Skip to the content
2 layers395.7 × 137.5 mmMyKeeb, the printed circuit board in 3D

This repository is for a custom keyboard I am making with custom keycaps, case, and things I like being integrated into the design of the keyboard

Size
395.7 × 137.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
175
Nets
117
Pads
639
Tracks, vias
699, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
29 Jun 2026
Updated
28 Jul 2026

Overview

MyKeeb is an open-source printed circuit board by Random1011010, from the Random1011010/My-Cool-Keeb repository on GitHub. It is a 2-layer board of 395.7 × 137.5 mm with 175 parts on 117 nets, routed with 699 tracks and 0 vias.

Its parts include 85 switches and 83 diodes. It belongs with the RP2040 boards of this library.

README

README.md

My-Cool-Keeb

Name: Morning Star

Morning Star is a custom 81-key mechanical keyboard powered by the Hack Club Orpheus Pico (RP2040). Built with dual rotary encoders, ultra-quiet linear switches, and a custom 2-layer PCB inside a 3D-printed enclosure, it delivers a high-functionality, low-noise typing experience.

Screenshot 2026-07-28 at 3 13 28 PM

🛠️ Project Writeup

What I Built

Morning Star is a custom-designed, 81-key mechanical keyboard featuring a dedicated function row, arrow cluster, and dual EC11 rotary encoders.

  • Microcontroller: Powered by the Hack Club Orpheus Pico (RP2040).
  • Sound Profile: Engineered for silent operation using Outemu Silent White linear switches, blank MOA profile PBT keycaps, and pre-clipped Chosfox V3 plate-mount stabilizers.
  • PCB & Hardware: Custom 2-layer PCB designed, housed in a 3D-printed enclosure held together with M3 brass heat-set inserts and stainless steel hex socket screws.

Why I Built It

Standard off-the-shelf mechanical keyboards are often either too noisy for shared environments or lack the physical control density needed for media editing, live sound workflows, and rapid navigation.

I wanted to design a custom board from scratch that solved these problems:

  1. Dual Encoder Control: Placing two tactile knobs directly on the layout gives instant physical control over volume, timeline scrubbing, and macro adjustments without leaving the home row.
  2. Silent Treatment: By choosing silent white linear switches and plate-mounted stabilizers with pre-clipped stems, I wanted to eliminate rattle and any noise (I study at night so I would get in trouble if it was loud).

What I Learned

Building Morning Star involved learning hardware production, PCB fabrication constraints, and firmware matrix logic:

  • PCB Manufacturing & Cost Optimization: I learned how small design decisions directly impact manufacturing price. By selecting "Tented" via covering, I eliminated extra processing surcharges on JLCPCB while keeping standard matrix routing intact.
  • Hardware Sourcing & Budgeting: Balancing component lead times and shipping fees taught me how to structure a realistic Bill of Materials across multiple suppliers (AliExpress, Amazon, JLCPCB) while staying strictly within budget limits.
  • Mechanical Design & Fasteners: I learned why direct-threading screws into 3D-printed plastic leads to stripped threads over time, and how using a soldering iron to melt brass heat-set inserts into internal bosses provides strong, long-lasting metal threads for continuous teardowns.
  • Matrix Logic & Firmware: I gained experience configuring diode-isolated key matrices (1N4148 diodes) to ensure full N-Key Rollover (NKRO) without ghosting, as well as mapping quadrature encoder signals to GPIO pins on the RP2040.

📋 Bill of Materials (BOM)

Part DescriptionQtyUnit Cost (USD)Total Cost (USD)Source / Link
Orpheus Pico Microcontroller1$0.00$0.00Hack Club GitHub
Outemu Silent White Linear Switches (90 pcs)90$0.27$23.90AliExpress
132-Key White Blank MOA Profile Keycaps1$20.96$20.96AliExpress
1N4148 Signal Diodes (100-pack)100$0.016$1.64AliExpress
EC11 20mm Rotary Encoders (2-pack)1$3.50$3.50AliExpress
M3 x 20mm Stainless Steel Screws (100-pack)100$0.052$5.22AliExpress
HANGLIFE M3 Brass Heat-Set Inserts (100-pack)100$0.057$5.66Amazon Canada
Chosfox V3 Plate Mount Stabilizers Kit1$8.57$8.57AliExpress
Custom 2-Layer PCB Fabrication (5 pcs total)1$58.85$58.85JLCPCB
Total Estimated Cost~$128.30 USD

