

KiCad schematic and PCB design of an Advanced Switched-Inductor Z-Source Converter (ASIZSC).
- Size
- 170 × 81 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 9
- Pads
- 42
- Tracks, vias
- 82, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 22 Aug 2026
- Updated
- 22 Aug 2026
Overview
ASIZSC is an open-source printed circuit board by Ramprasad69975, from the Ramprasad69975/ASIZSC-Converter-Design repository on GitHub, published under the MIT licence. It is a 2-layer board of 170 × 81 mm with 24 parts on 9 nets, routed with 82 tracks and 0 vias.
It is built around the IRFP460. Its parts include 5 connectors, 4 resistors, 4 inductors, 3 capacitors and 3 transistors.
Main components
1README
README.mdASIZSC Converter – Simulation & PCB Design
Overview
This project documents the step-by-step development of a power electronics converter, starting from a basic Boost Converter and progressing toward the design of an Advanced Switched-Inductor Z-Source Converter (ASIZSC).
The work was carried out in three major stages:
- Basic Boost Converter design and analysis
- ASIZSC converter modelling and simulation in MATLAB/Simulink
- Schematic and PCB design of the ASIZSC converter using KiCad
The project helped in understanding the transition from converter-level concepts and simulation to practical hardware-oriented PCB design.
Project Development
Stage 1 – Basic Boost Converter
The project initially started with the design and analysis of a conventional Boost Converter.
The basic converter was studied to understand:
- Boost converter operating principle
- Inductor and capacitor selection
- MOSFET switching
- Duty-cycle control
- Output voltage characteristics
- Continuous conduction operation
- Switching behaviour
The converter was modelled and analysed before moving toward the more advanced ASIZSC topology.
Stage 2 – ASIZSC Converter Simulation
After studying the conventional Boost Converter, the project was extended to an Advanced Switched-Inductor Z-Source Converter (ASIZSC).
The ASIZSC converter was modelled and simulated using MATLAB/Simulink.
The simulation involved:
- Switched-inductor network
- MOSFET switching stage
- Diode network
- Capacitor network
- Output filtering
- PWM-based switching
- Analysis of input and output behaviour
MATLAB/Simulink was used to study the converter operation and verify the circuit behaviour before proceeding to PCB development.
Stage 3 – ASIZSC Schematic & PCB Design
After completing the converter-level simulation, the ASIZSC circuit was translated into a practical hardware design using KiCad.
The schematic was developed with:
- Three IRFP460 MOSFETs
- MUR640 diodes
- Switched-inductor networks
- Input and output capacitors
- Gate-driver interfaces
- Output filtering
- Load connection
The schematic was then converted into a PCB layout with consideration for component placement, power routing, high-current paths, and external gate-driver connections.
Key Features
- Conventional Boost Converter study as the starting point
- Advanced Switched-Inductor Z-Source Converter topology
- MATLAB/Simulink converter simulation
- 3-MOSFET switching stage
- External gate-driver interface
- Custom footprints for large inductors
- Power-oriented PCB routing
- Through-hole and SMD components
- 3D PCB visualization
- Gerber files prepared for fabrication
Hardware
- IRFP460 MOSFET × 3
- MUR640 diode × 2
- 80 µH inductors × 2
- 1 mH inductors × 2
- 33 µF capacitors × 2
- 330 µF output capacitor
- 144 Ω load resistor
- External gate-driver interface
Tools Used
Simulation
- MATLAB
- Simulink
PCB Design
- KiCad Schematic Editor
- KiCad PCB Editor
- KiCad 3D Viewer
- KiCad Gerber Viewer
Design Workflow
Basic Boost Converter
↓
Converter Analysis
↓
ASIZSC Converter Development
↓
MATLAB/Simulink Simulation
↓
Circuit Schematic
↓
Footprint Assignment
↓
PCB Component Placement
↓
PCB Routing
↓
3D PCB Verification
↓
Gerber GenerationParts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10e3 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3 |
| 3 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J1, J2, J3 |
| 3 | IRFP460 | Package_TO_SOT_THT:TO-247-3_Vertical | Q1, Q2, Q3 |
| 2 | 1e-3 | Inductor_THT:L_Radial_D10.0mm_P5.00mm_Fastron_07M | L3, L4 |
| 2 | 33e-6 | Capacitor_THT:C_Radial_D8.0mm_H7.0mm_P3.50mm | C1, C2 |
| 2 | 80e-6 | Inductor_THT:L_THT_D35mm_P20mm | L1, L2 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4, J5 |
| 2 | MUR640 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D1, D2 |
| 1 | 144 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R0 |
| 1 | 330e-6 | Capacitor_THT:C_Radial_D16.0mm_H31.5mm_P7.50mm | C0 |
| 1 | LOGO | LOGO | G*** |
The 22 most common of 24 parts.
Similar boards
- 2 layers88 × 94.3 mm

- 4 layers128 × 72.5 mm

Flyback Driver V1
Operationorange01/Flyback-Driver
driver for high voltage flyback transformer
120 parts1 - 2 layers108 × 72.6 mm

HFDRSSTC
Firestorm108/HFDRSSTC-Plasma-Flame-Generator-
A plasma flame generator, or high frequency dual resonant solid state tesla coil! It uses some really clever electronics to achieve this, and is a staple in plasma physics, being able to produce 4" flames at less than…
23 parts - 2 layers44.8 × 77.5 mm

Mini SSTC
Firestorm108/mini-SSTC
A miniature CW SSTC driver! Fully through hole components and can be made for extremely cheap.
12 parts - 2 layers130 × 94 mm

- 2 layers56 × 65 mm

SeaTalk1
dotnet/iot
This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.
24 parts2.4kMIT - 2 layers26.2 × 45.5 mm

PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 2 layers58 × 35.5 mm

Questions
How big is the ASIZSC PCB?
It measures 170 × 81 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ASIZSC use?
24 parts, built around the IRFP460. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ASIZSC KiCad files?
From the Ramprasad69975/ASIZSC-Converter-Design repository on GitHub, at the commit this page was made from: the board is Project/ASIZSC.kicad_pcb and its schematic Project/ASIZSC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ASIZSC design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).