
ESP32
KirtiChickamath/ESP32-IoT-sensor-board
ESP32- IoT sensor board. 4-layer PCB, designed in KiCad . Features LiPo charging, USB-C, SPI flash, SD card, BME280, and more.

ESP32-C3 based PCB design developed using KiCad 9
KiCad 9 Esp32 Project is an open-source printed circuit board by RatnakarSahooVSSUT, from the RatnakarSahooVSSUT/ESP32-Sensor-Board repository on GitHub. It is a 4-layer board of 87 × 55 mm with 87 parts on 76 nets, routed with 729 tracks and 144 vias.
It is built around the ESP32-C3-WROOM-02-H4, MCP73871EV and BME280, with the MAX4466EXK+T, W25Q32JVSSIQ and GSD090012SEU among its other parts. Its parts include 32 resistors, 22 capacitors, 7 ICs, 6 diodes and 5 connectors. It belongs with the ESP32 and RISC-V boards of this library.
A custom ESP32-C3 based sensor and embedded systems development board designed in KiCad 9.
Custom ESP32-C3 Sensor & Embedded Systems Development Board
The ESP32-Sensor-Board is a custom embedded systems development board built around the ESP32-C3 microcontroller.
The board integrates environmental sensing, sound sensing, USB connectivity, battery charging, power regulation, user-interface controls, and external expansion interfaces into a single compact PCB.
The complete hardware design was developed in KiCad 9, including schematic capture, hierarchical design, PCB layout, 3D visualization, custom libraries, DFM analysis, and manufacturing outputs.
| Component / Feature | Description |
|---|---|
| Microcontroller | ESP32-C3 |
| Environmental Sensor | BME280 |
| Sound Sensing | On-board sound sensing circuit |
| USB | USB connectivity |
| Power Input | USB / Rechargeable Battery |
| Battery Charging | Li-ion/Li-Po charging circuit |
| Regulation | On-board voltage regulation |
| Communication | I2C / SPI |
| Expansion | GPIO headers |
| Debugging | Test points |
| PCB Design | KiCad 9 |
The design follows a hierarchical schematic structure, separating the major functional blocks into dedicated schematic sheets.
The sensor subsystem includes the BME280 environmental sensor.
The BME280 provides digital measurements of:
The sensor communicates with the ESP32-C3 through a digital interface.
An on-board sound sensing circuit is also included for detecting variations in ambient sound.
Potential applications include:
The power subsystem manages the board's power input, battery charging, voltage regulation, and status indication.
The design includes:
The board provides several controls and indicators for development, debugging, and normal operation.
The PCB was designed using KiCad 9 with emphasis on:
USB connectivity is provided for:
The I2C interface allows additional sensors and peripherals to be connected to the board.
SPI connectivity is available for peripherals requiring higher-speed communication, such as displays, memory devices, and other external modules.
Additional GPIO pins are exposed through board headers for connecting external sensors, modules, and other peripherals.
Dedicated test points are provided across the board to make hardware bring-up, debugging, and signal verification easier.
These can be used with a:
Manufacturing files are provided in the:
ESP32_Gerbers/
directory.
The repository contains the generated Gerber and drill files required for PCB fabrication.
DFM-related manufacturing files are also included under:
dfm/gerber/
ESP32-Sensor-Board/
│
├── ESP32_Gerbers/
│ └── Gerber & drill files
│
├── Libraries/
│ └── Custom KiCad symbols & footprints
│
├── dfm/
│ └── gerber/
│ └── DFM / manufacturing files
│
├── images/
│ ├── ESP32-Schematic.png
│ ├── PCB-3d-front.png
│ ├── PCB-layout.png
│ ├── Power-section-Schematic.png
│ ├── Sensor-Section.png
│ └── User-interface.png
│
├── KiCad 9 Esp32 Project.kicad_pro
├── KiCad 9 Esp32 Project.kicad_sch
├── KiCad 9 Esp32 Project.kicad_pcb
│| Design Stage | Status |
|---|---|
| Schematic Design | ✅ Completed |
| Hierarchical Schematic | ✅ Completed |
| Sensor Integration | ✅ Completed |
| Power Management | ✅ Completed |
| PCB Layout | ✅ Completed |
| 3D PCB Design | ✅ Completed |
| Custom Libraries | ✅ Completed |
| Gerber Generation | ✅ Completed |
| DFM Analysis | ✅ Completed |
| Hardware Fabrication | 🔄 To be updated |
The complete KiCad project files are included in this repository.
The project can be opened and further modified using KiCad 9.
The repository includes:
Ratnakar Sahoo
Embedded Systems & PCB Design
This project is provided for educational and development purposes.
Please refer to the repository contents for the applicable design and manufacturing files.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C1, C2, C5, C8, C10, C13, C14, C15, C16, C18, C20, C21 |
| 6 | 470 | Resistor_SMD:R_0805_2012Metric | R7, R8, R9, R10, R14, R18 |
| 5 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R32, R33, R34 |
| 4 | 10u | Footprints:T491A | C3, C4, C7, C12 |
| 4 | 50 | Resistor_SMD:R_0805_2012Metric | R15, R16, R20, R22 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric | R19, R23, R30 |
| 3 | 1u | Capacitor_SMD:C_0805_2012Metric | C6, C19, C22 |
| 3 | LTST-C170KRKT | Footprints:LEDC2012X120N | LED1, LED4, LED6 |
| 2 | 1M | Resistor_SMD:R_0805_2012Metric | R27, R29 |
| 2 | 2K | Resistor_SMD:R_0805_2012Metric | R26, R28 |
| 2 | 4K7 | Resistor_SMD:R_0805_2012Metric | R24, R25 |
| 2 | 5k1 | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | LTST-C170GKT | Footprints:LEDC2012X120N | LED2, LED5 |
| 1 | 0ZCH0110AF2E | Footprints:FUSC3226X100N | F1 |
| 1 | 100K | Resistor_SMD:R_0805_2012Metric | R31 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric | C17 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 1U | Capacitor_SMD:C_0805_2012Metric | C11 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 22K1 | Resistor_SMD:R_0805_2012Metric | R12 |
| 1 | 2k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 4.7u | Footprints:T491A | C9 |
| 1 | 47K5 | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | B2B-PH-SM4-TB | Footprints:JST_B2B-PH-SM4-TB | J2 |
| 1 | BME280 | Footprints:PSON65P250X250X100-8N | U2 |
| 1 | Boot | Footprints:SW_USLPT2819DT2TR | S1 |
| 1 | CMC-5042PF-AC | Footprints:CUI_CMC-5042PF-AC | MK1 |
| 1 | CP2102N-Axx-xQFN20 | Package_DFN_QFN:SiliconLabs_QFN-20-1EP_3x3mm_P0.5mm_EP1.8x1.8mm | U4 |
| 1 | Conn_01x04_Pin | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J4 |
| 1 | Conn_01x05_Pin | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J5 |
| 1 | ESP32-C3-WROOM-02-H4 | Footprints:MODULE_ESP32-C3-WROOM-02-H4 | U3 |
| 1 | GSD090012SEU | Footprints:AMPHENOL_GSD090012SEU | J3 |
| 1 | LM1117MPX-3.3 | Footprints:VREG_LM1117MPX-3.3 | VR1 |
| 1 | LTST-C170TBKT | Footprints:LEDC2012X120N | LED3 |
| 1 | MAX4466EXK | Footprints:SOT65P210X110-5N | U7 |
| 1 | MCP73871 | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U1 |
| 1 | Reset | Footprints:SW_USLPT2819DT2TR | S2 |
| 1 | SS-52400-002 | Footprints:BELFUSE_SS-52400-002 | J1 |
| 1 | TEMT6000X01 | Footprints:TRANS_TEMT6000X01 | Q1 |
| 1 | Test CS | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | Test CS_SD | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | Test MISO | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | Test MOSI | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | Test SCLK | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U5 |
| 1 | W25Q32JVSSIQ | Footprints:SOIC127P790X216-8N | U6 |
The 85 most common of 87 parts.

