

RS232-Metex M3850D
Repository for projects regarding my Metex/Voltcraft M3850D
- Size
- 49 × 35 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 6
- Pads
- 16
- Tracks, vias
- 43, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 8 Nov 2024
- Updated
- 18 Nov 2024
Overview
RS232-Metex M3850D is an open-source printed circuit board by Race666, from the Race666/Metex-M3850D repository on GitHub. It is a 2-layer board of 49 × 35 mm with 12 parts on 6 nets, routed with 43 tracks and 0 vias.
It is built around the BC558. Its parts include 9 connectors, 2 resistors and 1 transistor.
Main components
1README
readme.mdMetex / Voltcraft Projects
Project 1: A simple powershell library to read values from the multimeter
Usage of the library: Source the library
. .\libmetex.ps1Create a new instance
$Metex=new-object MetexM3850D("COM5")Open the COM Port
$Metex.Open()Read Measures
$Metex.ReadMeasureSynchron()
$MeasureResult=$Metex.ReadMeasureSynchron()Output should be something like this
MeasuringUnit : Diode
Value : 0
RawMeasureString : DI OL mV
Result : Overload
Unit : V
RawValue : OL
RawUnit : mV
MeasuringUnit : Capacity
Value : 4E-12
RawMeasureString : CA 0.004 nF
Result : OK
Unit : F
RawValue : 0.004
RawUnit : nF
MeasuringUnit : CurrentDC
Value : -1E-07
RawMeasureString : DC -000.1 uA
Result : OK
Unit : A
RawValue : -000.1
RawUnit : uAClose the COM Port
$Metex.Close()Project 2: An adapter to connect a multimeter by a UART to USB Converter (CB2102) to a PC
The Kicad project is a simple converte to connect a M3850D by a TTL UART to USB Converter to PC.
The Description of the Serial port pins of the Multimeter:
RxD and TxD Ports are MAX232 compatible. Means -12V = High and +12V is Low Level.
Therefore the ports must be inverted (done by Transistor Q1) to deal with a TTL USB adapter. This is only necessary for RxD because to start a measurement read, only a falling rise at TxD port is requiered, indepentend which character is send to the multimeter.
The multimeter serial port is isolated by optocouplers from the multimeter. A supply voltage is needed.
DTR and RTS Ports are just used for the power supply of the optocouplers not for a serial handshake.
In my test a 5V supply is sufficent. RTS=GND DTR=5V
This is the schmetic:

Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | GND | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Horizontal | J5, J8 |
| 2 | RxD | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Horizontal | J1, J7 |
| 2 | TxD | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Horizontal | J4, J6 |
| 1 | 2.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 220R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 5V | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Horizontal | J9 |
| 1 | BC558 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | DTR | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Horizontal | J2 |
| 1 | RTS | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Horizontal | J3 |
Similar boards
- 4 layers99.6 × 99.8 mm

- 2 layers335 × 218.6 mm

- 2 layers90.8 × 22.9 mm

- 2 layers239.6 × 239.9 mm

- 2 layers40.3 × 44.2 mm

MiniWhip
oe2lsp/miniWhip
miniWhip Antenna, E-Field Antenna, capacitive antenna, DXLwhip, DXL-miniWhip, DXLminiWhip
41 parts6GPL-2.0 - 2 layers98 × 135 mm

- 2 layers242.5 × 102.5 mm

- 2 layers100 × 100 mm

Questions
How big is the RS232-Metex M3850D PCB?
It measures 49 × 35 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RS232-Metex M3850D use?
12 parts, built around the BC558. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RS232-Metex M3850D KiCad files?
From the Race666/Metex-M3850D repository on GitHub, at the commit this page was made from: the board is UART2USB/RS232-Metex-M3850D.kicad_pcb and its schematic UART2USB/RS232-Metex-M3850D.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RS232-Metex M3850D design in my own project?
Its repository states no licence, so its author keeps all rights: ask Race666 before reusing the design.