

LedCube
RGB 9x9x9 Led Cube controlled by FastLED
- Size
- 86 × 46 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 43
- Pads
- 93
- Tracks, vias
- 165, 10
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Sep 2022
- Updated
- 22 Feb 2025
Overview
LedCube is an open-source printed circuit board by RileyCornelius, from the RileyCornelius/LedCube-RGB repository on GitHub, published under the MIT licence. It is a 2-layer board of 86 × 46 mm with 25 parts on 43 nets, routed with 165 tracks and 10 vias.
It is built around the ESP32-DEVKITM-1 and 20021511-00006T4LF. Its parts include 9 resistors, 7 connectors, 2 capacitors, 1 IC and 1 diode. It belongs with the ESP32 boards of this library.
Main components
2README
README.mdLedCube
RGB Led Cube controlled by FastLED

Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 220 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R9 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | Conn_01x03 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J1, J2, J3 |
| 2 | 100uF | Capacitor_THT:C_Radial_D5.0mm_H5.0mm_P2.00mm | C1, C2 |
| 1 | 1N4002 | Diode_THT:D_DO-15_P10.16mm_Horizontal | D1 |
| 1 | COM | Connectors:ESP_PROG_COM | J5 |
| 1 | Conn_01x02 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | Conn_01x04 | Connectors:Grove_1x04 | J4 |
| 1 | ESP32-DevKitM | Espressif:ESP32-DevKitM | U3 |
| 1 | JTAG | Connectors:ESP_PROG_JTAG | J7 |
| 1 | LOGO | LOGO | G*** |
Similar boards
- 2 layers67.3 × 74.9 mm

- 4 layers95 × 76.2 mm

- 2 layers241.5 × 321.5 mm

Map board
axlan/pcb-map
PCB designs, firmware, and host SW for controlling an interactive map printed onto a PCB board.
11 parts11 - 2 layers68.7 × 100 mm

Bsides perth 2025
badges4dotcom/bsidesperth2025badge
Instructions on how to assemble the physical badge can be found here
15 parts5 - 2 layers78 × 622 mm

- 2 layers118 × 70 mm

ESP32SmartBoard PCB
ronaldsieber/ESP32SmartBoard_PCB
KiCad project of a Printed Cuircit Board (PCB) for ESP32 with Temperature/Humidity/CO2 Sensors, User LEDs and Buttons
36 parts4MIT - 2 layers33 × 70 mm

Edifier remote
cristianghsandu/edifier-remote
An ESP32 based IR signals translator to use the LG Magic remote to control the volume on an Edifier 2.1 system
9 parts2 - 2 layers105.6 × 72 mm

Solar mppt charge controller
Pendu1699/solar-mppt-charge-controller
ESP32-based solar MPPT charge controller, custom PCB, perturb & observe tracking algorithm, logged efficiency test data.
25 parts2MIT
Questions
How big is the LedCube PCB?
It measures 86 × 46 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LedCube use?
25 parts, built around the ESP32-DEVKITM-1 and 20021511-00006T4LF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LedCube KiCad files?
From the RileyCornelius/LedCube-RGB repository on GitHub, at the commit this page was made from: the board is electronics/kicad/LedCube/LedCube.kicad_pcb and its schematic electronics/kicad/LedCube/LedCube.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LedCube design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).