Skip to the content
2 layers65.7 × 86.3 mmIF GBP-02, the printed circuit board in 3D

The full schematic and gerbers for the Nintendo Gameboy Printer PCB revision 02

Size
65.7 × 86.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
93
Nets
112
Pads
374
Tracks, vias
1,135, 65
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
11 Sep 2022
Updated
30 Sep 2022

Overview

IF GBP-02 is an open-source printed circuit board by RWeick, from the RWeick/IF-GBP-02-Gameboy-Printer repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 65.7 × 86.3 mm with 93 parts on 112 nets, routed with 1,135 tracks and 65 vias.

Its parts include 30 resistors, 14 capacitors, 12 transistors, 7 diodes and 6 ICs. It belongs with the retro computing and games boards of this library.

README

README.md

IF-GBP-02-Gameboy-Printer

The full schematic and gerbers for the Nintendo Gameboy Printer PCB revision 02

This schematic is verified to be 100% complete and accurate.

PCB Thickness: 1.2 mm

image image

Parts

93
QtyValueFootprintReferences
11103Gameboy Printer:SMD Cap-ResR6, R11, R14, R16, R21, R24, R29, R30, R32, R33, R34
8100 nFGameboy Printer:SMD Cap-ResC5, C6, C14, C15, C16, C17, C18, C19
41002Gameboy Printer:SMD Cap-ResR9, R10, R26, R28
4102Gameboy Printer:SMD Cap-ResR7, R13, R17, R27
4104Gameboy Printer:Resistor PackNR1, NR2, NR3, NR4
4240Gameboy Printer:SMD Cap-ResR2, R3, R4, R5
4BR - BCW60DRGameboy Printer:TransistorQ3, Q8, Q10, Q11
3clipboard:867ee1a9-3078-458d-9784-2b6d66f4ccf8D1Diagram, D3Diagram, D5Diagram
310 nFGameboy Printer:SMD Cap-ResC4, C12, C20
3FR - 2SA1037Gameboy Printer:TransistorQ2, Q4, Q9
3MountingHole_2.2mm_M2_ISO7380MountingHole:MountingHole_2.2mm_M2_ISO7380Hole1, Hole5, Hole7
3MountingHole_3.7mmMountingHole:MountingHole_3.7mmHole2, Hole4, Hole6
2222Gameboy Printer:SMD Cap-ResR35, R36
224 - DTC114ECAGameboy Printer:TransistorQ5, Q14
2472Gameboy Printer:SMD Cap-ResR8, R12
2DIODEGameboy Printer:Little DiodeD3, D5
2MountingHole_2.2mm_M2MountingHole:MountingHole_2.2mm_M2Hole3, Hole8
2TD62593AGameboy Printer:TD62593AIC5, IC6
11000 uF 16vGameboy Printer:C1 1000 uF CapC1
11000 uF 6.3vGameboy Printer:C2 1000 uF CapC2
1102C Thermal FuseGameboy Printer:F2 Thermal FuseF2
1104Gameboy Printer:SMD Cap-ResR22
1220 uF 6.3vGameboy Printer:C3 220 uF CapC3
1221Gameboy Printer:SMD Cap-ResR1
1330K 33uHGameboy Printer:L2 InductorL2
1431Gameboy Printer:SMD Cap-ResR23
1458F - FMMT458TA SOT23-5Gameboy Printer:SOT23-5 TransistorIC7
14A 8D1 - BGA6489Gameboy Printer:SOT89 TransistorIC1
1560K 56uHGameboy Printer:L1 InductorL1
18 MHzGameboy Printer:8 MHz CrystalX1
1B1326Gameboy Printer:B1326Q1
1BF RD - RT9169Gameboy Printer:SOT89 TransistorQ6
1Battery ConnectorsGameboy Printer:Battery ConnectorsJ2
1CF RD - 2SC3650Gameboy Printer:SOT89 TransistorQ7
1FNGameboy Printer:F1 FuseF1
1GB Printer Print HeadGameboy Printer:Printer Head ConnectorCN2
1Gameboy Link PortGameboy Printer:Gameboy Link PortCN3
1LEDGameboy Printer:LEDLED1
1LH5164Gameboy Printer:LH5164 SRAMIC3
1Print MotorGameboy Printer:Printer Motor ConnectorCN1
1S3 8AGameboy Printer:D1 DiodeD1
1SW_DPDT_x2Gameboy Printer:Slide SwitchSW2
1SW_MEC_5EGameboy Printer:Feed ButtonSW1
1TMP87CM40AFGameboy Printer:TMP87CM40AFIC2
1Thermistor_USGameboy Printer:TH1 ThermistorTH1

Similar boards

  • 2 layers390 × 93 mmPots, the printed circuit board in 3D

    Pots

    shanteacontrols/OpenDeck

    A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

    93 parts960Apache-2.0
  • 2 layers217.6 × 68.1 mmKeezyboost40, the printed circuit board in 3D

    Keezyboost40

    ChrisChrisLoLo/keezyboost40

    4x10 ortholinear with an LCD in the middle. Uses the Raspberry Pi Pico, as well as Rust firmware

    93 parts202CC-BY-SA-4.0
  • 2 layers100 × 100 mmControl, the printed circuit board in 3D

    Control

    imihajlow/ccpu

    A 8-bit computer made of 74xx series logic gates and memory ICs.

    93 parts145
  • 2 layers147 × 80 mmController, the printed circuit board in 3D

    Controller

    voltlog/Valve-Actuator

    If you are looking for sources of previous revisions (revA, revB, revC) checkout the different branches of this repo.

    93 parts108GPL-3.0
  • 2 layers276 × 87.1 mmMolekula2, the printed circuit board in 3D

    Molekula2

    zzeneg/molekula

    Framework for building ergo keyboards

    93 parts98MIT
  • 2 layers30 × 46 mmXESC, the printed circuit board in 3D

    XESC

    embeddedalpha/PCB-Design

    Repository for PCB Design Projects

    93 parts77MIT
  • 2 layers145.1 × 107.7 mmAurora l, the printed circuit board in 3D

    Aurora l

    Musab-Hassan/aurora_keyboard

    A gorgeous split wireless ortholinear keyboard that you can build yourself.

    93 parts64GPL-3.0
  • 2 layersPsoc5power2, the printed circuit board in 3D

    Psoc5power2

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    93 parts59

Questions

How big is the IF GBP-02 PCB?

It measures 65.7 × 86.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the IF GBP-02 use?

93 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the IF GBP-02 KiCad files?

From the RWeick/IF-GBP-02-Gameboy-Printer repository on GitHub, at the commit this page was made from: the board is IF-GBP-02.kicad_pcb and its schematic IF-GBP-02.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the IF GBP-02 design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).