
DayClock Circuit
Rich-Nelson/day-cycle-clock
This repository contains the mechanical and electrical CAD for the Day Cycle Clock. The code can be found in this repo https://github.com/Rich-Nelson/day-cycle-clock-code

This repository contains the mechanical and electrical CAD for the Day Cycle Clock. The code can be found in this repo https://github.com/Rich-Nelson/day-cycle-clock-code
Backlight is an open-source printed circuit board by Rich-Nelson, from the Rich-Nelson/day-cycle-clock repository on GitHub. It is a 2-layer board of 27.9 × 30.5 mm with 52 parts on 27 nets, routed with 75 tracks and 25 vias.
Its parts include 25 resistors, 25 diodes and 2 connectors.
This repository contains the mechanical and electrical CAD for the Day Cycle Clock. The code can be found in this repo https://github.com/Rich-Nelson/day-cycle-clock-code
Links to the build video and blog post coming soon.
Contains the mechanical models. In the root directoy there is a .STEP and .SLDASM of the full assembly
Contains the KiCAD PCB files and Gerbers.
Note I may need to update some customer libraries into this repo so that the KiCAD project will load properly on other computers. But for now the gerbers are available to make your own boards.
Contains the vector outlines used for the 3 cutout layers.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | LED | LEDs:LED_0805 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +9 |
| 25 | R | Resistor_SMD:R_0805_2012Metric | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +9 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2 |

Rich-Nelson/day-cycle-clock
This repository contains the mechanical and electrical CAD for the Day Cycle Clock. The code can be found in this repo https://github.com/Rich-Nelson/day-cycle-clock-code

conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style

sudomesh/disaster-radio
A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.

Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.

karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix


StuckAtPrototype/AirCube
Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.

Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)

loxodes/vna
Under development open hardware microwave vector network analyzer
It measures 27.9 × 30.5 mm and has 2 copper layers, 1.6 mm thick.
52 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Rich-Nelson/day-cycle-clock repository on GitHub, at the commit this page was made from: the board is PCB/Backlight/Backlight/Backlight.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Rich-Nelson before reusing the design.