Skip to the content
2 layers61 × 36.8 mmPositive Power Distribution, the printed circuit board in 3D

Positive Power Distribution

RiceAMO/HDD_Shutter_Driver

HDD shutter driver circuit.

Size
61 × 36.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
3
Pads
41
Tracks, vias
17, 0
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
1 Dec 2017
Updated
11 Feb 2018

Overview

Positive Power Distribution is an open-source printed circuit board by RiceAMO, from the RiceAMO/HDD_Shutter_Driver repository on GitHub, published under the MIT licence. It is a 2-layer board of 61 × 36.8 mm with 22 parts on 3 nets, routed with 17 tracks and 0 vias.

Its parts include 11 connectors, 4 capacitors, 2 diodes and 1 IC.

README

README.md

HDD_Shutter_Driver

HDD shutter driver circuit based on Rob Scholten's 2007 RSI paper (see below). Modifications include the option of using an IXYS IXDF604PI (about $2/IC) instead of the TI LMD18200 (about $17/IC) to drive the shutter.

Notes

  • Outputs are to standard BNC connectors so care should be taken to avoid shorting to ground.
  • H3 (PWR_SEL) allows using a single voltage supply to power the IC and provide current for the shutter.
  • H1 and H2 allow the selection of the output polarity (OUT_1x when using the IXDF604PI, OUT_2x when using LMD18200).

Ordering

Shutter Driver

The main circuit for driving HDD shutters.

Power Distribution

Circuit used to breakout a power supply for multiple shutter driver boards.

Original paper

Enhanced laser shutter using a hard disk drive rotary voice-coil actuator

R. E. Scholten

Review of Scientific Instruments 78, 026101 (2007)

https://doi.org/10.1063/1.2437199

Also see

Parts

22
QtyValueFootprintReferences
10OUTSockets_MOLEX_KK-System:Socket_MOLEX-KK-RM2-54mm_Lock_2pin_straightP2, P3, P4, P5, P6, P7, P8, P9, P10, P11
21N4004Diodes_ThroughHole:D_DO-41_SOD81_P10.16mm_HorizontalD1, D2
2CCapacitors_ThroughHole:C_Disc_D5.0mm_W2.5mm_P5.00mmC2, C3
1CP1Capacitors_ThroughHole:CP_Radial_D10.0mm_P5.00mmC1
1CP1Capacitors_ThroughHole:CP_Radial_D5.0mm_P2.00mmC4
1INSockets_MOLEX_KK-System:Socket_MOLEX-KK-RM2-54mm_Lock_2pin_straightP1
1LM78xxPower_Integrations:TO-220U1

The 18 most common of 22 parts.

More from RiceAMO/HDD_Shutter_Driver

1
  • 2 layers66 × 66 mmShutter Driver, the printed circuit board in 3D

    Shutter Driver

    RiceAMO/HDD_Shutter_Driver

    HDD shutter driver circuit.

    26 partsMIT

Similar boards

  • 2 layers158 × 11 mmDaylight Matchstick, the printed circuit board in 3D

    Daylight Matchstick

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    22 parts1.1kGPL-3.0
  • 2 layers57 × 65 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    22 parts1kGPL-3.0
  • 2 layers81 × 57.2 mmRP2040-Macropad, the printed circuit board in 3D

    RP2040-Macropad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    22 parts915
  • 2 layers54.6 × 70.9 mmBeagleLogic Cape, the printed circuit board in 3D

    BeagleLogic Cape

    abhishek-kakkar/BeagleLogic

    A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.

    22 parts479GPL-3.0
  • 2 layers66.4 × 24.5 mmConnecting piece, the printed circuit board in 3D

    Connecting piece

    Chrismettal/flipper-zero-backpacks

    Backpack-style addon boards for the Flipper Zero!

    22 parts456
  • 2 layers51 × 70 mmDMG A04-01, the printed circuit board in 3D

    DMG A04-01

    HDR/NintendoPCBs

    Replacement pcb's for Nintendo games.

    22 parts321
  • 2 layers27.8 × 16 mmSpi 1v8 level shifter, the printed circuit board in 3D

    Spi 1v8 level shifter

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    22 parts253GPL-3.0

Questions

How big is the Positive Power Distribution PCB?

It measures 61 × 36.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Positive Power Distribution use?

22 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Positive Power Distribution KiCad files?

From the RiceAMO/HDD_Shutter_Driver repository on GitHub, at the commit this page was made from: the board is Positive_Power_Distribution/Positive_Power_Distribution.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Positive Power Distribution design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).