Renbrant/MeshCrossway24MeshCrossway is an open-source, ESP32-based portable communicator designed to connect travelers and search-and-rescue teams across Meshtastic and MeshCore networks in parallel, with dedicated LoRa radios, a touchscreen interface, GNSS positioning, and offline messaging.
MeshCrossway RevA LAYOUT A is an open-source printed circuit board by Renbrant, from the Renbrant/MeshCrossway repository on GitHub, published under the MIT licence. It is a 4-layer board of 160 × 94 mm with 39 parts on 27 nets, routed with 151 tracks and 98 vias.
Its parts include 10 capacitors, 7 resistors, 4 ICs, 2 diodes and 2 connectors. It belongs with the radio and wireless boards of this library.
The MeshCrossway Rev A schematic is shared by multiple PCB floorplans.
Status: preserved alternative.
The earlier engineering layout explored a wider 4-layer carrier with the radios on opposite sides and GNSS separated from the radio power section. It is retained as a reference, not the active direction.
Status: active.
Layout B starts from a blank PCB and targets a 2-layer carrier:
When alternative PCB files are added here, keep their names explicit:
MeshCrossway_RevA_LAYOUT_A.kicad_pcb
MeshCrossway_RevA_LAYOUT_B.kicad_pcbDo not create separate schematics for the alternatives unless the electrical design itself changes.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 47R | MeshCrossway:R/C_0603 | R1, R2, R3, R4 |
| 3 | 100nF | MeshCrossway:R/C_0603 | C1, C5, C9 |
| 3 | 10uF | MeshCrossway:C_0805 | C2, C6, C10 |
| 2 | 100uF DNP | MeshCrossway:C_1210 | C4, C8 |
| 2 | 4.7k DNP | MeshCrossway:R/C_0603 | R6, R7 |
| 2 | 47uF DNP | MeshCrossway:C_1210 | C3, C7 |
| 2 | Schottky | MeshCrossway:D_SOD-123 | D1, D2 |
| 2 | XIAO + Wio-SX1262 socket | MeshCrossway:Module_XIAO_ESP32S3_WioSX1262_Socket | U2, U3 |
| 1 | 0R | MeshCrossway:R/C_0603 | R5 |
| 1 | 5V_J8 | TestPoint:TestPoint_Pad_D2.0mm | TP1 |
| 1 | 5V_LOC | TestPoint:TestPoint_Pad_D2.0mm | TP2 |
| 1 | A CURRENT LINK | PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | A POWER SELECT | PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | A_3V3 | TestPoint:TestPoint_Pad_D2.0mm | TP9 |
| 1 | B CURRENT LINK | PinHeader_1x02_P2.54mm_Vertical | JP4 |
| 1 | B POWER SELECT | PinHeader_1x03_P2.54mm_Vertical | JP3 |
| 1 | B_3V3 | TestPoint:TestPoint_Pad_D2.0mm | TP10 |
| 1 | HOST DEBUG | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | LOCAL 5V MODULE TBD | MeshCrossway:Module_LOCAL_5V_3Pin_Prototype | U1 |
| 1 | MC_RX | TestPoint:TestPoint_Pad_D2.0mm | TP8 |
| 1 | MC_TX | TestPoint:TestPoint_Pad_D2.0mm | TP7 |
| 1 | MT_RX | TestPoint:TestPoint_Pad_D2.0mm | TP6 |
| 1 | MT_TX | TestPoint:TestPoint_Pad_D2.0mm | TP5 |
| 1 | RAD_A_5V | TestPoint:TestPoint_Pad_D2.0mm | TP3 |
| 1 | RAD_B_5V | TestPoint:TestPoint_Pad_D2.0mm | TP4 |
| 1 | Uputronics MAX-M10S 3V (MECH VERIFY) | MeshCrossway:Module_Uputronics_MAX_M10S_3V_MECH_APPROX | U4 |
| 1 | Waveshare J8 mating 2x16 | MeshCrossway:Waveshare_J8_Mating_2x16_P2.54mm | J1 |
Renbrant/MeshCrossway
MeshCrossway is an open-source, ESP32-based portable communicator designed to connect travelers and search-and-rescue teams across Meshtastic and MeshCore networks in parallel, with dedicated LoRa radios, a touchscreen…
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.
i2cjak/Framework_Expansion_Cards
In which i2cjak creates a new expansion card design every day until he is given a NICE Framework laptop
OpenServoCore/open-servo-core
The goal of this project is to create an open servo controller board and firmware.
axiometa/BrodBoost-PD
Breadboard Powersupply with Power Delivery. Available Voltages 20,15,12,9,5. Based on CYPD3177 Chip
festlv/mso5000-logic-probe
Cheap logic probe for Rigol MSO5000-series oscilloscopes
oresat/oresat-gps-hardware
Hardware for OreSat's SDR GPS receive and other SDR GPS projects
It measures 160 × 94 mm and has 4 copper layers, 1.6 mm thick.
39 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Renbrant/MeshCrossway repository on GitHub, at the commit this page was made from: the board is hardware/kicad/layouts/MeshCrossway_RevA_LAYOUT_A.kicad_pcb and its schematic hardware/kicad/MeshCrossway_RevA.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).