.robotickytabor.cz.
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Board | kikit:Board | B0, B1, B2, B3, B4, B5 |
| 6 | USB_A | RoboCamp:usb-PCB | J1, J2, J4, J6, J8, J10 |
| 2 | 100k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3, R18 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R17 |
| 2 | 10n | Capacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C1, C11 |
| 2 | 330R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R16 |
| 2 | 4.7u | Capacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C2, C12 |
| 2 | LED | LED_THT:LED_D5.0mm | D1, D6 |
| 2 | LM555xN | Package_DIP:DIP-8_W7.62mm | U1, U6 |
| 2 | LMC555xMM | Package_SO:VSSOP-8_3.0x3.0mm_P0.65mm | U3, U4 |
| 1 | 100k | Resistor_SMD:R_0201_0603Metric | R15 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R9 |
| 1 | 100k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R6 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 10k | Resistor_SMD:R_0201_0603Metric | R14 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R8 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R5 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C5 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 10n | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C3 |
| 1 | 10n | Capacitor_SMD:C_0201_0603Metric | C9 |
| 1 | 330R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7 |
| 1 | 330R | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R4 |
| 1 | 330R | Resistor_SMD:R_0201_0603Metric | R13 |
| 1 | 330R | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 4.7u | Capacitor_SMD:C_0201_0603Metric | C10 |
| 1 | 4.7u | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C4 |
| 1 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C6 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 1 | LED | LED_SMD:LED_0201_0603Metric | D5 |
| 1 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | LED | LED_SMD:LED_0402_1005Metric | D4 |
| 1 | LMC555xM | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | LMC555xTP | Package_BGA:Texas_DSBGA-8_1.43x1.41mm_Layout3x3_P0.5mm | U5 |
Similar boards
- 2 layers30 × 50 mm
- 2 layers100.1 × 40 mm
32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
54 parts766 - 2 layers100 × 120 mm
- 2 layers
- 2 layers104.3 × 38.9 mm
- 2 layers
- 2 layers93.8 × 64.2 mm
PiFinder smt
brickbots/PiFinder
A plate solving telescope finder based around a Raspberry PI and RPI HQ Camera
54 parts257GPL-3.0
Questions
How big is the SolderingChallenge PCB?
It measures 181.5 × 72 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SolderingChallenge use?
54 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SolderingChallenge KiCad files?
From the RoboticsBrno/RoboCamp-2021 repository on GitHub, at the commit this page was made from: the board is gadgets/solderingChallenge/hardware/solderingChallenge.kicad_pcb and its schematic gadgets/solderingChallenge/hardware/level1-THT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SolderingChallenge design in my own project?
Its repository states no licence, so its author keeps all rights: ask RoboticsBrno before reusing the design.