2 layers55.9 × 43.2 mm
2 layers53.5 × 89.8 mm
All data necessary to produce a Mega Memory Card for the Gameboy Color
- Size
- 53.5 × 89.8 mm
- Copper layers
- 2
- Thickness
- 0.8 mm
- Parts
- 14
- Nets
- 62
- Pads
- 200
- Tracks, vias
- 1,192, 129
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 8 Jul 2022
- Updated
- 15 Sep 2024
Overview
REF1347 is an open-source printed circuit board by RWeick, from the RWeick/Gameboy-Color-Megamem-Card repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 53.5 × 89.8 mm with 14 parts on 62 nets, routed with 1,192 tracks and 129 vias.
It is built around the PALCE20V8H-25JC/4, PIC12C508A-04/P and 74HC373D. Its parts include 5 ICs, 3 connectors, 2 capacitors, 2 resistors and 1 diode. It belongs with the retro computing and games boards and the PIC boards of this library.
Main components
3
PALCE20V8H-25JC/4
PLCC-28(11.5x11.5)25ns 4.75V~5.25V 8 PAL PAL Supports UID protection PLCC-28(11.5x11.5) Programmable Logic Device (CPLDs/FPGAs)LatticeProgrammable Logic Device (CPLDs/FPGAs)
PIC12C508A-04/P
DIP-80℃~+70℃ 25Byte 3V~5.5V 4MHz 5 768Byte 8 Bit Built-in OTP PIC Power-on reset (POR)、Watchdog reset、Built-in general-purpose timer DIP-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
74HC373D
SOIC-20-300mil-40℃~+125℃ 10ns 12ns 2V~6V 5ns 7.8mA 7.8mA 74HC 8 8uA D Latch Tri-State SOIC-20-300mil Latches ROHSNexperiaLatches
README
README.mdGameboy-Color-Megamem-Card
All data necessary to produce a Mega Memory Card for the Gameboy Color. Be sure to use SLA Resin if you print the cartridge slot connector or the shells.
PCB Thickness: 0.8 mm
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100 nF | Gameboy:100nf Capacitor | C1, C2 |
| 1 | Gameboy:100nf Capacitor | R2 | |
| 1 | 10k Ohm | Gameboy:100nf Capacitor | R1 |
| 1 | 74HC373 | Gameboy:74HC373 | U3 |
| 1 | ATMEL AT27C010 | Gameboy:SST 28SF040 | U2 |
| 1 | Cart_Edge_Connector | GBA:ACTUAL GAMEBOY EDGE CONNECTOR | J1 |
| 1 | Game_Edge_Connector | Gameboy:Cartridge Slot, GBC | J2 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | PALCE_20V8H-25JC/4 | Gameboy:PALCE 20V8H-25JC-4 | U4 |
| 1 | PIC12C508A | REF1329:PIC12C508A | U5 |
| 1 | SST28LF040 | Gameboy:SST 28SF040 | U1 |
| 1 | SW_DPDT_x2 | Gameboy:Switch | J3 |
The 13 most common of 14 parts.
Similar boards
- 2 layers196.3 × 118.7 mm
Motherboard
Redherring32/OpenTendo
An Open-Source HardWare (OSHW) recreation of the original 1985 front-loading NES Motherboard
100 parts860 - 4 layers64.7 × 52.2 mm
- 2 layers106.1 × 155 mm
Motherboard
Redherring32/OpenTendo-TopLoader
An Open Source HardWare (OSHW) recreation of the 1993 toploading NES motherboard (Also known as NES-101)
84 parts94 - 2 layers137.2 × 137.2 mm
- 2 layers177 × 79 mm
Elfacun v2
inmbolmie/elfacun
Hardware project to create a chess module compatible with the old Mephisto modular boards (Exclusive, Modular, München) that will provide connectivity to a wide variety of chess apps and services
66 parts4GPL-3.0 - 2 layers190 × 125 mm
68hc11
mggates39/68hc11_SBC
Building a Single Board Computer around the MC68HC11. It will include my first attempt with KiCad designing a PCB
58 parts4GPL-3.0 - 4 layers354 × 183.3 mm
DragonSTe
dragonmux/dragonSTe
A whole-cloth remake of the Atari 1040STe using modern parts and FPGAs reDIP-style for unobtanium components
339 parts3
Questions
How big is the REF1347 PCB?
It measures 53.5 × 89.8 mm and has 2 copper layers, 0.8 mm thick.
What parts does the REF1347 use?
14 parts, built around the PALCE20V8H-25JC/4, PIC12C508A-04/P and 74HC373D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the REF1347 KiCad files?
From the RWeick/Gameboy-Color-Megamem-Card repository on GitHub, at the commit this page was made from: the board is REF1347.kicad_pcb and its schematic REF1347.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the REF1347 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).