Skip to the content
2 layers33 × 70 mmEdifier remote, the printed circuit board in 3D

An ESP32 based IR signals translator to use the LG Magic remote to control the volume on an Edifier 2.1 system

Size
33 × 70 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
37
Pads
47
Tracks, vias
24, 0
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
7 May 2020
Updated
1 Oct 2021

Overview

Edifier remote is an open-source printed circuit board by cristianghsandu, from the cristianghsandu/edifier-remote repository on GitHub. It is a 2-layer board of 33 × 70 mm with 9 parts on 37 nets, routed with 24 tracks and 0 vias.

It is built around the ESP32-DEVKITM-1. Its parts include 1 diode and 1 transistor. It belongs with the ESP32 boards of this library.

Main components

1

README

README.md

edifier-remote

An ESP32 based IR signals translator to use the LG Magic remote to control the volume on an Edifier 2.1 system

Parts

9
QtyValueFootprintReferences
3MountingHole_3.2mm_M3MountingHole:MountingHole_3.2mm_M31, 2, 3
1BoardCutoutESP32:BoardCutoutCUT
1ESP32_DevKitESP32:ESP32_DevKit_36PINESP32
1LEDLED_THT:LED_D5.0mmD1
1LOGOLogo:LogoG***
1Q_NPN_BCEPackage_TO_SOT_THT:TO-220-3_VerticalQ1
1TSOP43xxOptoDevice:Vishay_MOLD-3PinIR_Recv1

Similar boards

  • 2 layers67.3 × 74.9 mmEasysdr, the printed circuit board in 3D

    Easysdr

    michalin/easysdr

    Super Simple SDR Receiver

    140 parts115GPL-3.0
  • 4 layers95 × 76.2 mmDeWille Control, the printed circuit board in 3D

    DeWille Control

    zmeiresearch/DeWille

    A high-performance DIY audio DAC

    171 parts23
  • 2 layers241.5 × 321.5 mmMap board, the printed circuit board in 3D

    Map board

    axlan/pcb-map

    PCB designs, firmware, and host SW for controlling an interactive map printed onto a PCB board.

    11 parts11
  • 2 layers68.7 × 100 mmBsides perth 2025, the printed circuit board in 3D

    Bsides perth 2025

    badges4dotcom/bsidesperth2025badge

    Instructions on how to assemble the physical badge can be found here

    15 parts5
  • 2 layers78 × 622 mmBt trx dev board, the printed circuit board in 3D

    Bt trx dev board

    bt-trx/dev-board

    Hardware repo for the bt-trx development board

    59 parts4
  • 2 layers118 × 70 mmESP32SmartBoard PCB, the printed circuit board in 3D

    ESP32SmartBoard PCB

    ronaldsieber/ESP32SmartBoard_PCB

    KiCad project of a Printed Cuircit Board (PCB) for ESP32 with Temperature/Humidity/CO2 Sensors, User LEDs and Buttons

    36 parts4MIT
  • 2 layers105.6 × 72 mmSolar mppt charge controller, the printed circuit board in 3D

    Solar mppt charge controller

    Pendu1699/solar-mppt-charge-controller

    ESP32-based solar MPPT charge controller, custom PCB, perturb & observe tracking algorithm, logged efficiency test data.

    25 parts2MIT
  • 2 layers59.1 × 101.4 mmFlight computer, the printed circuit board in 3D

    Flight computer

    nakujaproject/N3FlightComputer-PCB

    Electrical schematics and PCB for N3 flight computer

    48 parts1MIT

Questions

How big is the Edifier remote PCB?

It measures 33 × 70 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Edifier remote use?

9 parts, built around the ESP32-DEVKITM-1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Edifier remote KiCad files?

From the cristianghsandu/edifier-remote repository on GitHub, at the commit this page was made from: the board is pcb/Edifier_Remote/Edifier_Remote.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Edifier remote design in my own project?

Its repository states no licence, so its author keeps all rights: ask cristianghsandu before reusing the design.