KirtiChickamath/ESP32-IoT-sensor-board
ESP32- IoT sensor board. 4-layer PCB, designed in KiCad . Features LiPo charging, USB-C, SPI flash, SD card, BME280, and more.

ddennis18/ESP32-IoT-DevBoard
An ESP32-C3 based IoT controller board designed in KiCad. The board combines wireless control, sensor interfaces, local storage, audio/light sensing, USB connectivity, and single-cell Li-ion battery support on a compact…

kaushal1020/esp32-c3-02-KiCAD-Design
A custom ESP32-C3-02 Development Board designed from scratch using KiCad. This repository contains the complete hardware design, including schematic, PCB layout, and supporting files for manufacturing and development.

YUKESH0620/ESP32-C3-Sensor-PCB
This repository contains the complete hardware design of a custom ESP32-C3 based Smart Sensor Board, including schematics, PCB layout, and documentation.

Asaf66/ESP32-IoT-Sensor-Hub-Manufacturing-Ready-
hardware system based on ESP32-C3 (RISC-V architecture) on a 4-layer PCB for noise immunity. The project includes sensors (environment, light, and sound), smart power and charging management (MCP73871), and a user…

chopda15/ESP32-sensor-board
Custom-designed ESP32-C3 IoT PCB with integrated Li-ion charging, environmental sensing, data logging, USB-C connectivity, and power-efficient embedded system architecture.


It measures 87 × 55 mm and has 4 copper layers, 1.6 mm thick.
87 parts, built around the ESP32-C3-WROOM-02-H4, MCP73871EV, BME280 and MAX4466EXK+T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RatnakarSahooVSSUT/ESP32-Sensor-Board repository on GitHub, at the commit this page was made from: the board is KiCad 9 Esp32 Project.kicad_pcb and its schematic KiCad 9 Esp32 Project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask RatnakarSahooVSSUT before reusing the design.