Skip to the content
2 layers32.1 × 20.4 mmPowerBank, the printed circuit board in 3D

Im making a powerbank out of 18650 batteries.

Size
32.1 × 20.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
18
Nets
15
Pads
69
Tracks, vias
87, 12
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
5 Mar 2026
Updated
4 Apr 2026

Overview

PowerBank is an open-source printed circuit board by Ricsikeee17, from the Ricsikeee17/PowerBank repository on GitHub, published under the MPL-2.0 licence. It is a 2-layer board of 32.1 × 20.4 mm with 18 parts on 15 nets, routed with 87 tracks and 12 vias.

It is built around the IP5306. Its parts include 5 capacitors, 5 resistors, 3 diodes, 1 IC and 1 connector. It belongs with the power boards of this library.

Main components

1

README

README.md

Custom PowerBank

This is a custom made powerbank from scratch that will use 18650 batteries from a laptop battery. I made this because I had some laying 18650 batteries and I need a powerbank for my phone because I doesn't hold the charge through the day. It will have one USB C port to charge itself and your phone.

PCB

I made the PCB with KiCAD and here's some screenshot of the schematic and the PCB: image image

CAD Model

The CAD model was made in Shapr3D it's fully 3D printable. It's only 2 parts and I think I will glue the together when assembling it.

A screenshot: {5D32E746-1B3C-468F-AC42-E1E89CABE559}

Parts

18
QtyValueFootprintReferences
5C_SmallCapacitor_SMD:C_0805_2012MetricC1, C2, C3, C4, C5
5ResistorResistor_SMD:R_0805_2012MetricR1, R2, R3, R4, R5
3LEDLED_SMD:LED_1206_3216MetricD1, D2, D3
1IP5306IP5306:SOP127P600X165-9NU1
1L_SmallInductor_SMD:L_Vishay_IHLP-1616L1
1MountingHole_PadMountingHole:BATT+_MOUNTING_HOLEH1
1MountingHole_PadMountingHole:BATT-_MOUNTING_HOLEH2
1USB_C_Receptacle_PowerOnly_24PConnector_USB:USB_C_Receptacle_Amphenol_12401610E4-2A_CircularHolesJ1

Similar boards

  • 2 layers95.3 × 161.9 mmDfh badge, the printed circuit board in 3D

    Dfh badge

    tanaes/whopping_Voron_mods

    135 parts787GPL-3.0
  • 2 layers100.8 × 30.2 mmEsp32 loraprs c3, the printed circuit board in 3D

    Esp32 loraprs c3

    sh123/esp32_loraprs

    LoRa ESP32 KISS Bluetooth modem (for APRSDroid or aprs.fi iOS) + APRS-IS RX/TX iGate over WiFi + Digipeater + DV (with Codec2 Walkie-Talkie)

    29 parts281GPL-3.0
  • 2 layers87.9 × 98.7 mmBitdoglab smd, the printed circuit board in 3D

    Bitdoglab smd

    BitDogLab/BitDogLab

    Open-source educational hardware for embedded systems, programming, electronics, and physical computing.

    138 parts203
  • 2 layers27.5 × 32 mmFunHomeSwitch, the printed circuit board in 3D

    FunHomeSwitch

    ZhiFun/FunHome

    DIY design of smart home hardware based on Home Assistant.

    41 parts29MIT
  • 2 layers54.7 × 74.3 mmEcn, the printed circuit board in 3D

    Ecn

    leon-uhs/ESP32-RF-Development-Board

    esp32-pico-d4、cc1101、nrf24、sd、ip5306

    67 parts8
  • 2 layers86 × 136 mmOpen pocket, the printed circuit board in 3D

    Open pocket

    LakoMoor/open-pocket-gbc

    Game Boy / Game Boy Color on the Sipeed Tang Nano 20K: HDMI, Pocket-style menu, ST7735 LCD, USB remote. Open-source FPGA toolchain only.

    58 parts4GPL-3.0
  • 2 layers103.5 × 41.4 mmABD v01, the printed circuit board in 3D

    ABD v01

    ampnics/AmpBatt-Dock-2p

    Open-source 2P 18650 power bank hardware by Ampnics.

    28 parts2
  • 2 layers188.5 × 88.9 mmEsp gamepad v2, the printed circuit board in 3D

    Esp gamepad v2

    Reiko0908/NeuralNetwork_Based_AutonomousCar

    This project focuses on developing an autonomous car system powered by neural networks (NN). It utilizes deep learning techniques to enable key functionalities such as perception, path planning, and control.

    70 parts2Apache-2.0

Questions

How big is the PowerBank PCB?

It measures 32.1 × 20.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PowerBank use?

18 parts, built around the IP5306. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PowerBank KiCad files?

From the Ricsikeee17/PowerBank repository on GitHub, at the commit this page was made from: the board is PCB/PowerBank.kicad_pcb and its schematic PCB/PowerBank.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PowerBank design in my own project?

Its repository publishes it under the MPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).