Skip to the content
2 layers44.4 × 21 mmGenericEsp01Board THT, the printed circuit board in 3D

ESP 01 - Generic board

Size
44.4 × 21 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
11
Pads
35
Tracks, vias
56, 0
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
8 Apr 2022
Updated
23 Jul 2022

Overview

GenericEsp01Board THT is an open-source printed circuit board by RafaelEstevamReis, from the RafaelEstevamReis/Esp01GenericBoard repository on GitHub, published under the MIT licence. It is a 2-layer board of 44.4 × 21 mm with 13 parts on 11 nets, routed with 56 tracks and 0 vias.

It is built around the AMS1117. Its parts include 5 resistors, 2 capacitors and 2 ICs.

Main components

1

README

README.md

Esp01GenericBoard

ESP 01 - Generic board

  • 5v DC IN
  • 5v Serial
  • Exposed GPIO0 and GPIO2 with 3v3 and GND connectors

This is an image

This is an image

Parts

13
QtyValueFootprintReferences
31kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3, R4, R5
210kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR1, R2
1100ufCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC1
110uFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC2
15vSerialConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalTX RX
1AMS1117Package_TO_SOT_THT:TO-220-3_VerticalU2
1DC INTestPoint:TestPoint_2Pads_Pitch5.08mm_Drill1.3mmGND 5v
1ESPESP:ESP-01U1
1IO0Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical3v3 IO0 GND
1IO2Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical3v3 IO2 GND

More from RafaelEstevamReis/Esp01GenericBoard

1
  • 2 layers43.8 × 21 mmGenericEsp01Board, the printed circuit board in 3D

    GenericEsp01Board

    RafaelEstevamReis/Esp01GenericBoard

    ESP 01 - Generic board

    13 parts2MIT

Similar boards

  • 2 layers74.4 × 51.2 mmEsp32-wroom timer, the printed circuit board in 3D

    Esp32-wroom timer

    AlessandroAU/Chorus32-ESP32LapTimer

    This is an ESP32 port of the popular Chorus RF Laptimer

    66 parts102GPL-3.0
  • 2 layers44 × 20.5 mmQrng, the printed circuit board in 3D

    Qrng

    Spooky-Manufacturing/QRNG

    Quantum Random Number Generator

    29 parts86GPL-3.0
  • 4 layers125 × 90 mmAnalog board, the printed circuit board in 3D

    Analog board

    EERNINUO/ArbWave30

    ArbWave30 – 30MHz 任意波形发生器 | FPGA + 高速DAC | SCPI 可控

    295 parts53GPL-3.0
  • 2 layers100 × 45 mmTranspOtterNG, the printed circuit board in 3D

    TranspOtterNG

    Jana-Marie/transpOtterNG

    Next Generation of TranspOtter.

    63 parts51
  • 2 layers85 × 56 mmBasicengine, the printed circuit board in 3D

    Basicengine

    uli/basicengine-pcb

    Schematics and PCB layout for the BASIC Engine home computer

    115 parts48
  • 2 layers230 × 116 mmCvocd banana, the printed circuit board in 3D

    Cvocd banana

    hotchk155/cvocd.a

    176 parts38
  • 2 layers22 × 71 mmCircut, the printed circuit board in 3D

    Circut

    larry-wong/tiny_sensor

    基于 ESP32-S3 的温湿度 / 光照 / 人体存在传感器和红外发射器。

    18 parts34
  • 2 layers89.6 × 79 mmTDR 5351 core, the printed circuit board in 3D

    TDR 5351 core

    MR-DOS/TDR_diploma_thesis

    Time domain reflectometer. Includes Hardware, firmware and GUI in Octave. Also a diploma thesis.

    199 parts33GPL-3.0

Questions

How big is the GenericEsp01Board THT PCB?

It measures 44.4 × 21 mm and has 2 copper layers, 1.6 mm thick.

What parts does the GenericEsp01Board THT use?

13 parts, built around the AMS1117. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the GenericEsp01Board THT KiCad files?

From the RafaelEstevamReis/Esp01GenericBoard repository on GitHub, at the commit this page was made from: the board is GenericEsp01Board/GenericEsp01Board_THT.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the GenericEsp01Board THT design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).