🛠️ Hardware Specifications

  • MCU: Hack Club Orpheus Pico (RP2040)
  • Matrix Architecture
  • Encoders: 2x EC11 5-pin encoders connected to dedicated GPIO channels.
  • Enclosure Fasteners: M3 x D5 x L4 mm brass heat-set inserts with M3 x 20mm.
  • Stabilizers: Chosfox V3 plate-mount stabilizers for keycaps ≥ 2u.

Parts

175
QtyValueFootprintReferences
831N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +67
73SW_PushPCM_marbastlib-mx:SW_MX_1uSW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24 +57
6MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4, H5, H6
3SW_PushPCM_marbastlib-mx:SW_MX_1.5uSW1, SW30, SW31
3SW_PushPCM_marbastlib-mx:SW_MX_1.25uSW69, SW74, SW76
2RotaryEncoder_SwitchPCM_marbastlib-various:ROT_Alps_EC11E-SwitchSW82, SW83
2SW_PushPCM_marbastlib-mx:SW_MX_1.75uSW45, SW57
1MX_stabPCM_marbastlib-mx:STAB_MX_P_5uS2
1MX_stabPCM_marbastlib-mx:STAB_MX_P_2.25uS1
1RaspberryPi_PicoModule:RaspberryPi_Pico_Common_THTA1

Similar boards

  • 2 layers344 × 124.5 mmUniversalTKL, the printed circuit board in 3D

    UniversalTKL

    ojthetiny/OpenTKL

    Fully Open source TKL keyboard

    175 parts103GPL-3.0
  • 2 layers99.5 × 83.1 mmFrank pga, the printed circuit board in 3D

    Frank pga

    rh1tech/frank

    RP2350 Based Hardware Emulation Platform

    175 parts66GPL-3.0
  • 2 layers182.8 × 158.9 mmErgodox BLE, the printed circuit board in 3D

    Ergodox BLE

    harshitgoel96/Ergodox_BLE

    PCB to make Ergodox work with bluemicro and protonc

    175 parts40GPL-3.0
  • 2 layers82.8 × 63 mmBldc BMS, the printed circuit board in 3D

    Bldc BMS

    mpater/bldc-BMS

    Battery management system for a VESC

    175 parts26
  • 2 layers110 × 67 mmMistle gw3a 20, the printed circuit board in 3D

    Mistle gw3a 20

    MiSTle-Dev/Boards

    Custom board designs for MiSTle projects

    175 parts23
  • 2 layers79 × 89 mmBms v1, the printed circuit board in 3D

    Bms v1

    azerimaker/BMS_3-5S

    3-5S Battery Management System based on TI bq76920 IC and MSP430 uC.

    175 parts22
  • 2 layers475 × 139.9 mmSkogaslider main pcb, the printed circuit board in 3D

    Skogaslider main pcb

    skogaby/skogaslider

    Firmware, CAD, and PCB files for the skogaslider, an RP2040-based controller to simulate Chunithm's gameplay experience

    175 parts18MIT
  • 2 layers100 × 100 mmHC4 KiCad, the printed circuit board in 3D

    HC4 KiCad

    nasu8151/HC4

    Schematics and board of HC4 E (E means "for Education").

    175 parts8

Questions

How big is the MyKeeb PCB?

It measures 395.7 × 137.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the MyKeeb use?

175 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MyKeeb KiCad files?

From the Random1011010/My-Cool-Keeb repository on GitHub, at the commit this page was made from: the board is PCB Files/MyKeeb.kicad_pcb and its schematic PCB Files/MyKeeb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the MyKeeb design in my own project?

Its repository states no licence, so its author keeps all rights: ask Random1011010 before reusing the design.